diff options
| author | Dominik Brodowski <linux@dominikbrodowski.net> | 2006-01-15 12:43:16 +0100 |
|---|---|---|
| committer | Dominik Brodowski <linux@dominikbrodowski.net> | 2006-03-31 17:15:55 +0200 |
| commit | 70294b468302fd7a0a99dad935c7ba5322989345 (patch) | |
| tree | e54b0b7c85517ef717f3755e06ca08fbb0f5937e /drivers/net/wireless/hostap/hostap_cs.c | |
| parent | 4bbed5231468014b500b048d7370a1c6c349231a (diff) | |
| download | talos-op-linux-70294b468302fd7a0a99dad935c7ba5322989345.tar.gz talos-op-linux-70294b468302fd7a0a99dad935c7ba5322989345.zip | |
[PATCH] pcmcia: remove unneeded Vcc pseudo setting
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/net/wireless/hostap/hostap_cs.c')
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_cs.c | 19 |
1 files changed, 7 insertions, 12 deletions
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 0fb625185452..69024bfb5bba 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -512,7 +512,6 @@ static int prism2_attach(struct pcmcia_device *p_dev) memset(link, 0, sizeof(dev_link_t)); PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); - link->conf.Vcc = 33; link->conf.IntType = INT_MEMORY_AND_IO; link->handle = p_dev; @@ -603,9 +602,6 @@ static int prism2_config(dev_link_t *link) CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link->handle, &conf)); - PDEBUG(DEBUG_HW, "%s: %s Vcc=%d (from config)\n", dev_info, - ignore_cis_vcc ? "ignoring" : "setting", conf.Vcc); - link->conf.Vcc = conf.Vcc; /* Look for an appropriate configuration table entry in the CIS */ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; @@ -650,10 +646,10 @@ static int prism2_config(dev_link_t *link) } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp1 = link->conf.Vpp2 = + link->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp1 = link->conf.Vpp2 = + link->conf.Vpp = dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ @@ -745,12 +741,11 @@ static int prism2_config(dev_link_t *link) dev->base_addr = link->io.BasePort1; /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", - dev_info, link->conf.ConfigIndex, - link->conf.Vcc / 10, link->conf.Vcc % 10); - if (link->conf.Vpp1) - printk(", Vpp %d.%d", link->conf.Vpp1 / 10, - link->conf.Vpp1 % 10); + printk(KERN_INFO "%s: index 0x%02x: ", + dev_info, link->conf.ConfigIndex); + if (link->conf.Vpp) + printk(", Vpp %d.%d", link->conf.Vpp / 10, + link->conf.Vpp % 10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq.AssignedIRQ); if (link->io.NumPorts1) |
