b43legacy: move under broadcom vendor directory

Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 0 insertions, 858 deletions

diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
deleted file mode 100644
index 482476fdb1f3..000000000000
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ /dev/null
@@ -1,858 +0,0 @@
-#ifndef B43legacy_H_
-#define B43legacy_H_
-
-#include <linux/hw_random.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/stringify.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/atomic.h>
-#include <linux/io.h>
-
-#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_driver_chipcommon.h>
-#include <linux/completion.h>
-
-#include <net/mac80211.h>
-
-#include "debugfs.h"
-#include "leds.h"
-#include "rfkill.h"
-#include "phy.h"
-
-
-#define B43legacy_IRQWAIT_MAX_RETRIES	20
-
-/* MMIO offsets */
-#define B43legacy_MMIO_DMA0_REASON	0x20
-#define B43legacy_MMIO_DMA0_IRQ_MASK	0x24
-#define B43legacy_MMIO_DMA1_REASON	0x28
-#define B43legacy_MMIO_DMA1_IRQ_MASK	0x2C
-#define B43legacy_MMIO_DMA2_REASON	0x30
-#define B43legacy_MMIO_DMA2_IRQ_MASK	0x34
-#define B43legacy_MMIO_DMA3_REASON	0x38
-#define B43legacy_MMIO_DMA3_IRQ_MASK	0x3C
-#define B43legacy_MMIO_DMA4_REASON	0x40
-#define B43legacy_MMIO_DMA4_IRQ_MASK	0x44
-#define B43legacy_MMIO_DMA5_REASON	0x48
-#define B43legacy_MMIO_DMA5_IRQ_MASK	0x4C
-#define B43legacy_MMIO_MACCTL		0x120	/* MAC control */
-#define B43legacy_MMIO_MACCMD		0x124	/* MAC command */
-#define B43legacy_MMIO_GEN_IRQ_REASON	0x128
-#define B43legacy_MMIO_GEN_IRQ_MASK	0x12C
-#define B43legacy_MMIO_RAM_CONTROL	0x130
-#define B43legacy_MMIO_RAM_DATA		0x134
-#define B43legacy_MMIO_PS_STATUS		0x140
-#define B43legacy_MMIO_RADIO_HWENABLED_HI	0x158
-#define B43legacy_MMIO_SHM_CONTROL	0x160
-#define B43legacy_MMIO_SHM_DATA		0x164
-#define B43legacy_MMIO_SHM_DATA_UNALIGNED	0x166
-#define B43legacy_MMIO_XMITSTAT_0		0x170
-#define B43legacy_MMIO_XMITSTAT_1		0x174
-#define B43legacy_MMIO_REV3PLUS_TSF_LOW	0x180 /* core rev >= 3 only */
-#define B43legacy_MMIO_REV3PLUS_TSF_HIGH	0x184 /* core rev >= 3 only */
-#define B43legacy_MMIO_TSF_CFP_REP	0x188
-#define B43legacy_MMIO_TSF_CFP_START	0x18C
-/* 32-bit DMA */
-#define B43legacy_MMIO_DMA32_BASE0	0x200
-#define B43legacy_MMIO_DMA32_BASE1	0x220
-#define B43legacy_MMIO_DMA32_BASE2	0x240
-#define B43legacy_MMIO_DMA32_BASE3	0x260
-#define B43legacy_MMIO_DMA32_BASE4	0x280
-#define B43legacy_MMIO_DMA32_BASE5	0x2A0
-/* 64-bit DMA */
-#define B43legacy_MMIO_DMA64_BASE0	0x200
-#define B43legacy_MMIO_DMA64_BASE1	0x240
-#define B43legacy_MMIO_DMA64_BASE2	0x280
-#define B43legacy_MMIO_DMA64_BASE3	0x2C0
-#define B43legacy_MMIO_DMA64_BASE4	0x300
-#define B43legacy_MMIO_DMA64_BASE5	0x340
-/* PIO */
-#define B43legacy_MMIO_PIO1_BASE		0x300
-#define B43legacy_MMIO_PIO2_BASE		0x310
-#define B43legacy_MMIO_PIO3_BASE		0x320
-#define B43legacy_MMIO_PIO4_BASE		0x330
-
-#define B43legacy_MMIO_PHY_VER		0x3E0
-#define B43legacy_MMIO_PHY_RADIO		0x3E2
-#define B43legacy_MMIO_PHY0		0x3E6
-#define B43legacy_MMIO_ANTENNA		0x3E8
-#define B43legacy_MMIO_CHANNEL		0x3F0
-#define B43legacy_MMIO_CHANNEL_EXT	0x3F4
-#define B43legacy_MMIO_RADIO_CONTROL	0x3F6
-#define B43legacy_MMIO_RADIO_DATA_HIGH	0x3F8
-#define B43legacy_MMIO_RADIO_DATA_LOW	0x3FA
-#define B43legacy_MMIO_PHY_CONTROL	0x3FC
-#define B43legacy_MMIO_PHY_DATA		0x3FE
-#define B43legacy_MMIO_MACFILTER_CONTROL	0x420
-#define B43legacy_MMIO_MACFILTER_DATA	0x422
-#define B43legacy_MMIO_RCMTA_COUNT	0x43C /* Receive Match Transmitter Addr */
-#define B43legacy_MMIO_RADIO_HWENABLED_LO	0x49A
-#define B43legacy_MMIO_GPIO_CONTROL	0x49C
-#define B43legacy_MMIO_GPIO_MASK		0x49E
-#define B43legacy_MMIO_TSF_CFP_PRETBTT	0x612
-#define B43legacy_MMIO_TSF_0		0x632 /* core rev < 3 only */
-#define B43legacy_MMIO_TSF_1		0x634 /* core rev < 3 only */
-#define B43legacy_MMIO_TSF_2		0x636 /* core rev < 3 only */
-#define B43legacy_MMIO_TSF_3		0x638 /* core rev < 3 only */
-#define B43legacy_MMIO_RNG		0x65A
-#define B43legacy_MMIO_POWERUP_DELAY	0x6A8
-
-/* SPROM boardflags_lo values */
-#define B43legacy_BFL_PACTRL		0x0002
-#define B43legacy_BFL_RSSI		0x0008
-#define B43legacy_BFL_EXTLNA		0x1000
-
-/* GPIO register offset, in both ChipCommon and PCI core. */
-#define B43legacy_GPIO_CONTROL		0x6c
-
-/* SHM Routing */
-#define	B43legacy_SHM_SHARED		0x0001
-#define	B43legacy_SHM_WIRELESS		0x0002
-#define	B43legacy_SHM_HW		0x0004
-#define	B43legacy_SHM_UCODE		0x0300
-
-/* SHM Routing modifiers */
-#define B43legacy_SHM_AUTOINC_R		0x0200 /* Read Auto-increment */
-#define B43legacy_SHM_AUTOINC_W		0x0100 /* Write Auto-increment */
-#define B43legacy_SHM_AUTOINC_RW	(B43legacy_SHM_AUTOINC_R | \
-					 B43legacy_SHM_AUTOINC_W)
-
-/* Misc SHM_SHARED offsets */
-#define B43legacy_SHM_SH_WLCOREREV	0x0016 /* 802.11 core revision */
-#define B43legacy_SHM_SH_HOSTFLO	0x005E /* Hostflags ucode opts (low) */
-#define B43legacy_SHM_SH_HOSTFHI	0x0060 /* Hostflags ucode opts (high) */
-/* SHM_SHARED crypto engine */
-#define B43legacy_SHM_SH_KEYIDXBLOCK	0x05D4 /* Key index/algorithm block */
-/* SHM_SHARED beacon/AP variables */
-#define B43legacy_SHM_SH_DTIMP		0x0012 /* DTIM period */
-#define B43legacy_SHM_SH_BTL0		0x0018 /* Beacon template length 0 */
-#define B43legacy_SHM_SH_BTL1		0x001A /* Beacon template length 1 */
-#define B43legacy_SHM_SH_BTSFOFF	0x001C /* Beacon TSF offset */
-#define B43legacy_SHM_SH_TIMPOS		0x001E /* TIM position in beacon */
-#define B43legacy_SHM_SH_BEACPHYCTL	0x0054 /* Beacon PHY TX control word */
-/* SHM_SHARED ACK/CTS control */
-#define B43legacy_SHM_SH_ACKCTSPHYCTL	0x0022 /* ACK/CTS PHY control word */
-/* SHM_SHARED probe response variables */
-#define B43legacy_SHM_SH_PRTLEN		0x004A /* Probe Response template length */
-#define B43legacy_SHM_SH_PRMAXTIME	0x0074 /* Probe Response max time */
-#define B43legacy_SHM_SH_PRPHYCTL	0x0188 /* Probe Resp PHY TX control */
-/* SHM_SHARED rate tables */
-#define B43legacy_SHM_SH_OFDMDIRECT	0x0480 /* Pointer to OFDM direct map */
-#define B43legacy_SHM_SH_OFDMBASIC	0x04A0 /* Pointer to OFDM basic rate map */
-#define B43legacy_SHM_SH_CCKDIRECT	0x04C0 /* Pointer to CCK direct map */
-#define B43legacy_SHM_SH_CCKBASIC	0x04E0 /* Pointer to CCK basic rate map */
-/* SHM_SHARED microcode soft registers */
-#define B43legacy_SHM_SH_UCODEREV	0x0000 /* Microcode revision */
-#define B43legacy_SHM_SH_UCODEPATCH	0x0002 /* Microcode patchlevel */
-#define B43legacy_SHM_SH_UCODEDATE	0x0004 /* Microcode date */
-#define B43legacy_SHM_SH_UCODETIME	0x0006 /* Microcode time */
-#define B43legacy_SHM_SH_SPUWKUP	0x0094 /* pre-wakeup for synth PU in us */
-#define B43legacy_SHM_SH_PRETBTT	0x0096 /* pre-TBTT in us */
-
-#define B43legacy_UCODEFLAGS_OFFSET     0x005E
-
-/* Hardware Radio Enable masks */
-#define B43legacy_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
-#define B43legacy_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
-
-/* HostFlags. See b43legacy_hf_read/write() */
-#define B43legacy_HF_SYMW		0x00000002 /* G-PHY SYM workaround */
-#define B43legacy_HF_GDCW		0x00000020 /* G-PHY DV cancel filter */
-#define B43legacy_HF_OFDMPABOOST	0x00000040 /* Enable PA boost OFDM */
-#define B43legacy_HF_EDCF		0x00000100 /* on if WME/MAC suspended */
-
-/* MacFilter offsets. */
-#define B43legacy_MACFILTER_SELF	0x0000
-#define B43legacy_MACFILTER_BSSID	0x0003
-#define B43legacy_MACFILTER_MAC		0x0010
-
-/* PHYVersioning */
-#define B43legacy_PHYTYPE_B		0x01
-#define B43legacy_PHYTYPE_G		0x02
-
-/* PHYRegisters */
-#define B43legacy_PHY_G_LO_CONTROL	0x0810
-#define B43legacy_PHY_ILT_G_CTRL	0x0472
-#define B43legacy_PHY_ILT_G_DATA1	0x0473
-#define B43legacy_PHY_ILT_G_DATA2	0x0474
-#define B43legacy_PHY_G_PCTL		0x0029
-#define B43legacy_PHY_RADIO_BITFIELD	0x0401
-#define B43legacy_PHY_G_CRS		0x0429
-#define B43legacy_PHY_NRSSILT_CTRL	0x0803
-#define B43legacy_PHY_NRSSILT_DATA	0x0804
-
-/* RadioRegisters */
-#define B43legacy_RADIOCTL_ID		0x01
-
-/* MAC Control bitfield */
-#define B43legacy_MACCTL_ENABLED	0x00000001 /* MAC Enabled */
-#define B43legacy_MACCTL_PSM_RUN	0x00000002 /* Run Microcode */
-#define B43legacy_MACCTL_PSM_JMP0	0x00000004 /* Microcode jump to 0 */
-#define B43legacy_MACCTL_SHM_ENABLED	0x00000100 /* SHM Enabled */
-#define B43legacy_MACCTL_IHR_ENABLED	0x00000400 /* IHR Region Enabled */
-#define B43legacy_MACCTL_BE		0x00010000 /* Big Endian mode */
-#define B43legacy_MACCTL_INFRA		0x00020000 /* Infrastructure mode */
-#define B43legacy_MACCTL_AP		0x00040000 /* AccessPoint mode */
-#define B43legacy_MACCTL_RADIOLOCK	0x00080000 /* Radio lock */
-#define B43legacy_MACCTL_BEACPROMISC	0x00100000 /* Beacon Promiscuous */
-#define B43legacy_MACCTL_KEEP_BADPLCP	0x00200000 /* Keep bad PLCP frames */
-#define B43legacy_MACCTL_KEEP_CTL	0x00400000 /* Keep control frames */
-#define B43legacy_MACCTL_KEEP_BAD	0x00800000 /* Keep bad frames (FCS) */
-#define B43legacy_MACCTL_PROMISC	0x01000000 /* Promiscuous mode */
-#define B43legacy_MACCTL_HWPS		0x02000000 /* Hardware Power Saving */
-#define B43legacy_MACCTL_AWAKE		0x04000000 /* Device is awake */
-#define B43legacy_MACCTL_TBTTHOLD	0x10000000 /* TBTT Hold */
-#define B43legacy_MACCTL_GMODE		0x80000000 /* G Mode */
-
-/* MAC Command bitfield */
-#define B43legacy_MACCMD_BEACON0_VALID	0x00000001 /* Beacon 0 in template RAM is busy/valid */
-#define B43legacy_MACCMD_BEACON1_VALID	0x00000002 /* Beacon 1 in template RAM is busy/valid */
-#define B43legacy_MACCMD_DFQ_VALID	0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */
-#define B43legacy_MACCMD_CCA		0x00000008 /* Clear channel assessment */
-#define B43legacy_MACCMD_BGNOISE	0x00000010 /* Background noise */
-
-/* 802.11 core specific TM State Low flags */
-#define B43legacy_TMSLOW_GMODE		0x20000000 /* G Mode Enable */
-#define B43legacy_TMSLOW_PLLREFSEL	0x00200000 /* PLL Freq Ref Select */
-#define B43legacy_TMSLOW_MACPHYCLKEN	0x00100000 /* MAC PHY Clock Ctrl Enbl */
-#define B43legacy_TMSLOW_PHYRESET	0x00080000 /* PHY Reset */
-#define B43legacy_TMSLOW_PHYCLKEN	0x00040000 /* PHY Clock Enable */
-
-/* 802.11 core specific TM State High flags */
-#define B43legacy_TMSHIGH_FCLOCK	0x00040000 /* Fast Clock Available */
-#define B43legacy_TMSHIGH_GPHY		0x00010000 /* G-PHY avail (rev >= 5) */
-
-#define B43legacy_UCODEFLAG_AUTODIV       0x0001
-
-/* Generic-Interrupt reasons. */
-#define B43legacy_IRQ_MAC_SUSPENDED	0x00000001
-#define B43legacy_IRQ_BEACON		0x00000002
-#define B43legacy_IRQ_TBTT_INDI		0x00000004 /* Target Beacon Transmit Time */
-#define B43legacy_IRQ_BEACON_TX_OK	0x00000008
-#define B43legacy_IRQ_BEACON_CANCEL	0x00000010
-#define B43legacy_IRQ_ATIM_END		0x00000020
-#define B43legacy_IRQ_PMQ		0x00000040
-#define B43legacy_IRQ_PIO_WORKAROUND	0x00000100
-#define B43legacy_IRQ_MAC_TXERR		0x00000200
-#define B43legacy_IRQ_PHY_TXERR		0x00000800
-#define B43legacy_IRQ_PMEVENT		0x00001000
-#define B43legacy_IRQ_TIMER0		0x00002000
-#define B43legacy_IRQ_TIMER1		0x00004000
-#define B43legacy_IRQ_DMA		0x00008000
-#define B43legacy_IRQ_TXFIFO_FLUSH_OK	0x00010000
-#define B43legacy_IRQ_CCA_MEASURE_OK	0x00020000
-#define B43legacy_IRQ_NOISESAMPLE_OK	0x00040000
-#define B43legacy_IRQ_UCODE_DEBUG	0x08000000
-#define B43legacy_IRQ_RFKILL		0x10000000
-#define B43legacy_IRQ_TX_OK		0x20000000
-#define B43legacy_IRQ_PHY_G_CHANGED	0x40000000
-#define B43legacy_IRQ_TIMEOUT		0x80000000
-
-#define B43legacy_IRQ_ALL		0xFFFFFFFF
-#define B43legacy_IRQ_MASKTEMPLATE	(B43legacy_IRQ_MAC_SUSPENDED |	\
-					 B43legacy_IRQ_TBTT_INDI |	\
-					 B43legacy_IRQ_ATIM_END |	\
-					 B43legacy_IRQ_PMQ |		\
-					 B43legacy_IRQ_MAC_TXERR |	\
-					 B43legacy_IRQ_PHY_TXERR |	\
-					 B43legacy_IRQ_DMA |		\
-					 B43legacy_IRQ_TXFIFO_FLUSH_OK | \
-					 B43legacy_IRQ_NOISESAMPLE_OK | \
-					 B43legacy_IRQ_UCODE_DEBUG |	\
-					 B43legacy_IRQ_RFKILL |		\
-					 B43legacy_IRQ_TX_OK)
-
-/* Device specific rate values.
- * The actual values defined here are (rate_in_mbps * 2).
- * Some code depends on this. Don't change it. */
-#define B43legacy_CCK_RATE_1MB		2
-#define B43legacy_CCK_RATE_2MB		4
-#define B43legacy_CCK_RATE_5MB		11
-#define B43legacy_CCK_RATE_11MB		22
-#define B43legacy_OFDM_RATE_6MB		12
-#define B43legacy_OFDM_RATE_9MB		18
-#define B43legacy_OFDM_RATE_12MB	24
-#define B43legacy_OFDM_RATE_18MB	36
-#define B43legacy_OFDM_RATE_24MB	48
-#define B43legacy_OFDM_RATE_36MB	72
-#define B43legacy_OFDM_RATE_48MB	96
-#define B43legacy_OFDM_RATE_54MB	108
-/* Convert a b43legacy rate value to a rate in 100kbps */
-#define B43legacy_RATE_TO_100KBPS(rate)	(((rate) * 10) / 2)
-
-
-#define B43legacy_DEFAULT_SHORT_RETRY_LIMIT	7
-#define B43legacy_DEFAULT_LONG_RETRY_LIMIT	4
-
-#define B43legacy_PHY_TX_BADNESS_LIMIT		1000
-
-/* Max size of a security key */
-#define B43legacy_SEC_KEYSIZE		16
-/* Security algorithms. */
-enum {
-	B43legacy_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
-	B43legacy_SEC_ALGO_WEP40,
-	B43legacy_SEC_ALGO_TKIP,
-	B43legacy_SEC_ALGO_AES,
-	B43legacy_SEC_ALGO_WEP104,
-	B43legacy_SEC_ALGO_AES_LEGACY,
-};
-
-/* Core Information Registers */
-#define B43legacy_CIR_BASE                0xf00
-#define B43legacy_CIR_SBTPSFLAG           (B43legacy_CIR_BASE + 0x18)
-#define B43legacy_CIR_SBIMSTATE           (B43legacy_CIR_BASE + 0x90)
-#define B43legacy_CIR_SBINTVEC            (B43legacy_CIR_BASE + 0x94)
-#define B43legacy_CIR_SBTMSTATELOW        (B43legacy_CIR_BASE + 0x98)
-#define B43legacy_CIR_SBTMSTATEHIGH       (B43legacy_CIR_BASE + 0x9c)
-#define B43legacy_CIR_SBIMCONFIGLOW       (B43legacy_CIR_BASE + 0xa8)
-#define B43legacy_CIR_SB_ID_HI            (B43legacy_CIR_BASE + 0xfc)
-
-/* sbtmstatehigh state flags */
-#define B43legacy_SBTMSTATEHIGH_SERROR		0x00000001
-#define B43legacy_SBTMSTATEHIGH_BUSY		0x00000004
-#define B43legacy_SBTMSTATEHIGH_TIMEOUT		0x00000020
-#define B43legacy_SBTMSTATEHIGH_G_PHY_AVAIL	0x00010000
-#define B43legacy_SBTMSTATEHIGH_COREFLAGS	0x1FFF0000
-#define B43legacy_SBTMSTATEHIGH_DMA64BIT	0x10000000
-#define B43legacy_SBTMSTATEHIGH_GATEDCLK	0x20000000
-#define B43legacy_SBTMSTATEHIGH_BISTFAILED	0x40000000
-#define B43legacy_SBTMSTATEHIGH_BISTCOMPLETE	0x80000000
-
-/* sbimstate flags */
-#define B43legacy_SBIMSTATE_IB_ERROR		0x20000
-#define B43legacy_SBIMSTATE_TIMEOUT		0x40000
-
-#define PFX		KBUILD_MODNAME ": "
-#ifdef assert
-# undef assert
-#endif
-#ifdef CONFIG_B43LEGACY_DEBUG
-# define B43legacy_WARN_ON(x)	WARN_ON(x)
-# define B43legacy_BUG_ON(expr)						\
-	do {								\
-		if (unlikely((expr))) {					\
-			printk(KERN_INFO PFX "Test (%s) failed\n",	\
-					      #expr);			\
-			BUG_ON(expr);					\
-		}							\
-	} while (0)
-# define B43legacy_DEBUG	1
-#else
-/* This will evaluate the argument even if debugging is disabled. */
-static inline bool __b43legacy_warn_on_dummy(bool x) { return x; }
-# define B43legacy_WARN_ON(x)	__b43legacy_warn_on_dummy(unlikely(!!(x)))
-# define B43legacy_BUG_ON(x)	do { /* nothing */ } while (0)
-# define B43legacy_DEBUG	0
-#endif
-
-
-struct net_device;
-struct pci_dev;
-struct b43legacy_dmaring;
-struct b43legacy_pioqueue;
-
-/* The firmware file header */
-#define B43legacy_FW_TYPE_UCODE	'u'
-#define B43legacy_FW_TYPE_PCM	'p'
-#define B43legacy_FW_TYPE_IV	'i'
-struct b43legacy_fw_header {
-	/* File type */
-	u8 type;
-	/* File format version */
-	u8 ver;
-	u8 __padding[2];
-	/* Size of the data. For ucode and PCM this is in bytes.
-	 * For IV this is number-of-ivs. */
-	__be32 size;
-} __packed;
-
-/* Initial Value file format */
-#define B43legacy_IV_OFFSET_MASK	0x7FFF
-#define B43legacy_IV_32BIT		0x8000
-struct b43legacy_iv {
-	__be16 offset_size;
-	union {
-		__be16 d16;
-		__be32 d32;
-	} data __packed;
-} __packed;
-
-#define B43legacy_PHYMODE(phytype)	(1 << (phytype))
-#define B43legacy_PHYMODE_B		B43legacy_PHYMODE	\
-					((B43legacy_PHYTYPE_B))
-#define B43legacy_PHYMODE_G		B43legacy_PHYMODE	\
-					((B43legacy_PHYTYPE_G))
-
-/* Value pair to measure the LocalOscillator. */
-struct b43legacy_lopair {
-	s8 low;
-	s8 high;
-	u8 used:1;
-};
-#define B43legacy_LO_COUNT	(14*4)
-
-struct b43legacy_phy {
-	/* Possible PHYMODEs on this PHY */
-	u8 possible_phymodes;
-	/* GMODE bit enabled in MACCTL? */
-	bool gmode;
-
-	/* Analog Type */
-	u8 analog;
-	/* B43legacy_PHYTYPE_ */
-	u8 type;
-	/* PHY revision number. */
-	u8 rev;
-
-	u16 antenna_diversity;
-	u16 savedpctlreg;
-	/* Radio versioning */
-	u16 radio_manuf;	/* Radio manufacturer */
-	u16 radio_ver;		/* Radio version */
-	u8 calibrated:1;
-	u8 radio_rev;		/* Radio revision */
-
-	bool dyn_tssi_tbl;	/* tssi2dbm is kmalloc()ed. */
-
-	/* ACI (adjacent channel interference) flags. */
-	bool aci_enable;
-	bool aci_wlan_automatic;
-	bool aci_hw_rssi;
-
-	/* Radio switched on/off */
-	bool radio_on;
-	struct {
-		/* Values saved when turning the radio off.
-		 * They are needed when turning it on again. */
-		bool valid;
-		u16 rfover;
-		u16 rfoverval;
-	} radio_off_context;
-
-	u16 minlowsig[2];
-	u16 minlowsigpos[2];
-
-	/* LO Measurement Data.
-	 * Use b43legacy_get_lopair() to get a value.
-	 */
-	struct b43legacy_lopair *_lo_pairs;
-	/* TSSI to dBm table in use */
-	const s8 *tssi2dbm;
-	/* idle TSSI value */
-	s8 idle_tssi;
-	/* Target idle TSSI */
-	int tgt_idle_tssi;
-	/* Current idle TSSI */
-	int cur_idle_tssi;
-
-	/* LocalOscillator control values. */
-	struct b43legacy_txpower_lo_control *lo_control;
-	/* Values from b43legacy_calc_loopback_gain() */
-	s16 max_lb_gain;	/* Maximum Loopback gain in hdB */
-	s16 trsw_rx_gain;	/* TRSW RX gain in hdB */
-	s16 lna_lod_gain;	/* LNA lod */
-	s16 lna_gain;		/* LNA */
-	s16 pga_gain;		/* PGA */
-
-	/* Desired TX power level (in dBm). This is set by the user and
-	 * adjusted in b43legacy_phy_xmitpower(). */
-	u8 power_level;
-
-	/* Values from b43legacy_calc_loopback_gain() */
-	u16 loopback_gain[2];
-
-	/* TX Power control values. */
-	/* B/G PHY */
-	struct {
-		/* Current Radio Attenuation for TXpower recalculation. */
-		u16 rfatt;
-		/* Current Baseband Attenuation for TXpower recalculation. */
-		u16 bbatt;
-		/* Current TXpower control value for TXpower recalculation. */
-		u16 txctl1;
-		u16 txctl2;
-	};
-	/* A PHY */
-	struct {
-		u16 txpwr_offset;
-	};
-
-	/* Current Interference Mitigation mode */
-	int interfmode;
-	/* Stack of saved values from the Interference Mitigation code.
-	 * Each value in the stack is laid out as follows:
-	 * bit 0-11:  offset
-	 * bit 12-15: register ID
-	 * bit 16-32: value
-	 * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
-	 */
-#define B43legacy_INTERFSTACK_SIZE	26
-	u32 interfstack[B43legacy_INTERFSTACK_SIZE];
-
-	/* Saved values from the NRSSI Slope calculation */
-	s16 nrssi[2];
-	s32 nrssislope;
-	/* In memory nrssi lookup table. */
-	s8 nrssi_lt[64];
-
-	/* current channel */
-	u8 channel;
-
-	u16 lofcal;
-
-	u16 initval;
-
-	/* PHY TX errors counter. */
-	atomic_t txerr_cnt;
-
-#if B43legacy_DEBUG
-	/* Manual TX-power control enabled? */
-	bool manual_txpower_control;
-	/* PHY registers locked by b43legacy_phy_lock()? */
-	bool phy_locked;
-#endif /* B43legacy_DEBUG */
-};
-
-/* Data structures for DMA transmission, per 80211 core. */
-struct b43legacy_dma {
-	struct b43legacy_dmaring *tx_ring0;
-	struct b43legacy_dmaring *tx_ring1;
-	struct b43legacy_dmaring *tx_ring2;
-	struct b43legacy_dmaring *tx_ring3;
-	struct b43legacy_dmaring *tx_ring4;
-	struct b43legacy_dmaring *tx_ring5;
-
-	struct b43legacy_dmaring *rx_ring0;
-	struct b43legacy_dmaring *rx_ring3; /* only on core.rev < 5 */
-
-	u32 translation; /* Routing bits */
-};
-
-/* Data structures for PIO transmission, per 80211 core. */
-struct b43legacy_pio {
-	struct b43legacy_pioqueue *queue0;
-	struct b43legacy_pioqueue *queue1;
-	struct b43legacy_pioqueue *queue2;
-	struct b43legacy_pioqueue *queue3;
-};
-
-/* Context information for a noise calculation (Link Quality). */
-struct b43legacy_noise_calculation {
-	u8 channel_at_start;
-	bool calculation_running;
-	u8 nr_samples;
-	s8 samples[8][4];
-};
-
-struct b43legacy_stats {
-	u8 link_noise;
-	/* Store the last TX/RX times here for updating the leds. */
-	unsigned long last_tx;
-	unsigned long last_rx;
-};
-
-struct b43legacy_key {
-	void *keyconf;
-	bool enabled;
-	u8 algorithm;
-};
-
-#define B43legacy_QOS_QUEUE_NUM	4
-
-struct b43legacy_wldev;
-
-/* QOS parameters for a queue. */
-struct b43legacy_qos_params {
-	/* The QOS parameters */
-	struct ieee80211_tx_queue_params p;
-};
-
-/* Data structure for the WLAN parts (802.11 cores) of the b43legacy chip. */
-struct b43legacy_wl {
-	/* Pointer to the active wireless device on this chip */
-	struct b43legacy_wldev *current_dev;
-	/* Pointer to the ieee80211 hardware data structure */
-	struct ieee80211_hw *hw;
-
-	spinlock_t irq_lock;		/* locks IRQ */
-	struct mutex mutex;		/* locks wireless core state */
-	spinlock_t leds_lock;		/* lock for leds */
-
-	/* firmware loading work */
-	struct work_struct firmware_load;
-
-	/* We can only have one operating interface (802.11 core)
-	 * at a time. General information about this interface follows.
-	 */
-
-	struct ieee80211_vif *vif;
-	/* MAC address (can be NULL). */
-	u8 mac_addr[ETH_ALEN];
-	/* Current BSSID (can be NULL). */
-	u8 bssid[ETH_ALEN];
-	/* Interface type. (IEEE80211_IF_TYPE_XXX) */
-	int if_type;
-	/* Is the card operating in AP, STA or IBSS mode? */
-	bool operating;
-	/* filter flags */
-	unsigned int filter_flags;
-	/* Stats about the wireless interface */
-	struct ieee80211_low_level_stats ieee_stats;
-
-#ifdef CONFIG_B43LEGACY_HWRNG
-	struct hwrng rng;
-	u8 rng_initialized;
-	char rng_name[30 + 1];
-#endif
-
-	/* List of all wireless devices on this chip */
-	struct list_head devlist;
-	u8 nr_devs;
-
-	bool radiotap_enabled;
-	bool radio_enabled;
-
-	/* The beacon we are currently using (AP or IBSS mode).
-	 * This beacon stuff is protected by the irq_lock. */
-	struct sk_buff *current_beacon;
-	bool beacon0_uploaded;
-	bool beacon1_uploaded;
-	bool beacon_templates_virgin; /* Never wrote the templates? */
-	struct work_struct beacon_update_trigger;
-	/* The current QOS parameters for the 4 queues. */
-	struct b43legacy_qos_params qos_params[B43legacy_QOS_QUEUE_NUM];
-
-	/* Packet transmit work */
-	struct work_struct tx_work;
-
-	/* Queue of packets to be transmitted. */
-	struct sk_buff_head tx_queue[B43legacy_QOS_QUEUE_NUM];
-
-	/* Flag that implement the queues stopping. */
-	bool tx_queue_stopped[B43legacy_QOS_QUEUE_NUM];
-
-};
-
-/* Pointers to the firmware data and meta information about it. */
-struct b43legacy_firmware {
-	/* Microcode */
-	const struct firmware *ucode;
-	/* PCM code */
-	const struct firmware *pcm;
-	/* Initial MMIO values for the firmware */
-	const struct firmware *initvals;
-	/* Initial MMIO values for the firmware, band-specific */
-	const struct firmware *initvals_band;
-	/* Firmware revision */
-	u16 rev;
-	/* Firmware patchlevel */
-	u16 patch;
-};
-
-/* Device (802.11 core) initialization status. */
-enum {
-	B43legacy_STAT_UNINIT		= 0, /* Uninitialized. */
-	B43legacy_STAT_INITIALIZED	= 1, /* Initialized, not yet started. */
-	B43legacy_STAT_STARTED	= 2, /* Up and running. */
-};
-#define b43legacy_status(wldev)	atomic_read(&(wldev)->__init_status)
-#define b43legacy_set_status(wldev, stat)	do {		\
-		atomic_set(&(wldev)->__init_status, (stat));	\
-		smp_wmb();					\
-					} while (0)
-
-/* *** ---   HOW LOCKING WORKS IN B43legacy   --- ***
- *
- * You should always acquire both, wl->mutex and wl->irq_lock unless:
- * - You don't need to acquire wl->irq_lock, if the interface is stopped.
- * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
- *   and packet TX path (and _ONLY_ there.)
- */
-
-/* Data structure for one wireless device (802.11 core) */
-struct b43legacy_wldev {
-	struct ssb_device *dev;
-	struct b43legacy_wl *wl;
-
-	/* The device initialization status.
-	 * Use b43legacy_status() to query. */
-	atomic_t __init_status;
-	/* Saved init status for handling suspend. */
-	int suspend_init_status;
-
-	bool __using_pio;	/* Using pio rather than dma. */
-	bool bad_frames_preempt;/* Use "Bad Frames Preemption". */
-	bool dfq_valid;		/* Directed frame queue valid (IBSS PS mode, ATIM). */
-	bool short_preamble;	/* TRUE if using short preamble. */
-	bool radio_hw_enable;	/* State of radio hardware enable bit. */
-
-	/* PHY/Radio device. */
-	struct b43legacy_phy phy;
-	union {
-		/* DMA engines. */
-		struct b43legacy_dma dma;
-		/* PIO engines. */
-		struct b43legacy_pio pio;
-	};
-
-	/* Various statistics about the physical device. */
-	struct b43legacy_stats stats;
-
-	/* The device LEDs. */
-	struct b43legacy_led led_tx;
-	struct b43legacy_led led_rx;
-	struct b43legacy_led led_assoc;
-	struct b43legacy_led led_radio;
-
-	/* Reason code of the last interrupt. */
-	u32 irq_reason;
-	u32 dma_reason[6];
-	/* The currently active generic-interrupt mask. */
-	u32 irq_mask;
-	/* Link Quality calculation context. */
-	struct b43legacy_noise_calculation noisecalc;
-	/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
-	int mac_suspended;
-
-	/* Interrupt Service Routine tasklet (bottom-half) */
-	struct tasklet_struct isr_tasklet;
-
-	/* Periodic tasks */
-	struct delayed_work periodic_work;
-	unsigned int periodic_state;
-
-	struct work_struct restart_work;
-
-	/* encryption/decryption */
-	u16 ktp; /* Key table pointer */
-	u8 max_nr_keys;
-	struct b43legacy_key key[58];
-
-	/* Firmware data */
-	struct b43legacy_firmware fw;
-	const struct firmware *fwp;	/* needed to pass fw pointer */
-
-	/* completion struct for firmware loading */
-	struct completion fw_load_complete;
-
-	/* Devicelist in struct b43legacy_wl (all 802.11 cores) */
-	struct list_head list;
-
-	/* Debugging stuff follows. */
-#ifdef CONFIG_B43LEGACY_DEBUG
-	struct b43legacy_dfsentry *dfsentry;
-#endif
-};
-
-
-static inline
-struct b43legacy_wl *hw_to_b43legacy_wl(struct ieee80211_hw *hw)
-{
-	return hw->priv;
-}
-
-/* Helper function, which returns a boolean.
- * TRUE, if PIO is used; FALSE, if DMA is used.
- */
-#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
-static inline
-int b43legacy_using_pio(struct b43legacy_wldev *dev)
-{
-	return dev->__using_pio;
-}
-#elif defined(CONFIG_B43LEGACY_DMA)
-static inline
-int b43legacy_using_pio(struct b43legacy_wldev *dev)
-{
-	return 0;
-}
-#elif defined(CONFIG_B43LEGACY_PIO)
-static inline
-int b43legacy_using_pio(struct b43legacy_wldev *dev)
-{
-	return 1;
-}
-#else
-# error "Using neither DMA nor PIO? Confused..."
-#endif
-
-
-static inline
-struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev)
-{
-	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
-	return ssb_get_drvdata(ssb_dev);
-}
-
-/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
-static inline
-int b43legacy_is_mode(struct b43legacy_wl *wl, int type)
-{
-	return (wl->operating &&
-		wl->if_type == type);
-}
-
-static inline
-bool is_bcm_board_vendor(struct b43legacy_wldev *dev)
-{
-	return  (dev->dev->bus->boardinfo.vendor == PCI_VENDOR_ID_BROADCOM);
-}
-
-static inline
-u16 b43legacy_read16(struct b43legacy_wldev *dev, u16 offset)
-{
-	return ssb_read16(dev->dev, offset);
-}
-
-static inline
-void b43legacy_write16(struct b43legacy_wldev *dev, u16 offset, u16 value)
-{
-	ssb_write16(dev->dev, offset, value);
-}
-
-static inline
-u32 b43legacy_read32(struct b43legacy_wldev *dev, u16 offset)
-{
-	return ssb_read32(dev->dev, offset);
-}
-
-static inline
-void b43legacy_write32(struct b43legacy_wldev *dev, u16 offset, u32 value)
-{
-	ssb_write32(dev->dev, offset, value);
-}
-
-static inline
-struct b43legacy_lopair *b43legacy_get_lopair(struct b43legacy_phy *phy,
-					      u16 radio_attenuation,
-					      u16 baseband_attenuation)
-{
-	return phy->_lo_pairs + (radio_attenuation
-			+ 14 * (baseband_attenuation / 2));
-}
-
-
-
-/* Message printing */
-__printf(2, 3)
-void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...);
-__printf(2, 3)
-void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...);
-__printf(2, 3)
-void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...);
-#if B43legacy_DEBUG
-__printf(2, 3)
-void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...);
-#else /* DEBUG */
-# define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0)
-#endif /* DEBUG */
-
-/* Macros for printing a value in Q5.2 format */
-#define Q52_FMT		"%u.%u"
-#define Q52_ARG(q52)	((q52) / 4), (((q52) & 3) * 100 / 4)
-
-#endif /* B43legacy_H_ */