Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c

1 files changed, 15 insertions, 2 deletions

diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index e1c2fcaa8bed..abd083a357f5 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -42,6 +42,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/etherdevice.h>
+#include <linux/device.h>
 #include <net/mac80211.h>
 #include "ar9170.h"
 #include "cmd.h"
@@ -67,18 +68,28 @@ static struct usb_device_id ar9170_usb_ids[] = {
 	{ USB_DEVICE(0x0cf3, 0x1001) },
 	/* TP-Link TL-WN821N v2 */
 	{ USB_DEVICE(0x0cf3, 0x1002) },
+	/* 3Com Dual Band 802.11n USB Adapter */
+	{ USB_DEVICE(0x0cf3, 0x1010) },
+	/* H3C Dual Band 802.11n USB Adapter */
+	{ USB_DEVICE(0x0cf3, 0x1011) },
 	/* Cace Airpcap NX */
 	{ USB_DEVICE(0xcace, 0x0300) },
 	/* D-Link DWA 160 A1 */
 	{ USB_DEVICE(0x07d1, 0x3c10) },
 	/* D-Link DWA 160 A2 */
 	{ USB_DEVICE(0x07d1, 0x3a09) },
+	/* Netgear WNA1000 */
+	{ USB_DEVICE(0x0846, 0x9040) },
 	/* Netgear WNDA3100 */
 	{ USB_DEVICE(0x0846, 0x9010) },
 	/* Netgear WN111 v2 */
 	{ USB_DEVICE(0x0846, 0x9001) },
 	/* Zydas ZD1221 */
 	{ USB_DEVICE(0x0ace, 0x1221) },
+	/* Proxim ORiNOCO 802.11n USB */
+	{ USB_DEVICE(0x1435, 0x0804) },
+	/* WNC Generic 11n USB Dongle */
+	{ USB_DEVICE(0x1435, 0x0326) },
 	/* ZyXEL NWD271N */
 	{ USB_DEVICE(0x0586, 0x3417) },
 	/* Z-Com UB81 BG */
@@ -99,6 +110,8 @@ static struct usb_device_id ar9170_usb_ids[] = {
 	{ USB_DEVICE(0x0409, 0x0249) },
 	/* AVM FRITZ!WLAN USB Stick N 2.4 */
 	{ USB_DEVICE(0x057C, 0x8402), .driver_info = AR9170_REQ_FW1_ONLY },
+	/* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
+	{ USB_DEVICE(0x1668, 0x1200) },
 
 	/* terminate */
 	{}
@@ -731,10 +744,10 @@ static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
 
 	/* unbind anything failed */
 	if (parent)
-		down(&parent->sem);
+		device_lock(parent);
 	device_release_driver(&aru->udev->dev);
 	if (parent)
-		up(&parent->sem);
+		device_unlock(parent);
 
 	usb_put_dev(aru->udev);
 }