net/mlx4_core: Add basic support for QP max-rate limiting

Add the low-level device commands and definitions used for QP max-rate limiting.

This is done through the following elements:

  - read rate-limit device caps in QUERY_DEV_CAP: number of different
    rates and the min/max rates in Kbs/Mbs/Gbs units

  - enhance the QP context struct to contain rate limit units and value

  - allow to do run time rate-limit setting to QPs through the
    update-qp firmware command

  - QP rate-limiting is disallowed for VFs

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 32 insertions, 1 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 242bcee5d774..4a471f5d1b56 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -144,7 +144,8 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
 		[19] = "Performance optimized for limited rule configuration flow steering support",
 		[20] = "Recoverable error events support",
 		[21] = "Port Remap support",
-		[22] = "QCN support"
+		[22] = "QCN support",
+		[23] = "QP rate limiting support"
 	};
 	int i;
 
@@ -697,6 +698,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 #define QUERY_DEV_CAP_MAD_DEMUX_OFFSET		0xb0
 #define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_BASE_OFFSET	0xa8
 #define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET	0xac
+#define QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET	0xcc
+#define QUERY_DEV_CAP_QP_RATE_LIMIT_MAX_OFFSET	0xd0
+#define QUERY_DEV_CAP_QP_RATE_LIMIT_MIN_OFFSET	0xd2
+
 
 	dev_cap->flags2 = 0;
 	mailbox = mlx4_alloc_cmd_mailbox(dev);
@@ -904,6 +909,18 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 		 QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET);
 	dev_cap->dmfs_high_rate_qpn_range &= MGM_QPN_MASK;
 
+	MLX4_GET(size, outbox, QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET);
+	dev_cap->rl_caps.num_rates = size;
+	if (dev_cap->rl_caps.num_rates) {
+		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_QP_RATE_LIMIT;
+		MLX4_GET(size, outbox, QUERY_DEV_CAP_QP_RATE_LIMIT_MAX_OFFSET);
+		dev_cap->rl_caps.max_val  = size & 0xfff;
+		dev_cap->rl_caps.max_unit = size >> 14;
+		MLX4_GET(size, outbox, QUERY_DEV_CAP_QP_RATE_LIMIT_MIN_OFFSET);
+		dev_cap->rl_caps.min_val  = size & 0xfff;
+		dev_cap->rl_caps.min_unit = size >> 14;
+	}
+
 	MLX4_GET(field32, outbox, QUERY_DEV_CAP_EXT_2_FLAGS_OFFSET);
 	if (field32 & (1 << 16))
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_UPDATE_QP;
@@ -979,6 +996,15 @@ void mlx4_dev_cap_dump(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 		 dev_cap->dmfs_high_rate_qpn_base);
 	mlx4_dbg(dev, "DMFS high rate steer QPn range: %d\n",
 		 dev_cap->dmfs_high_rate_qpn_range);
+
+	if (dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_QP_RATE_LIMIT) {
+		struct mlx4_rate_limit_caps *rl_caps = &dev_cap->rl_caps;
+
+		mlx4_dbg(dev, "QP Rate-Limit: #rates %d, unit/val max %d/%d, min %d/%d\n",
+			 rl_caps->num_rates, rl_caps->max_unit, rl_caps->max_val,
+			 rl_caps->min_unit, rl_caps->min_val);
+	}
+
 	dump_dev_cap_flags(dev, dev_cap->flags);
 	dump_dev_cap_flags2(dev, dev_cap->flags2);
 }
@@ -1075,6 +1101,7 @@ int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave,
 	u64	flags;
 	int	err = 0;
 	u8	field;
+	u16	field16;
 	u32	bmme_flags, field32;
 	int	real_port;
 	int	slave_port;
@@ -1158,6 +1185,10 @@ int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave,
 	field &= 0xfe;
 	MLX4_PUT(outbox->buf, field, QUERY_DEV_CAP_ECN_QCN_VER_OFFSET);
 
+	/* turn off QP max-rate limiting for guests */
+	field16 = 0;
+	MLX4_PUT(outbox->buf, field16, QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET);
+
 	return 0;
 }