summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/sharpsl.c
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@cruncher.tec.linutronix.de>2006-05-23 23:25:53 +0200
committerThomas Gleixner <tglx@cruncher.tec.linutronix.de>2006-05-23 23:25:53 +0200
commit7abd3ef9875eb2afcdcd4f450680298a2983a55e (patch)
tree64c19d2e5ecca182938acfcb8a172efb7d907d85 /drivers/mtd/nand/sharpsl.c
parent3821720d51b5f304d2c33021a82c8da70f6d6ac9 (diff)
downloadtalos-op-linux-7abd3ef9875eb2afcdcd4f450680298a2983a55e.tar.gz
talos-op-linux-7abd3ef9875eb2afcdcd4f450680298a2983a55e.zip
[MTD] Refactor NAND hwcontrol to cmd_ctrl
The hwcontrol function enforced a step by step state machine for any kind of hardware chip access. Let the hardware driver know which control bits are set and inform it about a change of the control lines. Let the hardware driver write out the command and address bytes directly. This gives a peformance advantage for address bus controlled chips and simplifies the quirks in the hardware drivers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'drivers/mtd/nand/sharpsl.c')
-rw-r--r--drivers/mtd/nand/sharpsl.c41
1 files changed, 18 insertions, 23 deletions
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 5554d0b97c8c..45a1da724bff 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -77,31 +77,26 @@ static struct mtd_partition sharpsl_nand_default_partition_info[] = {
/*
* hardware specific access to control-lines
+ * ctrl:
+ * NAND_CNE: bit 0 -> bit 0 & 4
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 2
+ *
*/
-static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
- break;
- case NAND_CTL_CLRCLE:
- writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
- break;
-
- case NAND_CTL_SETALE:
- writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
- break;
- case NAND_CTL_CLRALE:
- writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
- break;
-
- case NAND_CTL_SETNCE:
- writeb(readb(FLASHCTL) & ~(FLCE0 | FLCE1), FLASHCTL);
- break;
- case NAND_CTL_CLRNCE:
- writeb(readb(FLASHCTL) | (FLCE0 | FLCE1), FLASHCTL);
- break;
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits = ctrl & 0x07;
+
+ bits |= (ctrl & 0x01) << 4;
+ writeb((readb(FLASHCTL) & 0x17) | bits, FLASHCTL);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
@@ -196,7 +191,7 @@ static int __init sharpsl_nand_init(void)
this->IO_ADDR_R = FLASHIO;
this->IO_ADDR_W = FLASHIO;
/* Set address of hardware control function */
- this->hwcontrol = sharpsl_nand_hwcontrol;
+ this->cmd_ctrl = sharpsl_nand_hwcontrol;
this->dev_ready = sharpsl_nand_dev_ready;
/* 15 us command delay time */
this->chip_delay = 15;
OpenPOWER on IntegriCloud