summaryrefslogtreecommitdiffstats
path: root/drivers/memstick
diff options
context:
space:
mode:
authorTakashi Iwai <tiwai@suse.de>2011-01-12 17:01:01 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2011-01-13 08:03:21 -0800
commit23c5947ac3f7a610bb4cb9e433802b36edc80fdf (patch)
tree6207b2375c61d2bd7e661cac5d1f0b60fb2b23e8 /drivers/memstick
parent0193383a5833c1f082c738eaca868e4093a8df39 (diff)
downloadtalos-op-linux-23c5947ac3f7a610bb4cb9e433802b36edc80fdf.tar.gz
talos-op-linux-23c5947ac3f7a610bb4cb9e433802b36edc80fdf.zip
memstick: fix setup for JMicron 38x controllers
This patch corrects the definition of clock values for JMicron 38x controllers and sets the value properly per interface type. Also, it adds a check for TPC errors in the interrupt handler. Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/memstick')
-rw-r--r--drivers/memstick/host/jmb38x_ms.c66
1 files changed, 36 insertions, 30 deletions
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index f2b894cd8b02..c90ba5082252 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -61,6 +61,7 @@ struct jmb38x_ms_host {
struct memstick_request *req;
unsigned char cmd_flags;
unsigned char io_pos;
+ unsigned char ifmode;
unsigned int io_word[2];
};
@@ -136,15 +137,14 @@ struct jmb38x_ms {
#define PAD_PU_PD_ON_MS_SOCK0 0x5f8f0000
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
+#define CLOCK_CONTROL_BY_MMIO 0x00000008
#define CLOCK_CONTROL_40MHZ 0x00000001
-#define CLOCK_CONTROL_50MHZ 0x0000000a
-#define CLOCK_CONTROL_60MHZ 0x00000008
-#define CLOCK_CONTROL_62_5MHZ 0x0000000c
+#define CLOCK_CONTROL_50MHZ 0x00000002
+#define CLOCK_CONTROL_60MHZ 0x00000010
+#define CLOCK_CONTROL_62_5MHZ 0x00000004
#define CLOCK_CONTROL_OFF 0x00000000
#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0
-#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
-#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
enum {
CMD_READY = 0x01,
@@ -390,8 +390,13 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
if (host->req->data_dir == READ)
cmd |= TPC_DIR;
- if (host->req->need_card_int)
- cmd |= TPC_WAIT_INT;
+
+ if (host->req->need_card_int) {
+ if (host->ifmode == MEMSTICK_SERIAL)
+ cmd |= TPC_GET_INT;
+ else
+ cmd |= TPC_WAIT_INT;
+ }
data = host->req->data;
@@ -529,7 +534,10 @@ static irqreturn_t jmb38x_ms_isr(int irq, void *dev_id)
if (irq_status & INT_STATUS_ANY_ERR) {
if (irq_status & INT_STATUS_CRC_ERR)
host->req->error = -EILSEQ;
- else
+ else if (irq_status & INT_STATUS_TPC_ERR) {
+ dev_dbg(&host->chip->pdev->dev, "TPC_ERR\n");
+ jmb38x_ms_complete_cmd(msh, 0);
+ } else
host->req->error = -ETIME;
} else {
if (host->cmd_flags & DMA_DATA) {
@@ -644,7 +652,6 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
- /* return -EIO; */
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
@@ -675,7 +682,7 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
{
struct jmb38x_ms_host *host = memstick_priv(msh);
unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
- unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
+ unsigned int clock_ctl = CLOCK_CONTROL_BY_MMIO, clock_delay = 0;
int rc = 0;
switch (param) {
@@ -687,9 +694,7 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN
- | HOST_CONTROL_HW_OC_P
- | HOST_CONTROL_TDELAY_EN;
+ | HOST_CONTROL_CLOCK_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
@@ -712,41 +717,42 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
return -EINVAL;
break;
case MEMSTICK_INTERFACE:
+ dev_dbg(&host->chip->pdev->dev,
+ "Set Host Interface Mode to %d\n", value);
+ host_ctl &= ~(HOST_CONTROL_FAST_CLK | HOST_CONTROL_REI |
+ HOST_CONTROL_REO);
+ host_ctl |= HOST_CONTROL_TDELAY_EN | HOST_CONTROL_HW_OC_P;
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
- pci_read_config_dword(host->chip->pdev,
- PCI_CTL_CLOCK_DLY_ADDR,
- &clock_delay);
- clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
- : ~PCI_CTL_CLOCK_DLY_MASK_A;
if (value == MEMSTICK_SERIAL) {
- host_ctl &= ~HOST_CONTROL_FAST_CLK;
- host_ctl &= ~HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
- clock_ctl = CLOCK_CONTROL_40MHZ;
+ clock_ctl |= CLOCK_CONTROL_40MHZ;
+ clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
- host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
+ host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
- host_ctl &= ~HOST_CONTROL_REI;
- clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay |= host->id ? (4 << 12) : (4 << 8);
+ host_ctl |= HOST_CONTROL_REO;
+ clock_ctl |= CLOCK_CONTROL_40MHZ;
+ clock_delay = 4;
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
- host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
- clock_ctl = CLOCK_CONTROL_50MHZ;
+ clock_ctl |= CLOCK_CONTROL_50MHZ;
+ clock_delay = 0;
} else
return -EINVAL;
writel(host_ctl, host->addr + HOST_CONTROL);
+ writel(CLOCK_CONTROL_OFF, host->addr + CLOCK_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
- pci_write_config_dword(host->chip->pdev,
- PCI_CTL_CLOCK_DLY_ADDR,
- clock_delay);
+ pci_write_config_byte(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR + 1,
+ clock_delay);
+ host->ifmode = value;
break;
};
return 0;
OpenPOWER on IntegriCloud