Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The first part of the media updates for Kernel 3.7.

  This series contain:

   - A major tree renaming patch series: now, drivers are organized
     internally by their used bus, instead of by V4L2 and/or DVB API,
     providing a cleaner driver location for hybrid drivers that
     implement both APIs, and allowing to cleanup the Kconfig items and
     make them more intuitive for the end user;

   - Media Kernel developers are typically very lazy with their duties
     of keeping the MAINTAINERS entries for their drivers updated.  As
     now the tree is more organized, we're doing an effort to add/update
     those entries for the drivers that aren't currently orphan;

   - Several DVB USB drivers got moved to a new DVB USB v2 core; the new
     core fixes several bugs (as the existing one that got bitroted).
     Now, suspend/resume finally started to work fine (at least with
     some devices - we should expect more work with regards to it);

   - added multistream support for DVB-T2, and unified the API for
     DVB-S2 and ISDB-S.  Backward binary support is preserved;

   - as usual, a few new drivers, some V4L2 core improvements and lots
     of drivers improvements and fixes.

  There are some points to notice on this series:

   1) you should expect a trivial merge conflict on your tree, with the
      removal of Documentation/feature-removal-schedule.txt: this series
      would be adding two additional entries there.  I opted to not
      rebase it due to this recent change;

   2) With regards to the PCTV 520e udev-related breakage, I opted to
      fix it in a way that the patches can be backported to 3.5 even
      without your firmware fix patch.  This way, Greg doesn't need to
      rush backporting your patch (as there are still the firmware cache
      and firmware path customization issues to be addressed there).

      I'll send later a patch (likely after the end of the merge window)
      reverting the rest of the DRX-K async firmware request, fully
      restoring its original behaviour to allow media drivers to
      initialize everything serialized as before for 3.7 and upper.

   3) I'm planning to work on this weekend to test the DMABUF patches
      for V4L2.  The patches are on my queue for several Kernel cycles,
      but, up to now, there is/was no way to test the series locally.

      I have some concerns about this particular changeset with regards
      to security issues, and with regards to the replacement of the old
      VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to
      GPU drivers change.  The Overlay API allows direct PCI2PCI
      transfers from a media capture card into the GPU framebuffer, but
      its API is crappy.  Also, the only existing X11 driver that
      implements it requires a XV extension that is not available
      anymore on modern drivers.  The DMABUF can do the same thing, but
      with it is promising to be a properly-designed API.  If I can
      successfully test this series and be happy with it, I should be
      asking you to pull them next week."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits)
  em28xx: regression fix: use DRX-K sync firmware requests on em28xx
  drxk: allow loading firmware synchrousnously
  em28xx: Make all em28xx extensions to be initialized asynchronously
  [media] tda18271: properly report read errors in tda18271_get_id
  [media] tda18271: delay IR & RF calibration until init() if delay_cal is set
  [media] MAINTAINERS: add Michael Krufky as tda827x maintainer
  [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer
  [media] MAINTAINERS: add Michael Krufky as cxusb maintainer
  [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer
  [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer
  [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer
  [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap
  [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend()
  [media] exynos-gsc: Add missing static storage class specifiers
  [media] exynos-gsc: Remove <linux/version.h> header file inclusion
  [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs()
  [media] s5p-tv: Fix potential NULL pointer dereference error
  [media] s5k6aa: Fix possible NULL pointer dereference
  ...

1 files changed, 347 insertions, 0 deletions

diff --git a/drivers/media/pci/cx18/cx18-gpio.c b/drivers/media/pci/cx18/cx18-gpio.c
new file mode 100644
index 000000000000..5374aeb0cd22
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-gpio.c
@@ -0,0 +1,347 @@
+/*
+ *  cx18 gpio functions
+ *
+ *  Derived from ivtv-gpio.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ *  02111-1307  USA
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include "cx18-cards.h"
+#include "cx18-gpio.h"
+#include "tuner-xc2028.h"
+
+/********************* GPIO stuffs *********************/
+
+/* GPIO registers */
+#define CX18_REG_GPIO_IN     0xc72010
+#define CX18_REG_GPIO_OUT1   0xc78100
+#define CX18_REG_GPIO_DIR1   0xc78108
+#define CX18_REG_GPIO_OUT2   0xc78104
+#define CX18_REG_GPIO_DIR2   0xc7810c
+
+/*
+ * HVR-1600 GPIO pins, courtesy of Hauppauge:
+ *
+ * gpio0: zilog ir process reset pin
+ * gpio1: zilog programming pin (you should never use this)
+ * gpio12: cx24227 reset pin
+ * gpio13: cs5345 reset pin
+*/
+
+/*
+ * File scope utility functions
+ */
+static void gpio_write(struct cx18 *cx)
+{
+	u32 dir_lo = cx->gpio_dir & 0xffff;
+	u32 val_lo = cx->gpio_val & 0xffff;
+	u32 dir_hi = cx->gpio_dir >> 16;
+	u32 val_hi = cx->gpio_val >> 16;
+
+	cx18_write_reg_expect(cx, dir_lo << 16,
+					CX18_REG_GPIO_DIR1, ~dir_lo, dir_lo);
+	cx18_write_reg_expect(cx, (dir_lo << 16) | val_lo,
+					CX18_REG_GPIO_OUT1, val_lo, dir_lo);
+	cx18_write_reg_expect(cx, dir_hi << 16,
+					CX18_REG_GPIO_DIR2, ~dir_hi, dir_hi);
+	cx18_write_reg_expect(cx, (dir_hi << 16) | val_hi,
+					CX18_REG_GPIO_OUT2, val_hi, dir_hi);
+}
+
+static void gpio_update(struct cx18 *cx, u32 mask, u32 data)
+{
+	if (mask == 0)
+		return;
+
+	mutex_lock(&cx->gpio_lock);
+	cx->gpio_val = (cx->gpio_val & ~mask) | (data & mask);
+	gpio_write(cx);
+	mutex_unlock(&cx->gpio_lock);
+}
+
+static void gpio_reset_seq(struct cx18 *cx, u32 active_lo, u32 active_hi,
+			   unsigned int assert_msecs,
+			   unsigned int recovery_msecs)
+{
+	u32 mask;
+
+	mask = active_lo | active_hi;
+	if (mask == 0)
+		return;
+
+	/*
+	 * Assuming that active_hi and active_lo are a subsets of the bits in
+	 * gpio_dir.  Also assumes that active_lo and active_hi don't overlap
+	 * in any bit position
+	 */
+
+	/* Assert */
+	gpio_update(cx, mask, ~active_lo);
+	schedule_timeout_uninterruptible(msecs_to_jiffies(assert_msecs));
+
+	/* Deassert */
+	gpio_update(cx, mask, ~active_hi);
+	schedule_timeout_uninterruptible(msecs_to_jiffies(recovery_msecs));
+}
+
+/*
+ * GPIO Multiplexer - logical device
+ */
+static int gpiomux_log_status(struct v4l2_subdev *sd)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	mutex_lock(&cx->gpio_lock);
+	CX18_INFO_DEV(sd, "GPIO:  direction 0x%08x, value 0x%08x\n",
+		      cx->gpio_dir, cx->gpio_val);
+	mutex_unlock(&cx->gpio_lock);
+	return 0;
+}
+
+static int gpiomux_s_radio(struct v4l2_subdev *sd)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	/*
+	 * FIXME - work out the cx->active/audio_input mess - this is
+	 * intended to handle the switch to radio mode and set the
+	 * audio routing, but we need to update the state in cx
+	 */
+	gpio_update(cx, cx->card->gpio_audio_input.mask,
+			cx->card->gpio_audio_input.radio);
+	return 0;
+}
+
+static int gpiomux_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	u32 data;
+
+	switch (cx->card->audio_inputs[cx->audio_input].muxer_input) {
+	case 1:
+		data = cx->card->gpio_audio_input.linein;
+		break;
+	case 0:
+		data = cx->card->gpio_audio_input.tuner;
+		break;
+	default:
+		/*
+		 * FIXME - work out the cx->active/audio_input mess - this is
+		 * intended to handle the switch from radio mode and set the
+		 * audio routing, but we need to update the state in cx
+		 */
+		data = cx->card->gpio_audio_input.tuner;
+		break;
+	}
+	gpio_update(cx, cx->card->gpio_audio_input.mask, data);
+	return 0;
+}
+
+static int gpiomux_s_audio_routing(struct v4l2_subdev *sd,
+				   u32 input, u32 output, u32 config)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	u32 data;
+
+	switch (input) {
+	case 0:
+		data = cx->card->gpio_audio_input.tuner;
+		break;
+	case 1:
+		data = cx->card->gpio_audio_input.linein;
+		break;
+	case 2:
+		data = cx->card->gpio_audio_input.radio;
+		break;
+	default:
+		return -EINVAL;
+	}
+	gpio_update(cx, cx->card->gpio_audio_input.mask, data);
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops gpiomux_core_ops = {
+	.log_status = gpiomux_log_status,
+	.s_std = gpiomux_s_std,
+};
+
+static const struct v4l2_subdev_tuner_ops gpiomux_tuner_ops = {
+	.s_radio = gpiomux_s_radio,
+};
+
+static const struct v4l2_subdev_audio_ops gpiomux_audio_ops = {
+	.s_routing = gpiomux_s_audio_routing,
+};
+
+static const struct v4l2_subdev_ops gpiomux_ops = {
+	.core = &gpiomux_core_ops,
+	.tuner = &gpiomux_tuner_ops,
+	.audio = &gpiomux_audio_ops,
+};
+
+/*
+ * GPIO Reset Controller - logical device
+ */
+static int resetctrl_log_status(struct v4l2_subdev *sd)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	mutex_lock(&cx->gpio_lock);
+	CX18_INFO_DEV(sd, "GPIO:  direction 0x%08x, value 0x%08x\n",
+		      cx->gpio_dir, cx->gpio_val);
+	mutex_unlock(&cx->gpio_lock);
+	return 0;
+}
+
+static int resetctrl_reset(struct v4l2_subdev *sd, u32 val)
+{
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+	const struct cx18_gpio_i2c_slave_reset *p;
+
+	p = &cx->card->gpio_i2c_slave_reset;
+	switch (val) {
+	case CX18_GPIO_RESET_I2C:
+		gpio_reset_seq(cx, p->active_lo_mask, p->active_hi_mask,
+			       p->msecs_asserted, p->msecs_recovery);
+		break;
+	case CX18_GPIO_RESET_Z8F0811:
+		/*
+		 * Assert timing for the Z8F0811 on HVR-1600 boards:
+		 * 1. Assert RESET for min of 4 clock cycles at 18.432 MHz to
+		 *    initiate
+		 * 2. Reset then takes 66 WDT cycles at 10 kHz + 16 xtal clock
+		 *    cycles (6,601,085 nanoseconds ~= 7 milliseconds)
+		 * 3. DBG pin must be high before chip exits reset for normal
+		 *    operation.  DBG is open drain and hopefully pulled high
+		 *    since we don't normally drive it (GPIO 1?) for the
+		 *    HVR-1600
+		 * 4. Z8F0811 won't exit reset until RESET is deasserted
+		 * 5. Zilog comes out of reset, loads reset vector address and
+		 *    executes from there. Required recovery delay unknown.
+		 */
+		gpio_reset_seq(cx, p->ir_reset_mask, 0,
+			       p->msecs_asserted, p->msecs_recovery);
+		break;
+	case CX18_GPIO_RESET_XC2028:
+		if (cx->card->tuners[0].tuner == TUNER_XC2028)
+			gpio_reset_seq(cx, (1 << cx->card->xceive_pin), 0,
+				       1, 1);
+		break;
+	}
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops resetctrl_core_ops = {
+	.log_status = resetctrl_log_status,
+	.reset = resetctrl_reset,
+};
+
+static const struct v4l2_subdev_ops resetctrl_ops = {
+	.core = &resetctrl_core_ops,
+};
+
+/*
+ * External entry points
+ */
+void cx18_gpio_init(struct cx18 *cx)
+{
+	mutex_lock(&cx->gpio_lock);
+	cx->gpio_dir = cx->card->gpio_init.direction;
+	cx->gpio_val = cx->card->gpio_init.initial_value;
+
+	if (cx->card->tuners[0].tuner == TUNER_XC2028) {
+		cx->gpio_dir |= 1 << cx->card->xceive_pin;
+		cx->gpio_val |= 1 << cx->card->xceive_pin;
+	}
+
+	if (cx->gpio_dir == 0) {
+		mutex_unlock(&cx->gpio_lock);
+		return;
+	}
+
+	CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n",
+			cx18_read_reg(cx, CX18_REG_GPIO_DIR1),
+			cx18_read_reg(cx, CX18_REG_GPIO_DIR2),
+			cx18_read_reg(cx, CX18_REG_GPIO_OUT1),
+			cx18_read_reg(cx, CX18_REG_GPIO_OUT2));
+
+	gpio_write(cx);
+	mutex_unlock(&cx->gpio_lock);
+}
+
+int cx18_gpio_register(struct cx18 *cx, u32 hw)
+{
+	struct v4l2_subdev *sd;
+	const struct v4l2_subdev_ops *ops;
+	char *str;
+
+	switch (hw) {
+	case CX18_HW_GPIO_MUX:
+		sd = &cx->sd_gpiomux;
+		ops = &gpiomux_ops;
+		str = "gpio-mux";
+		break;
+	case CX18_HW_GPIO_RESET_CTRL:
+		sd = &cx->sd_resetctrl;
+		ops = &resetctrl_ops;
+		str = "gpio-reset-ctrl";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	v4l2_subdev_init(sd, ops);
+	v4l2_set_subdevdata(sd, cx);
+	snprintf(sd->name, sizeof(sd->name), "%s %s", cx->v4l2_dev.name, str);
+	sd->grp_id = hw;
+	return v4l2_device_register_subdev(&cx->v4l2_dev, sd);
+}
+
+void cx18_reset_ir_gpio(void *data)
+{
+	struct cx18 *cx = to_cx18((struct v4l2_device *)data);
+
+	if (cx->card->gpio_i2c_slave_reset.ir_reset_mask == 0)
+		return;
+
+	CX18_DEBUG_INFO("Resetting IR microcontroller\n");
+
+	v4l2_subdev_call(&cx->sd_resetctrl,
+			 core, reset, CX18_GPIO_RESET_Z8F0811);
+}
+EXPORT_SYMBOL(cx18_reset_ir_gpio);
+/* This symbol is exported for use by lirc_pvr150 for the IR-blaster */
+
+/* Xceive tuner reset function */
+int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value)
+{
+	struct i2c_algo_bit_data *algo = dev;
+	struct cx18_i2c_algo_callback_data *cb_data = algo->data;
+	struct cx18 *cx = cb_data->cx;
+
+	if (cmd != XC2028_TUNER_RESET ||
+	    cx->card->tuners[0].tuner != TUNER_XC2028)
+		return 0;
+
+	CX18_DEBUG_INFO("Resetting XCeive tuner\n");
+	return v4l2_subdev_call(&cx->sd_resetctrl,
+				core, reset, CX18_GPIO_RESET_XC2028);
+}