summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@infradead.org>2006-04-13 11:29:13 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2006-05-12 19:55:04 -0300
commitcaf970e09c42843eb3b8456fc0e815f9b5385873 (patch)
tree91b15ba87bb1f1ee84e2568d1034b48125bbf043 /drivers/media/dvb
parenta74b51fca9d9b6774413d700ade1e9ae1f0c0e75 (diff)
downloadtalos-op-linux-caf970e09c42843eb3b8456fc0e815f9b5385873.tar.gz
talos-op-linux-caf970e09c42843eb3b8456fc0e815f9b5385873.zip
V4L/DVB (3796): Add several debug messages to cx24123 code
Current debug messages at cx24123 are next to useless, since they don't print the values sent/read to registers. With this patch, debug=1 will show comprehensive messages. debug=2 will show also read/write operations at I2C bus. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Diffstat (limited to 'drivers/media/dvb')
-rw-r--r--drivers/media/dvb/frontends/cx24123.c54
1 files changed, 51 insertions, 3 deletions
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index e430e6a50831..115ec169b641 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -225,6 +225,10 @@ static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
int err;
+ if (debug>1)
+ printk("cx24123: %s: write reg 0x%02x, value 0x%02x\n",
+ __FUNCTION__,reg, data);
+
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk("%s: writereg error(err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -241,6 +245,10 @@ static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data)
struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
int err;
+ if (debug>1)
+ printk("cx24123: %s: writeln addr=0x08, reg 0x%02x, value 0x%02x\n",
+ __FUNCTION__,reg, data);
+
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -270,6 +278,9 @@ static int cx24123_readreg(struct cx24123_state* state, u8 reg)
return ret;
}
+ if (debug>1)
+ printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret);
+
return b1[0];
}
@@ -282,14 +293,17 @@ static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_invers
{
switch (inversion) {
case INVERSION_OFF:
+ dprintk("%s: inversion off\n",__FUNCTION__);
cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
break;
case INVERSION_ON:
+ dprintk("%s: inversion on\n",__FUNCTION__);
cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
break;
case INVERSION_AUTO:
+ dprintk("%s: inversion auto\n",__FUNCTION__);
cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
break;
default:
@@ -305,10 +319,13 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers
val = cx24123_readreg(state, 0x1b) >> 7;
- if (val == 0)
+ if (val == 0) {
+ dprintk("%s: read inversion off\n",__FUNCTION__);
*inversion = INVERSION_OFF;
- else
+ } else {
+ dprintk("%s: read inversion on\n",__FUNCTION__);
*inversion = INVERSION_ON;
+ }
return 0;
}
@@ -321,18 +338,25 @@ static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
/* Hardware has 5/11 and 3/5 but are never unused */
switch (fec) {
case FEC_NONE:
+ dprintk("%s: set FEC to none\n",__FUNCTION__);
return cx24123_writereg(state, 0x0f, 0x01);
case FEC_1_2:
+ dprintk("%s: set FEC to 1/2\n",__FUNCTION__);
return cx24123_writereg(state, 0x0f, 0x02);
case FEC_2_3:
+ dprintk("%s: set FEC to 2/3\n",__FUNCTION__);
return cx24123_writereg(state, 0x0f, 0x04);
case FEC_3_4:
+ dprintk("%s: set FEC to 3/4\n",__FUNCTION__);
return cx24123_writereg(state, 0x0f, 0x08);
case FEC_5_6:
+ dprintk("%s: set FEC to 4/5\n",__FUNCTION__);
return cx24123_writereg(state, 0x0f, 0x20);
case FEC_7_8:
+ dprintk("%s: set FEC to 5/6\n",__FUNCTION__);
return cx24123_writereg(state, 0x0f, 0x80);
case FEC_AUTO:
+ dprintk("%s: set FEC to auto\n",__FUNCTION__);
return cx24123_writereg(state, 0x0f, 0xae);
default:
return -EOPNOTSUPP;
@@ -510,6 +534,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par
struct cx24123_state *state = fe->demodulator_priv;
unsigned long timeout;
+ dprintk("%s: pll writereg called, data=0x%08x\n",__FUNCTION__,data);
+
/* align the 21 bytes into to bit23 boundary */
data = data << 3;
@@ -581,6 +607,9 @@ static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_paramet
cx24123_writereg(state, 0x27, state->FILTune >> 2);
cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
+ dprintk("%s: pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg,
+ state->bandselectarg,state->pllarg);
+
return 0;
}
@@ -589,6 +618,8 @@ static int cx24123_initfe(struct dvb_frontend* fe)
struct cx24123_state *state = fe->demodulator_priv;
int i;
+ dprintk("%s: init frontend\n",__FUNCTION__);
+
/* Configure the demod to a good set of defaults */
for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
@@ -616,10 +647,13 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage
switch (voltage) {
case SEC_VOLTAGE_13:
+ dprintk("%s: isl6421 voltage = 13V\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
case SEC_VOLTAGE_18:
+ dprintk("%s: isl6421 voltage = 18V\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
case SEC_VOLTAGE_OFF:
+ dprintk("%s: isl5421 voltage off\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x30);
default:
return -EINVAL;
@@ -780,6 +814,8 @@ static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber)
else
state->snr = 0;
+ dprintk("%s: BER = %d, S/N index = %d\n",__FUNCTION__,state->lastber, state->snr);
+
*ber = state->lastber;
return 0;
@@ -790,6 +826,8 @@ static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_str
struct cx24123_state *state = fe->demodulator_priv;
*signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
+ dprintk("%s: Signal strength = %d\n",__FUNCTION__,*signal_strength);
+
return 0;
}
@@ -798,6 +836,8 @@ static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr)
struct cx24123_state *state = fe->demodulator_priv;
*snr = state->snr;
+ dprintk("%s: read S/N index = %d\n",__FUNCTION__,*snr);
+
return 0;
}
@@ -806,6 +846,8 @@ static int cx24123_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
struct cx24123_state *state = fe->demodulator_priv;
*ucblocks = state->lastber;
+ dprintk("%s: ucblocks (ber) = %d\n",__FUNCTION__,*ucblocks);
+
return 0;
}
@@ -813,6 +855,8 @@ static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
{
struct cx24123_state *state = fe->demodulator_priv;
+ dprintk("%s: set_frontend\n",__FUNCTION__);
+
if (state->config->set_ts_params)
state->config->set_ts_params(fe, 0);
@@ -836,6 +880,8 @@ static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
{
struct cx24123_state *state = fe->demodulator_priv;
+ dprintk("%s: get_frontend\n",__FUNCTION__);
+
if (cx24123_get_inversion(state, &p->inversion) != 0) {
printk("%s: Failed to get inversion status\n",__FUNCTION__);
return -EREMOTEIO;
@@ -862,8 +908,10 @@ static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
switch (tone) {
case SEC_TONE_ON:
+ dprintk("%s: isl6421 sec tone on\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val | 0x10);
case SEC_TONE_OFF:
+ dprintk("%s: isl6421 sec tone off\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x2f);
default:
printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
@@ -980,7 +1028,7 @@ static struct dvb_frontend_ops cx24123_ops = {
};
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
MODULE_AUTHOR("Steven Toth");
OpenPOWER on IntegriCloud