V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards

With (some) Technisat cards you cannot run multiple DVB applications
in parallel and switch the channel at the same time.

There seems to be a problem on the interfaces or even inside the flexcop-device
that can't handle interruption on the streaming interface.

This patch adds a watchdog to check whether data is supposed to come in
(streaming PIDs are requested) and if no data is seen within 400ms (default) it
resets the streaming/pid-filtering hardware.

This patch is urgently needed to support the rev 2.8 of the hardware and solves
problem occassionally seen on older hardware.

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 44 insertions, 25 deletions

diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
index b386cc66c6b3..451974ba32f3 100644
--- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c
+++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
@@ -192,6 +192,7 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d
 
 	return 0;
 }
+EXPORT_SYMBOL(flexcop_pid_feed_control);
 
 void flexcop_hw_filter_init(struct flexcop_device *fc)
 {
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 5b30dfc7846b..76e37fd96bb6 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -13,9 +13,9 @@ static int enable_pid_filtering = 1;
 module_param(enable_pid_filtering, int, 0444);
 MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
 
-static int irq_chk_intv;
+static int irq_chk_intv = 100;
 module_param(irq_chk_intv, int, 0644);
-MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
 
 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
 #define dprintk(level,args...) \
@@ -34,7 +34,9 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently jus
 
 static int debug;
 module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug,
+	"set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
+	 DEBSTATUS);
 
 #define DRIVER_VERSION "0.1"
 #define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
@@ -58,6 +60,8 @@ struct flexcop_pci {
 	int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
 	u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
 	int count;
+	int count_prev;
+	int stream_problem;
 
 	spinlock_t irq_lock;
 
@@ -103,18 +107,32 @@ static void flexcop_pci_irq_check_work(struct work_struct *work)
 		container_of(work, struct flexcop_pci, irq_check_work.work);
 	struct flexcop_device *fc = fc_pci->fc_dev;
 
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
-
-	flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
-
-	if (v.sram_dest_reg_714.net_ovflow_error)
-		deb_chk("sram net_ovflow_error\n");
-	if (v.sram_dest_reg_714.media_ovflow_error)
-		deb_chk("sram media_ovflow_error\n");
-	if (v.sram_dest_reg_714.cai_ovflow_error)
-		deb_chk("sram cai_ovflow_error\n");
-	if (v.sram_dest_reg_714.cai_ovflow_error)
-		deb_chk("sram cai_ovflow_error\n");
+	if (fc->feedcount) {
+
+		if (fc_pci->count == fc_pci->count_prev) {
+			deb_chk("no IRQ since the last check\n");
+			if (fc_pci->stream_problem++ == 3) {
+				struct dvb_demux_feed *feed;
+
+				spin_lock_irq(&fc->demux.lock);
+				list_for_each_entry(feed, &fc->demux.feed_list,
+					list_head) {
+					flexcop_pid_feed_control(fc, feed, 0);
+				}
+
+				list_for_each_entry(feed, &fc->demux.feed_list,
+					list_head) {
+					flexcop_pid_feed_control(fc, feed, 1);
+				}
+				spin_unlock_irq(&fc->demux.lock);
+
+				fc_pci->stream_problem = 0;
+			}
+		} else {
+			fc_pci->stream_problem = 0;
+			fc_pci->count_prev = fc_pci->count;
+		}
+	}
 
 	schedule_delayed_work(&fc_pci->irq_check_work,
 			msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
@@ -216,16 +234,12 @@ static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
 		flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
 		deb_irq("IRQ enabled\n");
 
+		fc_pci->count_prev = fc_pci->count;
+
 //		fc_pci->active_dma1_addr = 0;
 //		flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
 
-		if (irq_chk_intv > 0)
-			schedule_delayed_work(&fc_pci->irq_check_work,
-					msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
 	} else {
-		if (irq_chk_intv > 0)
-			cancel_delayed_work(&fc_pci->irq_check_work);
-
 		flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
 		deb_irq("IRQ disabled\n");
 
@@ -299,8 +313,6 @@ static int flexcop_pci_init(struct flexcop_pci *fc_pci)
 					IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
 		goto err_pci_iounmap;
 
-
-
 	fc_pci->init_state |= FC_PCI_INIT;
 	return ret;
 
@@ -375,6 +387,10 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
 
+		if (irq_chk_intv > 0)
+			schedule_delayed_work(&fc_pci->irq_check_work,
+		msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+
 	return ret;
 
 err_fc_exit:
@@ -393,6 +409,9 @@ static void flexcop_pci_remove(struct pci_dev *pdev)
 {
 	struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
 
+	if (irq_chk_intv > 0)
+		cancel_delayed_work(&fc_pci->irq_check_work);
+
 	flexcop_pci_dma_exit(fc_pci);
 	flexcop_device_exit(fc_pci->fc_dev);
 	flexcop_pci_exit(fc_pci);
diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c
index 676413a915b4..91068952b502 100644
--- a/drivers/media/dvb/b2c2/flexcop.c
+++ b/drivers/media/dvb/b2c2/flexcop.c
@@ -212,8 +212,7 @@ void flexcop_reset_block_300(struct flexcop_device *fc)
 	v210.sw_reset_210.Block_reset_enable = 0xb2;
 
 	fc->write_ibi_reg(fc,sw_reset_210,v210);
-	msleep(1);
-
+	udelay(1000);
 	fc->write_ibi_reg(fc,ctrl_208,v208_save);
 }