summaryrefslogtreecommitdiffstats
path: root/drivers/md/raid5.c
diff options
context:
space:
mode:
authorNeilBrown <neilb@suse.de>2011-07-27 11:00:36 +1000
committerNeilBrown <neilb@suse.de>2011-07-27 11:00:36 +1000
commit84789554e96c0263ad8aa9be91397ece1f88c768 (patch)
tree678ee7d5ba7a1473d4fd532a80e878b228c2066b /drivers/md/raid5.c
parentc8ac1803ff0af5aa614587ac0c66d46b7a3bdfcc (diff)
downloadtalos-op-linux-84789554e96c0263ad8aa9be91397ece1f88c768.tar.gz
talos-op-linux-84789554e96c0263ad8aa9be91397ece1f88c768.zip
md/raid5: move more common code into handle_stripe
Apart from 'prexor' which can only be set for RAID5, and 'qd_idx' which can only be meaningful for RAID6, these two chunks of code are nearly the same. So combine them into one adding a test to call either handle_parity_checks5 or handle_parity_checks6 as appropriate. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Diffstat (limited to 'drivers/md/raid5.c')
-rw-r--r--drivers/md/raid5.c161
1 files changed, 61 insertions, 100 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index a3018970d6a3..cf60b15b4e3a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1756,7 +1756,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
/*
* Select the parity disk based on the user selected algorithm.
*/
- pd_idx = qd_idx = ~0;
+ pd_idx = qd_idx = -1;
switch(conf->level) {
case 4:
pd_idx = data_disks;
@@ -2903,7 +2903,6 @@ static int handle_stripe5(struct stripe_head *sh, struct stripe_head_state *s)
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks, i;
struct r5dev *dev;
- int prexor;
/* Now to look around and see what can be done */
rcu_read_lock();
@@ -3026,56 +3025,6 @@ static int handle_stripe5(struct stripe_head *sh, struct stripe_head_state *s)
(s->syncing && (s->uptodate + s->compute < disks)) || s->expanding)
handle_stripe_fill(sh, s, disks);
- /* Now we check to see if any write operations have recently
- * completed
- */
- prexor = 0;
- if (sh->reconstruct_state == reconstruct_state_prexor_drain_result)
- prexor = 1;
- if (sh->reconstruct_state == reconstruct_state_drain_result ||
- sh->reconstruct_state == reconstruct_state_prexor_drain_result) {
- sh->reconstruct_state = reconstruct_state_idle;
-
- /* All the 'written' buffers and the parity block are ready to
- * be written back to disk
- */
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
- for (i = disks; i--; ) {
- dev = &sh->dev[i];
- if (test_bit(R5_LOCKED, &dev->flags) &&
- (i == sh->pd_idx || dev->written)) {
- pr_debug("Writing block %d\n", i);
- set_bit(R5_Wantwrite, &dev->flags);
- if (prexor)
- continue;
- if (!test_bit(R5_Insync, &dev->flags) ||
- (i == sh->pd_idx && s->failed == 0))
- set_bit(STRIPE_INSYNC, &sh->state);
- }
- }
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- s->dec_preread_active = 1;
- }
-
- /* Now to consider new write requests and what else, if anything
- * should be read. We do not handle new writes when:
- * 1/ A 'write' operation (copy+xor) is already in flight.
- * 2/ A 'check' operation is in flight, as it may clobber the parity
- * block.
- */
- if (s->to_write && !sh->reconstruct_state && !sh->check_state)
- handle_stripe_dirtying(conf, sh, s, disks);
-
- /* maybe we need to check and possibly fix the parity for this stripe
- * Any reads will already have been scheduled, so we just see if enough
- * data is available. The parity check is held off while parity
- * dependent operations are in flight.
- */
- if (sh->check_state ||
- (s->syncing && s->locked == 0 &&
- !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
- !test_bit(STRIPE_INSYNC, &sh->state)))
- handle_parity_checks5(conf, sh, s, disks);
return 0;
}
@@ -3217,54 +3166,6 @@ static int handle_stripe6(struct stripe_head *sh, struct stripe_head_state *s)
(s->syncing && (s->uptodate + s->compute < disks)) || s->expanding)
handle_stripe_fill(sh, s, disks);
- /* Now we check to see if any write operations have recently
- * completed
- */
- if (sh->reconstruct_state == reconstruct_state_drain_result) {
-
- sh->reconstruct_state = reconstruct_state_idle;
- /* All the 'written' buffers and the parity blocks are ready to
- * be written back to disk
- */
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[qd_idx].flags));
- for (i = disks; i--; ) {
- dev = &sh->dev[i];
- if (test_bit(R5_LOCKED, &dev->flags) &&
- (i == sh->pd_idx || i == qd_idx ||
- dev->written)) {
- pr_debug("Writing block %d\n", i);
- BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
- set_bit(R5_Wantwrite, &dev->flags);
- if (!test_bit(R5_Insync, &dev->flags) ||
- ((i == sh->pd_idx || i == qd_idx) &&
- s->failed == 0))
- set_bit(STRIPE_INSYNC, &sh->state);
- }
- }
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- s->dec_preread_active = 1;
- }
-
- /* Now to consider new write requests and what else, if anything
- * should be read. We do not handle new writes when:
- * 1/ A 'write' operation (copy+gen_syndrome) is already in flight.
- * 2/ A 'check' operation is in flight, as it may clobber the parity
- * block.
- */
- if (s->to_write && !sh->reconstruct_state && !sh->check_state)
- handle_stripe_dirtying(conf, sh, s, disks);
-
- /* maybe we need to check and possibly fix the parity for this stripe
- * Any reads will already have been scheduled, so we just see if enough
- * data is available. The parity check is held off while parity
- * dependent operations are in flight.
- */
- if (sh->check_state ||
- (s->syncing && s->locked == 0 &&
- !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
- !test_bit(STRIPE_INSYNC, &sh->state)))
- handle_parity_checks6(conf, sh, s, disks);
return 0;
}
@@ -3273,6 +3174,8 @@ static void handle_stripe(struct stripe_head *sh)
struct stripe_head_state s;
int done;
int i;
+ int prexor;
+ int disks = sh->disks;
raid5_conf_t *conf = sh->raid_conf;
clear_bit(STRIPE_HANDLE, &sh->state);
@@ -3310,6 +3213,64 @@ static void handle_stripe(struct stripe_head *sh)
if (done)
goto finish;
+ /* Now we check to see if any write operations have recently
+ * completed
+ */
+ prexor = 0;
+ if (sh->reconstruct_state == reconstruct_state_prexor_drain_result)
+ prexor = 1;
+ if (sh->reconstruct_state == reconstruct_state_drain_result ||
+ sh->reconstruct_state == reconstruct_state_prexor_drain_result) {
+ sh->reconstruct_state = reconstruct_state_idle;
+
+ /* All the 'written' buffers and the parity block are ready to
+ * be written back to disk
+ */
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
+ BUG_ON(sh->qd_idx >= 0 &&
+ !test_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags));
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (test_bit(R5_LOCKED, &dev->flags) &&
+ (i == sh->pd_idx || i == sh->qd_idx ||
+ dev->written)) {
+ pr_debug("Writing block %d\n", i);
+ set_bit(R5_Wantwrite, &dev->flags);
+ if (prexor)
+ continue;
+ if (!test_bit(R5_Insync, &dev->flags) ||
+ ((i == sh->pd_idx || i == sh->qd_idx) &&
+ s.failed == 0))
+ set_bit(STRIPE_INSYNC, &sh->state);
+ }
+ }
+ if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+ s.dec_preread_active = 1;
+ }
+
+ /* Now to consider new write requests and what else, if anything
+ * should be read. We do not handle new writes when:
+ * 1/ A 'write' operation (copy+xor) is already in flight.
+ * 2/ A 'check' operation is in flight, as it may clobber the parity
+ * block.
+ */
+ if (s.to_write && !sh->reconstruct_state && !sh->check_state)
+ handle_stripe_dirtying(conf, sh, &s, disks);
+
+ /* maybe we need to check and possibly fix the parity for this stripe
+ * Any reads will already have been scheduled, so we just see if enough
+ * data is available. The parity check is held off while parity
+ * dependent operations are in flight.
+ */
+ if (sh->check_state ||
+ (s.syncing && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
+ !test_bit(STRIPE_INSYNC, &sh->state))) {
+ if (conf->level == 6)
+ handle_parity_checks6(conf, sh, &s, disks);
+ else
+ handle_parity_checks5(conf, sh, &s, disks);
+ }
if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
OpenPOWER on IntegriCloud