Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits)
  ide: add support for SCSI ioctls to ide-floppy
  ide: remove stale changelog from setup-pci.c
  ide: remove stale changelog/comments/TODO from ide.c
  ide-cris: handle PIO auto-tuning in tune_cris_ide()
  ide: add PIO masks
  ide: remove ide_find_best_pio_mode()
  ide: drop "PIO data" argument from ide_get_best_pio_mode()
  ide: ide_find_best_pio_mode() fixes (take 2)
  ide: add ide_pio_cycle_time() helper (take 2)
  sc1200: remove stale Power Management code
  ide: ide_start_power_step() fix WRT disabling DMA
  serverworks: fix DMA
  serverworks: always tune PIO
  ide: add ide_pci_device_t.host_flags (take 2)
  ide: add ide_dev_has_iordy() helper (take 4)
  ide: make ide_get_best_pio_mode() print info if overriding PIO mode
  siimage: PIO mode setup fixes (take 2)
  atiixp: PIO mode setup fixes
  ide: Stop mapping ROMs
  IDE: Remove references to dead ETRAX-related variables.
  ...

1 files changed, 14 insertions, 22 deletions

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index e9b07a97c340..2cd74c345a6c 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -652,7 +652,7 @@ static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
 
 static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
 {
-	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	pio = ide_get_best_pio_mode(drive, pio, 4);
 	(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
 }
 
@@ -994,14 +994,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 	 */
 	*info = *(struct hpt_info *)pci_get_drvdata(dev);
 
-	/*
-	 * FIXME: Not portable. Also, why do we enable the ROM in the first place?
-	 * We don't seem to be using it.
-	 */
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-			dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
 	pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
@@ -1491,7 +1483,7 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
 		 * to both functions -- really stupid design decision... :-(
 		 * Bit 4 is for the primary channel, bit 5 for the secondary.
 		 */
-		d->channels = 1;
+		d->host_flags |= IDE_HFLAG_SINGLE;
 		d->enablebits[0].mask = d->enablebits[0].val = 0x10;
 
 		d->udma_mask = HPT366_ALLOW_ATA66_3 ?
@@ -1554,71 +1546,71 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
-		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.bootable	= OFF_BOARD,
-		.extra		= 240
+		.extra		= 240,
+		.pio_mask	= ATA_PIO4,
 	},{	/* 1 */
 		.name		= "HPT372A",
 		.init_setup	= init_setup_hpt372a,
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
-		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.udma_mask	= HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
-		.extra		= 240
+		.extra		= 240,
+		.pio_mask	= ATA_PIO4,
 	},{	/* 2 */
 		.name		= "HPT302",
 		.init_setup	= init_setup_hpt302,
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
-		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.udma_mask	= HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
-		.extra		= 240
+		.extra		= 240,
+		.pio_mask	= ATA_PIO4,
 	},{	/* 3 */
 		.name		= "HPT371",
 		.init_setup	= init_setup_hpt371,
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
-		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.udma_mask	= HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
-		.extra		= 240
+		.extra		= 240,
+		.pio_mask	= ATA_PIO4,
 	},{	/* 4 */
 		.name		= "HPT374",
 		.init_setup	= init_setup_hpt374,
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
-		.channels	= 2,	/* 4 */
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.udma_mask	= 0x3f,
 		.bootable	= OFF_BOARD,
-		.extra		= 240
+		.extra		= 240,
+		.pio_mask	= ATA_PIO4,
 	},{	/* 5 */
 		.name		= "HPT372N",
 		.init_setup	= init_setup_hpt372n,
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
-		.channels	= 2,	/* 4 */
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.udma_mask	= HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
-		.extra		= 240
+		.extra		= 240,
+		.pio_mask	= ATA_PIO4,
 	}
 };