summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorJens Axboe <jaxboe@fusionio.com>2011-05-20 20:33:15 +0200
committerJens Axboe <jaxboe@fusionio.com>2011-05-20 20:33:15 +0200
commit698567f3fa790fea37509a54dea855302dd88331 (patch)
tree7a1df976a0eb12cab03e82c18809a30d5482fee4 /drivers/hwmon
parentd70d0711edd8076ec2ce0ed109106e2df950681b (diff)
parent61c4f2c81c61f73549928dfd9f3e8f26aa36a8cf (diff)
downloadtalos-op-linux-698567f3fa790fea37509a54dea855302dd88331.tar.gz
talos-op-linux-698567f3fa790fea37509a54dea855302dd88331.zip
Merge commit 'v2.6.39' into for-2.6.40/core
Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've had churn in the core area that makes it difficult to handle patches for eg cfq or blk-throttle. Instead of requiring that they be based in older versions with bugs that have been fixed later in the rc cycle, merge in 2.6.39 final. Also fixes up conflicts in the below files. Conflicts: drivers/block/paride/pcd.c drivers/cdrom/viocd.c drivers/ide/ide-cd.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig11
-rw-r--r--drivers/hwmon/lm85.c6
-rw-r--r--drivers/hwmon/lm90.c22
-rw-r--r--drivers/hwmon/pmbus_core.c1
-rw-r--r--drivers/hwmon/twl4030-madc-hwmon.c3
5 files changed, 25 insertions, 18 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 060ef6327876..50e40dbd8bb6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -110,8 +110,7 @@ config SENSORS_ADM1021
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
- Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
- and the XEON processor built-in sensor.
+ Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
This driver can also be built as a module. If so, the module
will be called adm1021.
@@ -618,10 +617,10 @@ config SENSORS_LM90
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
- MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
- MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
- W83L771W/G/AWG/ASG sensor chips.
+ LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
+ Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+ MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
+ and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 250d099ca398..da72dc12068c 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1094,6 +1094,7 @@ static struct attribute *lm85_attributes_minctl[] = {
&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
+ NULL
};
static const struct attribute_group lm85_group_minctl = {
@@ -1104,6 +1105,7 @@ static struct attribute *lm85_attributes_temp_off[] = {
&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
&sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
+ NULL
};
static const struct attribute_group lm85_group_temp_off = {
@@ -1329,11 +1331,11 @@ static int lm85_probe(struct i2c_client *client,
if (data->type != emc6d103s) {
err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl);
if (err)
- goto err_kfree;
+ goto err_remove_files;
err = sysfs_create_group(&client->dev.kobj,
&lm85_group_temp_off);
if (err)
- goto err_kfree;
+ goto err_remove_files;
}
/* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index c43b4e9f96a9..2f94f9504804 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -49,10 +49,10 @@
* chips, but support three temperature sensors instead of two. MAX6695
* and MAX6696 only differ in the pinout so they can be treated identically.
*
- * This driver also supports the ADT7461 chip from Analog Devices.
- * It's supported in both compatibility and extended mode. It is mostly
- * compatible with LM90 except for a data format difference for the
- * temperature value registers.
+ * This driver also supports ADT7461 and ADT7461A from Analog Devices as well as
+ * NCT1008 from ON Semiconductor. The chips are supported in both compatibility
+ * and extended mode. They are mostly compatible with LM90 except for a data
+ * format difference for the temperature value registers.
*
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
@@ -88,9 +88,10 @@
* Addresses to scan
* Address is fully defined internally and cannot be changed except for
* MAX6659, MAX6680 and MAX6681.
- * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657,
- * MAX6658 and W83L771 have address 0x4c.
- * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d.
+ * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, ADT7461A, MAX6649,
+ * MAX6657, MAX6658, NCT1008 and W83L771 have address 0x4c.
+ * ADM1032-2, ADT7461-2, ADT7461A-2, LM89-1, LM99-1, MAX6646, and NCT1008D
+ * have address 0x4d.
* MAX6647 has address 0x4e.
* MAX6659 can have address 0x4c, 0x4d or 0x4e.
* MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
@@ -174,6 +175,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
static const struct i2c_device_id lm90_id[] = {
{ "adm1032", adm1032 },
{ "adt7461", adt7461 },
+ { "adt7461a", adt7461 },
{ "lm90", lm90 },
{ "lm86", lm86 },
{ "lm89", lm86 },
@@ -188,6 +190,7 @@ static const struct i2c_device_id lm90_id[] = {
{ "max6681", max6680 },
{ "max6695", max6696 },
{ "max6696", max6696 },
+ { "nct1008", adt7461 },
{ "w83l771", w83l771 },
{ }
};
@@ -1153,6 +1156,11 @@ static int lm90_detect(struct i2c_client *new_client,
&& (reg_config1 & 0x1B) == 0x00
&& reg_convrate <= 0x0A) {
name = "adt7461";
+ } else
+ if (chip_id == 0x57 /* ADT7461A, NCT1008 */
+ && (reg_config1 & 0x1B) == 0x00
+ && reg_convrate <= 0x0A) {
+ name = "adt7461a";
}
} else
if (man_id == 0x4D) { /* Maxim */
diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c
index edfb92e41735..196ffafafd88 100644
--- a/drivers/hwmon/pmbus_core.c
+++ b/drivers/hwmon/pmbus_core.c
@@ -139,7 +139,6 @@ struct pmbus_data {
* A single status register covers multiple attributes,
* so we keep them all together.
*/
- u8 status_bits;
u8 status[PB_NUM_STATUS_REG];
u8 currpage;
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index de5819199e2e..57240740b161 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -98,7 +98,6 @@ static const struct attribute_group twl4030_madc_group = {
static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev)
{
int ret;
- int status;
struct device *hwmon;
ret = sysfs_create_group(&pdev->dev.kobj, &twl4030_madc_group);
@@ -107,7 +106,7 @@ static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev)
hwmon = hwmon_device_register(&pdev->dev);
if (IS_ERR(hwmon)) {
dev_err(&pdev->dev, "hwmon_device_register failed.\n");
- status = PTR_ERR(hwmon);
+ ret = PTR_ERR(hwmon);
goto err_reg;
}
OpenPOWER on IntegriCloud