Merge tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel into drm-next

- final bits (again) for the rotation support (Sonika Jindal)
- support bl_power in the intel backlight (Jani)
- vdd handling improvements from Ville
- i830M fixes from Ville
- piles of prep work all over to make skl enabling just plug in (Damien, Sonika)
- rename DP training defines to reflect latest edp standards, this touches all
  drm drivers supporting DP (Sonika Jindal)
- cache edids during single detect cycle to avoid re-reading it for e.g. audio,
  from Chris
- move w/a for registers which are stored in the hw context to the context init
  code (Arun&Damien)
- edp panel power sequencer fixes, helps chv a lot (Ville)
- piles of other chv fixes all over
- much more paranoid pageflip handling with stall detection and better recovery
  from Chris
- small things all over, as usual

* tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits)
  drm/i915: Update DRIVER_DATE to 20140905
  drm/i915: Decouple the stuck pageflip on modeset
  drm/i915: Check for a stalled page flip after each vblank
  drm/i915: Introduce a for_each_plane() macro
  drm/i915: Rewrite ABS_DIFF() in a safer manner
  drm/i915: Add comments explaining the vdd on/off functions
  drm/i915: Move DP port disable to post_disable for pch platforms
  drm/i915: Enable DP port earlier
  drm/i915: Turn on panel power before doing aux transfers
  drm/i915: Be more careful when picking the initial power sequencer pipe
  drm/i915: Reset power sequencer pipe tracking when disp2d is off
  drm/i915: Track which port is using which pipe's power sequencer
  drm/i915: Fix edp vdd locking
  drm/i915: Reset the HEAD pointer for the ring after writing START
  drm/i915: Fix unsafe vma iteration in i915_drop_caches
  drm/i915: init sprites with univeral plane init function
  drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs
  drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code
  drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code
  drm/i915: Don't call gen8_fbc_sw_flush() on chv
  ...

1 files changed, 160 insertions, 1 deletions

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 3c7283d8f160..109de2eeb9a8 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -444,7 +444,14 @@ gen8_render_ring_flush(struct intel_engine_cs *ring,
 			return ret;
 	}
 
-	return gen8_emit_pipe_control(ring, flags, scratch_addr);
+	ret = gen8_emit_pipe_control(ring, flags, scratch_addr);
+	if (ret)
+		return ret;
+
+	if (!invalidate_domains && flush_domains)
+		return gen7_ring_fbc_flush(ring, FBC_REND_NUKE);
+
+	return 0;
 }
 
 static void ring_write_tail(struct intel_engine_cs *ring,
@@ -556,6 +563,14 @@ static int init_ring_common(struct intel_engine_cs *ring)
 	 * also enforces ordering), otherwise the hw might lose the new ring
 	 * register values. */
 	I915_WRITE_START(ring, i915_gem_obj_ggtt_offset(obj));
+
+	/* WaClearRingBufHeadRegAtInit:ctg,elk */
+	if (I915_READ_HEAD(ring))
+		DRM_DEBUG("%s initialization failed [head=%08x], fudging\n",
+			  ring->name, I915_READ_HEAD(ring));
+	I915_WRITE_HEAD(ring, 0);
+	(void)I915_READ_HEAD(ring);
+
 	I915_WRITE_CTL(ring,
 			((ringbuf->size - PAGE_SIZE) & RING_NR_PAGES)
 			| RING_VALID);
@@ -650,6 +665,146 @@ err:
 	return ret;
 }
 
+static inline void intel_ring_emit_wa(struct intel_engine_cs *ring,
+				       u32 addr, u32 value)
+{
+	struct drm_device *dev = ring->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (WARN_ON(dev_priv->num_wa_regs >= I915_MAX_WA_REGS))
+		return;
+
+	intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
+	intel_ring_emit(ring, addr);
+	intel_ring_emit(ring, value);
+
+	dev_priv->intel_wa_regs[dev_priv->num_wa_regs].addr = addr;
+	dev_priv->intel_wa_regs[dev_priv->num_wa_regs].mask = value & 0xFFFF;
+	/* value is updated with the status of remaining bits of this
+	 * register when it is read from debugfs file
+	 */
+	dev_priv->intel_wa_regs[dev_priv->num_wa_regs].value = value;
+	dev_priv->num_wa_regs++;
+
+	return;
+}
+
+static int bdw_init_workarounds(struct intel_engine_cs *ring)
+{
+	int ret;
+	struct drm_device *dev = ring->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/*
+	 * workarounds applied in this fn are part of register state context,
+	 * they need to be re-initialized followed by gpu reset, suspend/resume,
+	 * module reload.
+	 */
+	dev_priv->num_wa_regs = 0;
+	memset(dev_priv->intel_wa_regs, 0, sizeof(dev_priv->intel_wa_regs));
+
+	/*
+	 * update the number of dwords required based on the
+	 * actual number of workarounds applied
+	 */
+	ret = intel_ring_begin(ring, 24);
+	if (ret)
+		return ret;
+
+	/* WaDisablePartialInstShootdown:bdw */
+	/* WaDisableThreadStallDopClockGating:bdw */
+	/* FIXME: Unclear whether we really need this on production bdw. */
+	intel_ring_emit_wa(ring, GEN8_ROW_CHICKEN,
+			   _MASKED_BIT_ENABLE(PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE
+					     | STALL_DOP_GATING_DISABLE));
+
+	/* WaDisableDopClockGating:bdw May not be needed for production */
+	intel_ring_emit_wa(ring, GEN7_ROW_CHICKEN2,
+			   _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
+
+	/*
+	 * This GEN8_CENTROID_PIXEL_OPT_DIS W/A is only needed for
+	 * pre-production hardware
+	 */
+	intel_ring_emit_wa(ring, HALF_SLICE_CHICKEN3,
+			   _MASKED_BIT_ENABLE(GEN8_CENTROID_PIXEL_OPT_DIS
+					      | GEN8_SAMPLER_POWER_BYPASS_DIS));
+
+	intel_ring_emit_wa(ring, GEN7_HALF_SLICE_CHICKEN1,
+			   _MASKED_BIT_ENABLE(GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE));
+
+	intel_ring_emit_wa(ring, COMMON_SLICE_CHICKEN2,
+			   _MASKED_BIT_ENABLE(GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE));
+
+	/* Use Force Non-Coherent whenever executing a 3D context. This is a
+	 * workaround for for a possible hang in the unlikely event a TLB
+	 * invalidation occurs during a PSD flush.
+	 */
+	intel_ring_emit_wa(ring, HDC_CHICKEN0,
+			   _MASKED_BIT_ENABLE(HDC_FORCE_NON_COHERENT));
+
+	/* Wa4x4STCOptimizationDisable:bdw */
+	intel_ring_emit_wa(ring, CACHE_MODE_1,
+			   _MASKED_BIT_ENABLE(GEN8_4x4_STC_OPTIMIZATION_DISABLE));
+
+	/*
+	 * BSpec recommends 8x4 when MSAA is used,
+	 * however in practice 16x4 seems fastest.
+	 *
+	 * Note that PS/WM thread counts depend on the WIZ hashing
+	 * disable bit, which we don't touch here, but it's good
+	 * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
+	 */
+	intel_ring_emit_wa(ring, GEN7_GT_MODE,
+			   GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4);
+
+	intel_ring_advance(ring);
+
+	DRM_DEBUG_DRIVER("Number of Workarounds applied: %d\n",
+			 dev_priv->num_wa_regs);
+
+	return 0;
+}
+
+static int chv_init_workarounds(struct intel_engine_cs *ring)
+{
+	int ret;
+	struct drm_device *dev = ring->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/*
+	 * workarounds applied in this fn are part of register state context,
+	 * they need to be re-initialized followed by gpu reset, suspend/resume,
+	 * module reload.
+	 */
+	dev_priv->num_wa_regs = 0;
+	memset(dev_priv->intel_wa_regs, 0, sizeof(dev_priv->intel_wa_regs));
+
+	ret = intel_ring_begin(ring, 12);
+	if (ret)
+		return ret;
+
+	/* WaDisablePartialInstShootdown:chv */
+	intel_ring_emit_wa(ring, GEN8_ROW_CHICKEN,
+			   _MASKED_BIT_ENABLE(PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE));
+
+	/* WaDisableThreadStallDopClockGating:chv */
+	intel_ring_emit_wa(ring, GEN8_ROW_CHICKEN,
+			   _MASKED_BIT_ENABLE(STALL_DOP_GATING_DISABLE));
+
+	/* WaDisableDopClockGating:chv (pre-production hw) */
+	intel_ring_emit_wa(ring, GEN7_ROW_CHICKEN2,
+			   _MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
+
+	/* WaDisableSamplerPowerBypass:chv (pre-production hw) */
+	intel_ring_emit_wa(ring, HALF_SLICE_CHICKEN3,
+			   _MASKED_BIT_ENABLE(GEN8_SAMPLER_POWER_BYPASS_DIS));
+
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
 static int init_render_ring(struct intel_engine_cs *ring)
 {
 	struct drm_device *dev = ring->dev;
@@ -2148,6 +2303,10 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 					dev_priv->semaphore_obj = obj;
 			}
 		}
+		if (IS_CHERRYVIEW(dev))
+			ring->init_context = chv_init_workarounds;
+		else
+			ring->init_context = bdw_init_workarounds;
 		ring->add_request = gen6_add_request;
 		ring->flush = gen8_render_ring_flush;
 		ring->irq_get = gen8_ring_get_irq;