drm/i915/skl: Deinit/init the display at suspend/resume

We need to re-init the display hardware when going out of suspend. This
includes:

  - Hooking the PCH to the reset logic
  - Restoring CDCDLK
  - Enabling the DDB power

Among those, only the CDCDLK one is a bit tricky. There's some
complexity in that:

  - DPLL0 (which is the source for CDCLK) has two VCOs, each with a set
    of supported frequencies. As eDP also uses DPLL0 for its link rate,
    once DPLL0 is on, we restrict the possible eDP link rates the chosen
    VCO.
  - CDCLK also limits the bandwidth available to push pixels.

So, as a first step, this commit restore what the BIOS set, until I can
do more testing.

In case that's of interest for the reviewer, I've unit tested the
function that derives the decimal frequency field:

  #include <stdio.h>
  #include <stdint.h>
  #include <assert.h>

  #define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))

  static const struct dpll_freq {
          unsigned int freq;
          unsigned int decimal;
  } freqs[] = {
          { .freq = 308570, .decimal = 0b01001100111},
          { .freq = 337500, .decimal = 0b01010100001},
          { .freq = 432000, .decimal = 0b01101011110},
          { .freq = 450000, .decimal = 0b01110000010},
          { .freq = 540000, .decimal = 0b10000110110},
          { .freq = 617140, .decimal = 0b10011010000},
          { .freq = 675000, .decimal = 0b10101000100},
  };

  static void intbits(unsigned int v)
  {
          int i;

          for(i = 10; i >= 0; i--)
                  putchar('0' + ((v >> i) & 1));
  }

  static unsigned int freq_decimal(unsigned int freq /* in kHz */)
  {
          return (freq - 1000) / 500;
  }

  static void test_freq(const struct dpll_freq *entry)
  {
          unsigned int decimal = freq_decimal(entry->freq);

          printf("freq: %d, expected: ", entry->freq);
          intbits(entry->decimal);
          printf(", got: ");
          intbits(decimal);
          putchar('\n');

          assert(decimal == entry->decimal);
  }

  int main(int argc, char **argv)
  {
          int i;

          for (i = 0; i < ARRAY_SIZE(freqs); i++)
                  test_freq(&freqs[i]);

          return 0;
  }

v2:
  - Rebase on top of -nightly
  - Use (freq - 1000) / 500 for the decimal frequency (Ville)
  - Fix setting the enable bit of HSW_NDE_RSTWRN_OPT (Ville)
  - Rename skl_display_{resume,suspend} to skl_{init,uninit}_cdclk to
    be consistent with the BXT code (Ville)
  - Store boot CDCLK in ddi_pll_init (Ville)
  - Merge dev_priv's skl_boot_cdclk into cdclk_freq
  - Use LCPLL_PLL_LOCK instead of (1 << 30) (Ville)
  - Replace various '0' by SKL_DPLL0 to be a bit more explicit that
    we're programming DPLL0
  - Busy poll the PCU before doing the frequency change. It takes about
    3/4 cycles, each separated by 10us, to get the ACK from the CPU
    (Ville)

v3:
  - Restore dev_priv->skl_boot_cdclk, leaving unification with
    dev_priv->cdclk_freq for a later patch (Daniel, Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 2 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index e94cb6e16456..02d83178bd03 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1118,6 +1118,8 @@ void broxton_ddi_phy_init(struct drm_device *dev);
 void broxton_ddi_phy_uninit(struct drm_device *dev);
 void bxt_enable_dc9(struct drm_i915_private *dev_priv);
 void bxt_disable_dc9(struct drm_i915_private *dev_priv);
+void skl_init_cdclk(struct drm_i915_private *dev_priv);
+void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
 void intel_dp_get_m_n(struct intel_crtc *crtc,
 		      struct intel_crtc_state *pipe_config);
 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);