pcmcia: introduce autoconfiguration feature

Introduce an autoconfiguration feature to set certain values in
pcmcia_loop_config(), instead of copying the same code over and over
in each PCMCIA driver. At first, introduce the following options:

CONF_AUTO_CHECK_VCC	check or matching Vcc entry
CONF_AUTO_SET_VPP	set Vpp
CONF_AUTO_AUDIO		enable the speaker line

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 3 insertions, 20 deletions

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 76da55d27e08..954f43c512f1 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -169,34 +169,16 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
 
 struct pcmcia_config_check {
 	unsigned long ctl_base;
-	int skip_vcc;
 	int is_kme;
 };
 
 static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 				   cistpl_cftable_entry_t *cfg,
 				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
 				   void *priv_data)
 {
 	struct pcmcia_config_check *stk = priv_data;
 
-	/* Check for matching Vcc, unless we're desperate */
-	if (!stk->skip_vcc) {
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		}
-	}
-
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
@@ -249,6 +231,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	pdev->config_flags |= CONF_ENABLE_IRQ;
+	pdev->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
 
 	/* See if we have a manufacturer identifier. Use it to set is_kme for
 	   vendor quirks */
@@ -262,10 +245,10 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	if (!stk)
 		goto out1;
 	stk->is_kme = is_kme;
-	stk->skip_vcc = io_base = ctl_base = 0;
+	io_base = ctl_base = 0;
 
 	if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
-		stk->skip_vcc = 1;
+		pdev->config_flags &= ~CONF_AUTO_CHECK_VCC;
 		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
 			goto failed; /* No suitable config found */
 	}