omap: McBSP: Use cache when modifying individual register bits

Change the way McBSP registers are updated: use cached values instead of
relying upon those read back from the device.

With this patch, I have finally managed to get rid of all random
playback/recording hangups on my OMAP1510 based Amstrad Delta hardware. Before
that, values read back from McBSP registers to be used for updating them
happened to be errornous.

From the hardware side, the issue appeared to be caused by a relatively high
power requirements of an external USB adapter connected to the board's printer
dedicated USB port.

I think there is one important point that makes this patch worth of applying,
apart from my hardware quality. With the current code, if it ever happens to
any machine, no matter if OMAP1510 or newer, to read incorrect value from a
McBSP register, this wrong value will get written back without any checking.
That can lead to hardware damage if, for example, an input pin is turned into
output as a result.

Applies on top of patch 3 from this series:
[PATCH v9 3/4] OMAP: McBSP: Introduce caching in register write operations

Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit
fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11).
Compile-tested with omap_3430sdp_defconfig.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 47 insertions, 31 deletions

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 61e440a0f7cd..473be3dc2cf5 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -114,7 +114,8 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
 			irqst_spcr2);
 		/* Writing zero to XSYNC_ERR clears the IRQ */
-		MCBSP_WRITE(mcbsp_tx, SPCR2, irqst_spcr2 & ~(XSYNC_ERR));
+		MCBSP_WRITE(mcbsp_tx, SPCR2,
+			    MCBSP_READ_CACHE(mcbsp_tx, SPCR2) & ~(XSYNC_ERR));
 	} else {
 		complete(&mcbsp_tx->tx_irq_completion);
 	}
@@ -134,7 +135,8 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
 			irqst_spcr1);
 		/* Writing zero to RSYNC_ERR clears the IRQ */
-		MCBSP_WRITE(mcbsp_rx, SPCR1, irqst_spcr1 & ~(RSYNC_ERR));
+		MCBSP_WRITE(mcbsp_rx, SPCR1,
+			    MCBSP_READ_CACHE(mcbsp_rx, SPCR1) & ~(RSYNC_ERR));
 	} else {
 		complete(&mcbsp_rx->tx_irq_completion);
 	}
@@ -544,24 +546,25 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	mcbsp->rx_word_length = (MCBSP_READ(mcbsp, RCR1) >> 5) & 0x7;
-	mcbsp->tx_word_length = (MCBSP_READ(mcbsp, XCR1) >> 5) & 0x7;
+	mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
+	mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
 
-	idle = !((MCBSP_READ(mcbsp, SPCR2) | MCBSP_READ(mcbsp, SPCR1)) & 1);
+	idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+			MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
 
 	if (idle) {
 		/* Start the sample generator */
-		w = MCBSP_READ(mcbsp, SPCR2);
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
 		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
 	}
 
 	/* Enable transmitter and receiver */
 	tx &= 1;
-	w = MCBSP_READ(mcbsp, SPCR2);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR2);
 	MCBSP_WRITE(mcbsp, SPCR2, w | tx);
 
 	rx &= 1;
-	w = MCBSP_READ(mcbsp, SPCR1);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR1);
 	MCBSP_WRITE(mcbsp, SPCR1, w | rx);
 
 	/*
@@ -574,16 +577,16 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 
 	if (idle) {
 		/* Start frame sync */
-		w = MCBSP_READ(mcbsp, SPCR2);
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
 		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
 	}
 
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 		/* Release the transmitter and receiver */
-		w = MCBSP_READ(mcbsp, XCCR);
+		w = MCBSP_READ_CACHE(mcbsp, XCCR);
 		w &= ~(tx ? XDISABLE : 0);
 		MCBSP_WRITE(mcbsp, XCCR, w);
-		w = MCBSP_READ(mcbsp, RCCR);
+		w = MCBSP_READ_CACHE(mcbsp, RCCR);
 		w &= ~(rx ? RDISABLE : 0);
 		MCBSP_WRITE(mcbsp, RCCR, w);
 	}
@@ -609,28 +612,29 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 	/* Reset transmitter */
 	tx &= 1;
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
-		w = MCBSP_READ(mcbsp, XCCR);
+		w = MCBSP_READ_CACHE(mcbsp, XCCR);
 		w |= (tx ? XDISABLE : 0);
 		MCBSP_WRITE(mcbsp, XCCR, w);
 	}
-	w = MCBSP_READ(mcbsp, SPCR2);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR2);
 	MCBSP_WRITE(mcbsp, SPCR2, w & ~tx);
 
 	/* Reset receiver */
 	rx &= 1;
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
-		w = MCBSP_READ(mcbsp, RCCR);
+		w = MCBSP_READ_CACHE(mcbsp, RCCR);
 		w |= (rx ? RDISABLE : 0);
 		MCBSP_WRITE(mcbsp, RCCR, w);
 	}
-	w = MCBSP_READ(mcbsp, SPCR1);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR1);
 	MCBSP_WRITE(mcbsp, SPCR1, w & ~rx);
 
-	idle = !((MCBSP_READ(mcbsp, SPCR2) | MCBSP_READ(mcbsp, SPCR1)) & 1);
+	idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+			MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
 
 	if (idle) {
 		/* Reset the sample rate generator */
-		w = MCBSP_READ(mcbsp, SPCR2);
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
 		MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
 	}
 }
@@ -653,7 +657,7 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 	if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) {
 		/* clear error */
 		MCBSP_WRITE(mcbsp, SPCR2,
-				MCBSP_READ(mcbsp, SPCR2) & (~XSYNC_ERR));
+				MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XSYNC_ERR));
 		/* resend */
 		return -1;
 	} else {
@@ -662,10 +666,12 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 		while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) {
 			if (attemps++ > 1000) {
 				MCBSP_WRITE(mcbsp, SPCR2,
-					    MCBSP_READ(mcbsp, SPCR2) & (~XRST));
+						MCBSP_READ_CACHE(mcbsp, SPCR2) &
+						(~XRST));
 				udelay(10);
 				MCBSP_WRITE(mcbsp, SPCR2,
-					    MCBSP_READ(mcbsp, SPCR2) | (XRST));
+						MCBSP_READ_CACHE(mcbsp, SPCR2) |
+						(XRST));
 				udelay(10);
 				dev_err(mcbsp->dev, "Could not write to"
 					" McBSP%d Register\n", mcbsp->id);
@@ -692,7 +698,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 	if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) {
 		/* clear error */
 		MCBSP_WRITE(mcbsp, SPCR1,
-				MCBSP_READ(mcbsp, SPCR1) & (~RSYNC_ERR));
+				MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RSYNC_ERR));
 		/* resend */
 		return -1;
 	} else {
@@ -701,10 +707,12 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 		while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) {
 			if (attemps++ > 1000) {
 				MCBSP_WRITE(mcbsp, SPCR1,
-					    MCBSP_READ(mcbsp, SPCR1) & (~RRST));
+						MCBSP_READ_CACHE(mcbsp, SPCR1) &
+						(~RRST));
 				udelay(10);
 				MCBSP_WRITE(mcbsp, SPCR1,
-					    MCBSP_READ(mcbsp, SPCR1) | (RRST));
+						MCBSP_READ_CACHE(mcbsp, SPCR1) |
+						(RRST));
 				udelay(10);
 				dev_err(mcbsp->dev, "Could not read from"
 					" McBSP%d Register\n", mcbsp->id);
@@ -790,9 +798,11 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 		spcr2 = MCBSP_READ(mcbsp, SPCR2);
 		if (attempts++ > 1000) {
 			/* We must reset the transmitter */
-			MCBSP_WRITE(mcbsp, SPCR2, spcr2 & (~XRST));
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
 			udelay(10);
-			MCBSP_WRITE(mcbsp, SPCR2, spcr2 | XRST);
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d transmitter not "
 				"ready\n", mcbsp->id);
@@ -811,9 +821,11 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 		spcr1 = MCBSP_READ(mcbsp, SPCR1);
 		if (attempts++ > 1000) {
 			/* We must reset the receiver */
-			MCBSP_WRITE(mcbsp, SPCR1, spcr1 & (~RRST));
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
 			udelay(10);
-			MCBSP_WRITE(mcbsp, SPCR1, spcr1 | RRST);
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d receiver not "
 				"ready\n", mcbsp->id);
@@ -857,9 +869,11 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 		spcr2 = MCBSP_READ(mcbsp, SPCR2);
 		if (attempts++ > 1000) {
 			/* We must reset the transmitter */
-			MCBSP_WRITE(mcbsp, SPCR2, spcr2 & (~XRST));
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
 			udelay(10);
-			MCBSP_WRITE(mcbsp, SPCR2, spcr2 | XRST);
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d transmitter not "
 				"ready\n", mcbsp->id);
@@ -878,9 +892,11 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 		spcr1 = MCBSP_READ(mcbsp, SPCR1);
 		if (attempts++ > 1000) {
 			/* We must reset the receiver */
-			MCBSP_WRITE(mcbsp, SPCR1, spcr1 & (~RRST));
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
 			udelay(10);
-			MCBSP_WRITE(mcbsp, SPCR1, spcr1 | RRST);
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d receiver not "
 				"ready\n", mcbsp->id);