Merge branch 'origin'

Conflicts:
	Documentation/video4linux/CARDLIST.cx88
	drivers/media/video/cx88/Kconfig
	drivers/media/video/em28xx/em28xx-video.c
	drivers/media/video/saa7134/saa7134-dvb.c

Resolved as in the original merge by Mauro Carvalho Chehab

4 files changed, 41 insertions, 16 deletions

diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 26eac194064b..2e7c3c8ffe03 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -33,7 +33,6 @@
 #include <asm/proto.h>
 #include <asm/kdebug.h>
 #include <asm-generic/sections.h>
-#include <asm/kdebug.h>
 
 /* Page fault error code bits */
 #define PF_PROT	(1<<0)		/* or no page found */
@@ -157,8 +156,8 @@ void dump_pagetable(unsigned long address)
 
 	pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK); 
 	pgd += pgd_index(address);
-	printk("PGD %lx ", pgd_val(*pgd));
 	if (bad_address(pgd)) goto bad;
+	printk("PGD %lx ", pgd_val(*pgd));
 	if (!pgd_present(*pgd)) goto ret; 
 
 	pud = __pud_offset_k((pud_t *)pgd_page(*pgd), address);
diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c
index a5663e0bb01c..dd60e71fdba6 100644
--- a/arch/x86_64/mm/k8topology.c
+++ b/arch/x86_64/mm/k8topology.c
@@ -155,7 +155,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 	if (!found)
 		return -1; 
 
-	memnode_shift = compute_hash_shift(nodes, numnodes);
+	memnode_shift = compute_hash_shift(nodes, 8);
 	if (memnode_shift < 0) { 
 		printk(KERN_ERR "No NUMA node hash function found. Contact maintainer\n"); 
 		return -1; 
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index 6ef9f9a76235..22e51beee8d3 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -351,7 +351,7 @@ void __init init_cpu_to_node(void)
 			continue;
 		if (apicid_to_node[apicid] == NUMA_NO_NODE)
 			continue;
- 		cpu_to_node[i] = apicid_to_node[apicid];
+		numa_set_node(i,apicid_to_node[apicid]);
 	}
 }
 
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 8b7f85608fa8..482c25767369 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -26,6 +26,10 @@ static nodemask_t nodes_found __initdata;
 static struct node nodes[MAX_NUMNODES] __initdata;
 static u8 pxm2node[256] = { [0 ... 255] = 0xff };
 
+/* Too small nodes confuse the VM badly. Usually they result
+   from BIOS bugs. */
+#define NODE_MIN_SIZE (4*1024*1024)
+
 static int node_to_pxm(int n);
 
 int pxm_to_node(int pxm)
@@ -131,7 +135,12 @@ void __init
 acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
 {
 	int pxm, node;
-	if (srat_disabled() || pa->flags.enabled == 0)
+	if (srat_disabled())
+		return;
+	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {		bad_srat();
+		return;
+	}
+	if (pa->flags.enabled == 0)
 		return;
 	pxm = pa->proximity_domain;
 	node = setup_node(pxm);
@@ -155,8 +164,16 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 	int node, pxm;
 	int i;
 
-	if (srat_disabled() || ma->flags.enabled == 0)
+	if (srat_disabled())
+		return;
+	if (ma->header.length != sizeof(struct acpi_table_memory_affinity)) {
+		bad_srat();
 		return;
+	}
+	if (ma->flags.enabled == 0)
+		return;
+	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
+	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
 	pxm = ma->proximity_domain;
 	node = setup_node(pxm);
 	if (node < 0) {
@@ -164,8 +181,6 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 		bad_srat();
 		return;
 	}
-	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
-	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
 	/* It is fine to add this area to the nodes data it will be used later*/
 	if (ma->flags.hot_pluggable == 1)
 		printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n",
@@ -213,7 +228,8 @@ static int nodes_cover_memory(void)
 	}
 
 	e820ram = end_pfn - e820_hole_size(0, end_pfn);
-	if (pxmram < e820ram) {
+	/* We seem to lose 3 pages somewhere. Allow a bit of slack. */
+	if ((long)(e820ram - pxmram) >= 1*1024*1024) {
 		printk(KERN_ERR
 	"SRAT: PXMs only cover %luMB of your %luMB e820 RAM. Not used.\n",
 			(pxmram << PAGE_SHIFT) >> 20,
@@ -223,6 +239,16 @@ static int nodes_cover_memory(void)
 	return 1;
 }
 
+static void unparse_node(int node)
+{
+	int i;
+	node_clear(node, nodes_parsed);
+	for (i = 0; i < MAX_LOCAL_APIC; i++) {
+		if (apicid_to_node[i] == node)
+			apicid_to_node[i] = NUMA_NO_NODE;
+	}
+}
+
 void __init acpi_numa_arch_fixup(void) {}
 
 /* Use the information discovered above to actually set up the nodes. */
@@ -230,22 +256,22 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 {
 	int i;
 
-	if (acpi_numa <= 0)
-		return -1;
-
 	/* First clean up the node list */
-	for_each_node_mask(i, nodes_parsed) {
+	for (i = 0; i < MAX_NUMNODES; i++) {
 		cutoff_node(i, start, end);
-		if (nodes[i].start == nodes[i].end)
-			node_clear(i, nodes_parsed);
+		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
+			unparse_node(i);
 	}
 
+	if (acpi_numa <= 0)
+		return -1;
+
 	if (!nodes_cover_memory()) {
 		bad_srat();
 		return -1;
 	}
 
-	memnode_shift = compute_hash_shift(nodes, nodes_weight(nodes_parsed));
+	memnode_shift = compute_hash_shift(nodes, MAX_NUMNODES);
 	if (memnode_shift < 0) {
 		printk(KERN_ERR
 		     "SRAT: No NUMA node hash function found. Contact maintainer\n");