Remove old i386 setup code

This removes the old i386 setup code. This is done as a separate patch to avoid breaking git bisect as some of the i386 code was also used by the old x86-64 code. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
author: H. Peter Anvin <hpa@zytor.com> 2007-07-11 12:18:58 -0700
committer: Linus Torvalds <torvalds@woody.linux-foundation.org> 2007-07-12 10:55:56 -0700
commit: c39736823232bc3ca113c8228fa852c09fba300e (patch)
tree: 94fe2f8b27879cee904b09d1effb91ccc3ce6e0a /arch/i386
parent: 91a6c462b02d8dc02dbe95e5a407d78078a38d01 (diff)
download: talos-op-linux-c39736823232bc3ca113c8228fa852c09fba300e.tar.gz
talos-op-linux-c39736823232bc3ca113c8228fa852c09fba300e.zip
5 files changed, 0 insertions, 3541 deletions
diff --git a/arch/i386/boot/bootsect.S b/arch/i386/boot/bootsect.S
deleted file mode 100644
index 011b7a4993d4..000000000000
--- a/arch/i386/boot/bootsect.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *	bootsect.S		Copyright (C) 1991, 1992 Linus Torvalds
- *
- *	modified by Drew Eckhardt
- *	modified by Bruce Evans (bde)
- *	modified by Chris Noe (May 1999) (as86 -> gas)
- *	gutted by H. Peter Anvin (Jan 2003)
- *
- * BIG FAT NOTE: We're in real mode using 64k segments.  Therefore segment
- * addresses must be multiplied by 16 to obtain their respective linear
- * addresses. To avoid confusion, linear addresses are written using leading
- * hex while segment addresses are written as segment:offset.
- *
- */
-
-#include <asm/boot.h>
-
-SETUPSECTS	= 4			/* default nr of setup-sectors */
-BOOTSEG		= 0x07C0		/* original address of boot-sector */
-INITSEG		= DEF_INITSEG		/* we move boot here - out of the way */
-SETUPSEG	= DEF_SETUPSEG		/* setup starts here */
-SYSSEG		= DEF_SYSSEG		/* system loaded at 0x10000 (65536) */
-SYSSIZE		= DEF_SYSSIZE		/* system size: # of 16-byte clicks */
-					/* to be loaded */
-ROOT_DEV	= 0 			/* ROOT_DEV is now written by "build" */
-SWAP_DEV	= 0			/* SWAP_DEV is now written by "build" */
-
-#ifndef SVGA_MODE
-#define SVGA_MODE ASK_VGA
-#endif
-
-#ifndef RAMDISK
-#define RAMDISK 0
-#endif
-
-#ifndef ROOT_RDONLY
-#define ROOT_RDONLY 1
-#endif
-
-.code16
-.text
-
-.global _start
-_start:
-
-	# Normalize the start address
-	jmpl	$BOOTSEG, $start2
-
-start2:
-	movw	%cs, %ax
-	movw	%ax, %ds
-	movw	%ax, %es
-	movw	%ax, %ss
-	movw	$0x7c00, %sp
-	sti
-	cld
-
-	movw	$bugger_off_msg, %si
-
-msg_loop:
-	lodsb
-	andb	%al, %al
-	jz	die
-	movb	$0xe, %ah
-	movw	$7, %bx
-	int	$0x10
-	jmp	msg_loop
-
-die:
-	# Allow the user to press a key, then reboot
-	xorw	%ax, %ax
-	int	$0x16
-	int	$0x19
-
-	# int 0x19 should never return.  In case it does anyway,
-	# invoke the BIOS reset code...
-	ljmp	$0xf000,$0xfff0
-
-
-bugger_off_msg:
-	.ascii	"Direct booting from floppy is no longer supported.\r\n"
-	.ascii	"Please use a boot loader program instead.\r\n"
-	.ascii	"\n"
-	.ascii	"Remove disk and press any key to reboot . . .\r\n"
-	.byte	0
-
-
-	# Kernel attributes; used by setup
-
-	.org 497
-setup_sects:	.byte SETUPSECTS
-root_flags:	.word ROOT_RDONLY
-syssize:	.word SYSSIZE
-swap_dev:	.word SWAP_DEV
-ram_size:	.word RAMDISK
-vid_mode:	.word SVGA_MODE
-root_dev:	.word ROOT_DEV
-boot_flag:	.word 0xAA55
diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S
deleted file mode 100644
index 34321368011a..000000000000
--- a/arch/i386/boot/edd.S
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * BIOS Enhanced Disk Drive support
- * Copyright (C) 2002, 2003, 2004 Dell, Inc.
- * by Matt Domsch <Matt_Domsch@dell.com> October 2002
- * conformant to T13 Committee www.t13.org
- *   projects 1572D, 1484D, 1386D, 1226DT
- * disk signature read by Matt Domsch <Matt_Domsch@dell.com>
- *	and Andrew Wilks <Andrew_Wilks@dell.com> September 2003, June 2004
- * legacy CHS retrieval by Patrick J. LoPresti <patl@users.sourceforge.net>
- *      March 2004
- * Command line option parsing, Matt Domsch, November 2004
- */
-
-#include <linux/edd.h>
-#include <asm/setup.h>
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-
-# It is assumed that %ds == INITSEG here
-
-	movb	$0, (EDD_MBR_SIG_NR_BUF)
-	movb	$0, (EDDNR)
-
-# Check the command line for options:
-# edd=of  disables EDD completely  (edd=off)
-# edd=sk  skips the MBR test    (edd=skipmbr)
-# edd=on  re-enables EDD (edd=on)
-
-	pushl	%esi
-	movw	$edd_mbr_sig_start, %di	# Default to edd=on
-
-	movl	%cs:(cmd_line_ptr), %esi
-	andl	%esi, %esi
-	jz	old_cl			# Old boot protocol?
-
-# Convert to a real-mode pointer in fs:si
-	movl	%esi, %eax
-	shrl	$4, %eax
-	movw	%ax, %fs
-	andw	$0xf, %si
-	jmp	have_cl_pointer
-
-# Old-style boot protocol?
-old_cl:
-	push	%ds			# aka INITSEG
-	pop	%fs
-
-	cmpw	$0xa33f, (0x20)
-	jne	done_cl			# No command line at all?
-	movw	(0x22), %si		# Pointer relative to INITSEG
-
-# fs:si has the pointer to the command line now
-have_cl_pointer:
-
-# Loop through kernel command line one byte at a time.  Just in
-# case the loader is buggy and failed to null-terminate the command line
-# terminate if we get close enough to the end of the segment that we
-# cannot fit "edd=XX"...
-cl_atspace:
-	cmpw	$-5, %si		# Watch for segment wraparound
-	jae	done_cl
-	movl	%fs:(%si), %eax
-	andb	%al, %al		# End of line?
-	jz	done_cl
-	cmpl	$EDD_CL_EQUALS, %eax
-	jz	found_edd_equals
-	cmpb	$0x20, %al		# <= space consider whitespace
-	ja	cl_skipword
-	incw	%si
-	jmp	cl_atspace
-
-cl_skipword:
-	cmpw	$-5, %si		# Watch for segment wraparound
-	jae	done_cl
-	movb	%fs:(%si), %al		# End of string?
-	andb	%al, %al
-	jz	done_cl
-	cmpb	$0x20, %al
-	jbe	cl_atspace
-	incw	%si
-	jmp	cl_skipword
-
-found_edd_equals:
-# only looking at first two characters after equals
-# late overrides early on the command line, so keep going after finding something
-	movw	%fs:4(%si), %ax
-	cmpw	$EDD_CL_OFF, %ax	# edd=of
-	je	do_edd_off
-	cmpw	$EDD_CL_SKIP, %ax	# edd=sk
-	je	do_edd_skipmbr
-	cmpw	$EDD_CL_ON, %ax		# edd=on
-	je	do_edd_on
-	jmp	cl_skipword
-do_edd_skipmbr:
-	movw	$edd_start, %di
-	jmp	cl_skipword
-do_edd_off:
-	movw	$edd_done, %di
-	jmp	cl_skipword
-do_edd_on:
-	movw	$edd_mbr_sig_start, %di
-	jmp	cl_skipword
-
-done_cl:
-	popl	%esi
-	jmpw	*%di
-
-# Read the first sector of each BIOS disk device and store the 4-byte signature
-edd_mbr_sig_start:
-	movb	$0x80, %dl			# from device 80
-	movw	$EDD_MBR_SIG_BUF, %bx		# store buffer ptr in bx
-edd_mbr_sig_read:
-	movl	$0xFFFFFFFF, %eax
-	movl	%eax, (%bx)			# assume failure
-	pushw	%bx
-	movb	$READ_SECTORS, %ah
-	movb	$1, %al				# read 1 sector
-	movb	$0, %dh				# at head 0
-	movw	$1, %cx				# cylinder 0, sector 0
-	pushw	%es
-	pushw	%ds
-	popw	%es
-    	movw	$EDDBUF, %bx			# disk's data goes into EDDBUF
-	pushw	%dx             # work around buggy BIOSes
-	stc                     # work around buggy BIOSes
-	int	$0x13
-	sti                     # work around buggy BIOSes
-	popw	%dx
-	popw	%es
-	popw	%bx
-	jc	edd_mbr_sig_done		# on failure, we're done.
-	cmpb	$0, %ah		# some BIOSes do not set CF
-	jne	edd_mbr_sig_done		# on failure, we're done.
-	movl	(EDDBUF+EDD_MBR_SIG_OFFSET), %eax # read sig out of the MBR
-	movl	%eax, (%bx)			# store success
-	incb	(EDD_MBR_SIG_NR_BUF)		# note that we stored something
-	incb	%dl				# increment to next device
-	addw	$4, %bx				# increment sig buffer ptr
-	cmpb	$EDD_MBR_SIG_MAX, (EDD_MBR_SIG_NR_BUF)	# Out of space?
-	jb	edd_mbr_sig_read		# keep looping
-edd_mbr_sig_done:
-
-# Do the BIOS Enhanced Disk Drive calls
-# This consists of two calls:
-#    int 13h ah=41h "Check Extensions Present"
-#    int 13h ah=48h "Get Device Parameters"
-#    int 13h ah=08h "Legacy Get Device Parameters"
-#
-# A buffer of size EDDMAXNR*(EDDEXTSIZE+EDDPARMSIZE) is reserved for our use
-# in the boot_params at EDDBUF.  The first four bytes of which are
-# used to store the device number, interface support map and version
-# results from fn41.  The next four bytes are used to store the legacy
-# cylinders, heads, and sectors from fn08. The following 74 bytes are used to
-# store the results from fn48.  Starting from device 80h, fn41, then fn48
-# are called and their results stored in EDDBUF+n*(EDDEXTSIZE+EDDPARMIZE).
-# Then the pointer is incremented to store the data for the next call.
-# This repeats until either a device doesn't exist, or until EDDMAXNR
-# devices have been stored.
-# The one tricky part is that ds:si always points EDDEXTSIZE bytes into
-# the structure, and the fn41 and fn08 results are stored at offsets
-# from there.  This removes the need to increment the pointer for
-# every store, and leaves it ready for the fn48 call.
-# A second one-byte buffer, EDDNR, in the boot_params stores
-# the number of BIOS devices which exist, up to EDDMAXNR.
-# In setup.c, copy_edd() stores both boot_params buffers away
-# for later use, as they would get overwritten otherwise.
-# This code is sensitive to the size of the structs in edd.h
-edd_start:
-						# %ds points to the bootsector
-       						# result buffer for fn48
-	movw	$EDDBUF+EDDEXTSIZE, %si		# in ds:si, fn41 results
-						# kept just before that
-	movb	$0x80, %dl			# BIOS device 0x80
-
-edd_check_ext:
-	movb	$CHECKEXTENSIONSPRESENT, %ah    # Function 41
-	movw	$EDDMAGIC1, %bx			# magic
-	int	$0x13				# make the call
-	jc	edd_done			# no more BIOS devices
-
-	cmpw	$EDDMAGIC2, %bx			# is magic right?
-	jne	edd_next			# nope, next...
-
-	movb	%dl, %ds:-8(%si)		# store device number
-	movb	%ah, %ds:-7(%si)		# store version
-	movw	%cx, %ds:-6(%si)		# store extensions
-	incb	(EDDNR)				# note that we stored something
-
-edd_get_device_params:
-	movw	$EDDPARMSIZE, %ds:(%si)		# put size
-	movw	$0x0, %ds:2(%si)		# work around buggy BIOSes
-	movb	$GETDEVICEPARAMETERS, %ah	# Function 48
-	int	$0x13				# make the call
-						# Don't check for fail return
-						# it doesn't matter.
-edd_get_legacy_chs:
-	xorw    %ax, %ax
-	movw    %ax, %ds:-4(%si)
-	movw    %ax, %ds:-2(%si)
-        # Ralf Brown's Interrupt List says to set ES:DI to
-	# 0000h:0000h "to guard against BIOS bugs"
-	pushw   %es
-	movw    %ax, %es
-	movw    %ax, %di
-	pushw   %dx                             # legacy call clobbers %dl
-	movb    $LEGACYGETDEVICEPARAMETERS, %ah # Function 08
-	int     $0x13                           # make the call
-	jc      edd_legacy_done                 # failed
-	movb    %cl, %al                        # Low 6 bits are max
-	andb    $0x3F, %al                      #   sector number
-	movb	%al, %ds:-1(%si)                # Record max sect
-	movb    %dh, %ds:-2(%si)                # Record max head number
-	movb    %ch, %al                        # Low 8 bits of max cyl
-	shr     $6, %cl
-	movb    %cl, %ah                        # High 2 bits of max cyl
-	movw    %ax, %ds:-4(%si)
-
-edd_legacy_done:
-	popw    %dx
-	popw    %es
-	movw	%si, %ax			# increment si
-	addw	$EDDPARMSIZE+EDDEXTSIZE, %ax
-	movw	%ax, %si
-
-edd_next:
-	incb	%dl				# increment to next device
-	cmpb	$EDDMAXNR, (EDDNR) 		# Out of space?
-	jb	edd_check_ext			# keep looping
-
-edd_done:
-#endif
diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
deleted file mode 100644
index 6dbcc95b2120..000000000000
--- a/arch/i386/boot/setup.S
+++ /dev/null
@@ -1,1075 +0,0 @@
-/*
- *	setup.S		Copyright (C) 1991, 1992 Linus Torvalds
- *
- * setup.s is responsible for getting the system data from the BIOS,
- * and putting them into the appropriate places in system memory.
- * both setup.s and system has been loaded by the bootblock.
- *
- * This code asks the bios for memory/disk/other parameters, and
- * puts them in a "safe" place: 0x90000-0x901FF, ie where the
- * boot-block used to be. It is then up to the protected mode
- * system to read them from there before the area is overwritten
- * for buffer-blocks.
- *
- * Move PS/2 aux init code to psaux.c
- * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
- *
- * some changes and additional features by Christoph Niemann,
- * March 1993/June 1994 (Christoph.Niemann@linux.org)
- *
- * add APM BIOS checking by Stephen Rothwell, May 1994
- * (sfr@canb.auug.org.au)
- *
- * High load stuff, initrd support and position independency
- * by Hans Lermen & Werner Almesberger, February 1996
- * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
- *
- * Video handling moved to video.S by Martin Mares, March 1996
- * <mj@k332.feld.cvut.cz>
- *
- * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
- * parsons) to avoid loadlin confusion, July 1997
- *
- * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
- * <stiker@northlink.com>
- *
- * Fix to work around buggy BIOSes which don't use carry bit correctly
- * and/or report extended memory in CX/DX for e801h memory size detection 
- * call.  As a result the kernel got wrong figures.  The int15/e801h docs
- * from Ralf Brown interrupt list seem to indicate AX/BX should be used
- * anyway.  So to avoid breaking many machines (presumably there was a reason
- * to orginally use CX/DX instead of AX/BX), we do a kludge to see
- * if CX/DX have been changed in the e801 call and if so use AX/BX .
- * Michael Miller, April 2001 <michaelm@mjmm.org>
- *
- * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
- * by Robert Schwebel, December 2001 <robert@schwebel.de>
- */
-
-#include <asm/segment.h>
-#include <linux/utsrelease.h>
-#include <linux/compile.h>
-#include <asm/boot.h>
-#include <asm/e820.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-	
-/* Signature words to ensure LILO loaded us right */
-#define SIG1	0xAA55
-#define SIG2	0x5A5A
-
-INITSEG  = DEF_INITSEG		# 0x9000, we move boot here, out of the way
-SYSSEG   = DEF_SYSSEG		# 0x1000, system loaded at 0x10000 (65536).
-SETUPSEG = DEF_SETUPSEG		# 0x9020, this is the current segment
-				# ... and the former contents of CS
-
-DELTA_INITSEG = SETUPSEG - INITSEG	# 0x0020
-
-.code16
-.globl begtext, begdata, begbss, endtext, enddata, endbss
-
-.text
-begtext:
-.data
-begdata:
-.bss
-begbss:
-.text
-
-start:
-	jmp	trampoline
-
-# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
-
-		.ascii	"HdrS"		# header signature
-		.word	0x0206		# header version number (>= 0x0105)
-					# or else old loadlin-1.5 will fail)
-realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
-start_sys_seg:	.word	SYSSEG
-		.word	kernel_version	# pointing to kernel version string
-					# above section of header is compatible
-					# with loadlin-1.5 (header v1.5). Don't
-					# change it.
-
-type_of_loader:	.byte	0		# = 0, old one (LILO, Loadlin,
-					#      Bootlin, SYSLX, bootsect...)
-					# See Documentation/i386/boot.txt for
-					# assigned ids
-	
-# flags, unused bits must be zero (RFU) bit within loadflags
-loadflags:
-LOADED_HIGH	= 1			# If set, the kernel is loaded high
-CAN_USE_HEAP	= 0x80			# If set, the loader also has set
-					# heap_end_ptr to tell how much
-					# space behind setup.S can be used for
-					# heap purposes.
-					# Only the loader knows what is free
-#ifndef __BIG_KERNEL__
-		.byte	0
-#else
-		.byte	LOADED_HIGH
-#endif
-
-setup_move_size: .word  0x8000		# size to move, when setup is not
-					# loaded at 0x90000. We will move setup 
-					# to 0x90000 then just before jumping
-					# into the kernel. However, only the
-					# loader knows how much data behind
-					# us also needs to be loaded.
-
-code32_start:				# here loaders can put a different
-					# start address for 32-bit code.
-#ifndef __BIG_KERNEL__
-		.long	0x1000		#   0x1000 = default for zImage
-#else
-		.long	0x100000	# 0x100000 = default for big kernel
-#endif
-
-ramdisk_image:	.long	0		# address of loaded ramdisk image
-					# Here the loader puts the 32-bit
-					# address where it loaded the image.
-					# This only will be read by the kernel.
-
-ramdisk_size:	.long	0		# its size in bytes
-
-bootsect_kludge:
-		.long	0		# obsolete
-
-heap_end_ptr:	.word	modelist+1024	# (Header version 0x0201 or later)
-					# space from here (exclusive) down to
-					# end of setup code can be used by setup
-					# for local heap purposes.
-
-pad1:		.word	0
-cmd_line_ptr:	.long 0			# (Header version 0x0202 or later)
-					# If nonzero, a 32-bit pointer
-					# to the kernel command line.
-					# The command line should be
-					# located between the start of
-					# setup and the end of low
-					# memory (0xa0000), or it may
-					# get overwritten before it
-					# gets read.  If this field is
-					# used, there is no longer
-					# anything magical about the
-					# 0x90000 segment; the setup
-					# can be located anywhere in
-					# low memory 0x10000 or higher.
-
-ramdisk_max:	.long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
-					# (Header version 0x0203 or later)
-					# The highest safe address for
-					# the contents of an initrd
-
-kernel_alignment:  .long CONFIG_PHYSICAL_ALIGN 	#physical addr alignment
-						#required for protected mode
-						#kernel
-#ifdef CONFIG_RELOCATABLE
-relocatable_kernel:    .byte 1
-#else
-relocatable_kernel:    .byte 0
-#endif
-pad2:			.byte 0
-pad3:			.word 0
-
-cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
-                                                #added with boot protocol
-                                                #version 2.06
-
-trampoline:	call	start_of_setup
-		.align 16
-					# The offset at this point is 0x240
-		.space	(0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
-# End of setup header #####################################################
-
-start_of_setup:
-# Bootlin depends on this being done early
-	movw	$0x01500, %ax
-	movb	$0x81, %dl
-	int	$0x13
-
-#ifdef SAFE_RESET_DISK_CONTROLLER
-# Reset the disk controller.
-	movw	$0x0000, %ax
-	movb	$0x80, %dl
-	int	$0x13
-#endif
-
-# Set %ds = %cs, we know that SETUPSEG = %cs at this point
-	movw	%cs, %ax		# aka SETUPSEG
-	movw	%ax, %ds
-# Check signature at end of setup
-	cmpw	$SIG1, setup_sig1
-	jne	bad_sig
-
-	cmpw	$SIG2, setup_sig2
-	jne	bad_sig
-
-	jmp	good_sig1
-
-# Routine to print asciiz string at ds:si
-prtstr:
-	lodsb
-	andb	%al, %al
-	jz	fin
-
-	call	prtchr
-	jmp	prtstr
-
-fin:	ret
-
-# Space printing
-prtsp2:	call	prtspc		# Print double space
-prtspc:	movb	$0x20, %al	# Print single space (note: fall-thru)
-
-# Part of above routine, this one just prints ascii al
-prtchr:	pushw	%ax
-	pushw	%cx
-	movw	$7,%bx
-	movw	$0x01, %cx
-	movb	$0x0e, %ah
-	int	$0x10
-	popw	%cx
-	popw	%ax
-	ret
-
-beep:	movb	$0x07, %al
-	jmp	prtchr
-	
-no_sig_mess: .string	"No setup signature found ..."
-
-good_sig1:
-	jmp	good_sig
-
-# We now have to find the rest of the setup code/data
-bad_sig:
-	movw	%cs, %ax			# SETUPSEG
-	subw	$DELTA_INITSEG, %ax		# INITSEG
-	movw	%ax, %ds
-	xorb	%bh, %bh
-	movb	(497), %bl			# get setup sect from bootsect
-	subw	$4, %bx				# LILO loads 4 sectors of setup
-	shlw	$8, %bx				# convert to words (1sect=2^8 words)
-	movw	%bx, %cx
-	shrw	$3, %bx				# convert to segment
-	addw	$SYSSEG, %bx
-	movw	%bx, %cs:start_sys_seg
-# Move rest of setup code/data to here
-	movw	$2048, %di			# four sectors loaded by LILO
-	subw	%si, %si
-	pushw	%cs
-	popw	%es
-	movw	$SYSSEG, %ax
-	movw	%ax, %ds
-	rep
-	movsw
-	movw	%cs, %ax			# aka SETUPSEG
-	movw	%ax, %ds
-	cmpw	$SIG1, setup_sig1
-	jne	no_sig
-
-	cmpw	$SIG2, setup_sig2
-	jne	no_sig
-
-	jmp	good_sig
-
-no_sig:
-	lea	no_sig_mess, %si
-	call	prtstr
-
-no_sig_loop:
-	hlt
-	jmp	no_sig_loop
-
-good_sig:
-	movw	%cs, %ax			# aka SETUPSEG
-	subw	$DELTA_INITSEG, %ax 		# aka INITSEG
-	movw	%ax, %ds
-# Check if an old loader tries to load a big-kernel
-	testb	$LOADED_HIGH, %cs:loadflags	# Do we have a big kernel?
-	jz	loader_ok			# No, no danger for old loaders.
-
-	cmpb	$0, %cs:type_of_loader 		# Do we have a loader that
-						# can deal with us?
-	jnz	loader_ok			# Yes, continue.
-
-	pushw	%cs				# No, we have an old loader,
-	popw	%ds				# die. 
-	lea	loader_panic_mess, %si
-	call	prtstr
-
-	jmp	no_sig_loop
-
-loader_panic_mess: .string "Wrong loader, giving up..."
-
-# check minimum cpuid
-# we do this here because it is the last place we can actually
-# show a user visible error message. Later the video modus
-# might be already messed up.
-loader_ok:
-	call verify_cpu
-	testl  %eax,%eax
-	jz	cpu_ok
-	movw	%cs,%ax		# aka SETUPSEG
-	movw	%ax,%ds
-	lea	cpu_panic_mess,%si
-	call	prtstr
-1:	jmp	1b
-
-cpu_panic_mess:
-	.asciz  "PANIC: CPU too old for this kernel."
-
-#include "../kernel/verify_cpu.S"
-
-cpu_ok:
-# Get memory size (extended mem, kB)
-
-	xorl	%eax, %eax
-	movl	%eax, (0x1e0)
-#ifndef STANDARD_MEMORY_BIOS_CALL
-	movb	%al, (E820NR)
-# Try three different memory detection schemes.  First, try
-# e820h, which lets us assemble a memory map, then try e801h,
-# which returns a 32-bit memory size, and finally 88h, which
-# returns 0-64m
-
-# method E820H:
-# the memory map from hell.  e820h returns memory classified into
-# a whole bunch of different types, and allows memory holes and
-# everything.  We scan through this memory map and build a list
-# of the first 32 memory areas, which we return at [E820MAP].
-# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
-
-#define SMAP  0x534d4150
-
-meme820:
-	xorl	%ebx, %ebx			# continuation counter
-	movw	$E820MAP, %di			# point into the whitelist
-						# so we can have the bios
-						# directly write into it.
-
-jmpe820:
-	movl	$0x0000e820, %eax		# e820, upper word zeroed
-	movl	$SMAP, %edx			# ascii 'SMAP'
-	movl	$20, %ecx			# size of the e820rec
-	pushw	%ds				# data record.
-	popw	%es
-	int	$0x15				# make the call
-	jc	bail820				# fall to e801 if it fails
-
-	cmpl	$SMAP, %eax			# check the return is `SMAP'
-	jne	bail820				# fall to e801 if it fails
-
-#	cmpl	$1, 16(%di)			# is this usable memory?
-#	jne	again820
-
-	# If this is usable memory, we save it by simply advancing %di by
-	# sizeof(e820rec).
-	#
-good820:
-	movb	(E820NR), %al			# up to 128 entries
-	cmpb	$E820MAX, %al
-	jae	bail820
-
-	incb	(E820NR)
-	movw	%di, %ax
-	addw	$20, %ax
-	movw	%ax, %di
-again820:
-	cmpl	$0, %ebx			# check to see if
-	jne	jmpe820				# %ebx is set to EOF
-bail820:
-
-
-# method E801H:
-# memory size is in 1k chunksizes, to avoid confusing loadlin.
-# we store the 0xe801 memory size in a completely different place,
-# because it will most likely be longer than 16 bits.
-# (use 1e0 because that's what Larry Augustine uses in his
-# alternative new memory detection scheme, and it's sensible
-# to write everything into the same place.)
-
-meme801:
-	stc					# fix to work around buggy
-	xorw	%cx,%cx				# BIOSes which don't clear/set
-	xorw	%dx,%dx				# carry on pass/error of
-						# e801h memory size call
-						# or merely pass cx,dx though
-						# without changing them.
-	movw	$0xe801, %ax
-	int	$0x15
-	jc	mem88
-
-	cmpw	$0x0, %cx			# Kludge to handle BIOSes
-	jne	e801usecxdx			# which report their extended
-	cmpw	$0x0, %dx			# memory in AX/BX rather than
-	jne	e801usecxdx			# CX/DX.  The spec I have read
-	movw	%ax, %cx			# seems to indicate AX/BX 
-	movw	%bx, %dx			# are more reasonable anyway...
-
-e801usecxdx:
-	andl	$0xffff, %edx			# clear sign extend
-	shll	$6, %edx			# and go from 64k to 1k chunks
-	movl	%edx, (0x1e0)			# store extended memory size
-	andl	$0xffff, %ecx			# clear sign extend
- 	addl	%ecx, (0x1e0)			# and add lower memory into
-						# total size.
-
-# Ye Olde Traditional Methode.  Returns the memory size (up to 16mb or
-# 64mb, depending on the bios) in ax.
-mem88:
-
-#endif
-	movb	$0x88, %ah
-	int	$0x15
-	movw	%ax, (2)
-
-# Set the keyboard repeat rate to the max
-	movw	$0x0305, %ax
-	xorw	%bx, %bx
-	int	$0x16
-
-# Check for video adapter and its parameters and allow the
-# user to browse video modes.
-	call	video				# NOTE: we need %ds pointing
-						# to bootsector
-
-# Get hd0 data...
-	xorw	%ax, %ax
-	movw	%ax, %ds
-	ldsw	(4 * 0x41), %si
-	movw	%cs, %ax			# aka SETUPSEG
-	subw	$DELTA_INITSEG, %ax		# aka INITSEG
-	pushw	%ax
-	movw	%ax, %es
-	movw	$0x0080, %di
-	movw	$0x10, %cx
-	pushw	%cx
-	cld
-	rep
- 	movsb
-# Get hd1 data...
-	xorw	%ax, %ax
-	movw	%ax, %ds
-	ldsw	(4 * 0x46), %si
-	popw	%cx
-	popw	%es
-	movw	$0x0090, %di
-	rep
-	movsb
-# Check that there IS a hd1 :-)
-	movw	$0x01500, %ax
-	movb	$0x81, %dl
-	int	$0x13
-	jc	no_disk1
-	
-	cmpb	$3, %ah
-	je	is_disk1
-
-no_disk1:
-	movw	%cs, %ax			# aka SETUPSEG
-	subw	$DELTA_INITSEG, %ax 		# aka INITSEG
-	movw	%ax, %es
-	movw	$0x0090, %di
-	movw	$0x10, %cx
-	xorw	%ax, %ax
-	cld
-	rep
-	stosb
-is_disk1:
-# check for Micro Channel (MCA) bus
-	movw	%cs, %ax			# aka SETUPSEG
-	subw	$DELTA_INITSEG, %ax		# aka INITSEG
-	movw	%ax, %ds
-	xorw	%ax, %ax
-	movw	%ax, (0xa0)			# set table length to 0
-	movb	$0xc0, %ah
-	stc
-	int	$0x15				# moves feature table to es:bx
-	jc	no_mca
-
-	pushw	%ds
-	movw	%es, %ax
-	movw	%ax, %ds
-	movw	%cs, %ax			# aka SETUPSEG
-	subw	$DELTA_INITSEG, %ax		# aka INITSEG
-	movw	%ax, %es
-	movw	%bx, %si
-	movw	$0xa0, %di
-	movw	(%si), %cx
-	addw	$2, %cx				# table length is a short
-	cmpw	$0x10, %cx
-	jc	sysdesc_ok
-
-	movw	$0x10, %cx			# we keep only first 16 bytes
-sysdesc_ok:
-	rep
-	movsb
-	popw	%ds
-no_mca:
-#ifdef CONFIG_X86_VOYAGER
-	movb	$0xff, 0x40	# flag on config found
-	movb	$0xc0, %al
-	mov	$0xff, %ah
-	int	$0x15		# put voyager config info at es:di
-	jc	no_voyager
-	movw	$0x40, %si	# place voyager info in apm table
-	cld
-	movw	$7, %cx
-voyager_rep:
-	movb	%es:(%di), %al
-	movb	%al,(%si)
-	incw	%di
-	incw	%si
-	decw	%cx
-	jnz	voyager_rep
-no_voyager:	
-#endif
-# Check for PS/2 pointing device
-	movw	%cs, %ax			# aka SETUPSEG
-	subw	$DELTA_INITSEG, %ax		# aka INITSEG
-	movw	%ax, %ds
-	movb	$0, (0x1ff)			# default is no pointing device
-	int	$0x11				# int 0x11: equipment list
-	testb	$0x04, %al			# check if mouse installed
-	jz	no_psmouse
-
-	movb	$0xAA, (0x1ff)			# device present
-no_psmouse:
-
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-	movl	$0x0000E980, %eax		# IST Support 
-	movl	$0x47534943, %edx		# Request value
-	int	$0x15
-
-	movl	%eax, (96)
-	movl	%ebx, (100)
-	movl	%ecx, (104)
-	movl	%edx, (108)
-#endif
-
-#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
-# Then check for an APM BIOS...
-						# %ds points to the bootsector
-	movw	$0, 0x40			# version = 0 means no APM BIOS
-	movw	$0x05300, %ax			# APM BIOS installation check
-	xorw	%bx, %bx
-	int	$0x15
-	jc	done_apm_bios			# Nope, no APM BIOS
-	
-	cmpw	$0x0504d, %bx			# Check for "PM" signature
-	jne	done_apm_bios			# No signature, no APM BIOS
-
-	andw	$0x02, %cx			# Is 32 bit supported?
-	je	done_apm_bios			# No 32-bit, no (good) APM BIOS
-
-	movw	$0x05304, %ax			# Disconnect first just in case
-	xorw	%bx, %bx
-	int	$0x15				# ignore return code
-	movw	$0x05303, %ax			# 32 bit connect
-	xorl	%ebx, %ebx
-	xorw	%cx, %cx			# paranoia :-)
-	xorw	%dx, %dx			#   ...
-	xorl	%esi, %esi			#   ...
-	xorw	%di, %di			#   ...
-	int	$0x15
-	jc	no_32_apm_bios			# Ack, error. 
-
-	movw	%ax,  (66)			# BIOS code segment
-	movl	%ebx, (68)			# BIOS entry point offset
-	movw	%cx,  (72)			# BIOS 16 bit code segment
-	movw	%dx,  (74)			# BIOS data segment
-	movl	%esi, (78)			# BIOS code segment lengths
-	movw	%di,  (82)			# BIOS data segment length
-# Redo the installation check as the 32 bit connect
-# modifies the flags returned on some BIOSs
-	movw	$0x05300, %ax			# APM BIOS installation check
-	xorw	%bx, %bx
-	xorw	%cx, %cx			# paranoia
-	int	$0x15
-	jc	apm_disconnect			# error -> shouldn't happen
-
-	cmpw	$0x0504d, %bx			# check for "PM" signature
-	jne	apm_disconnect			# no sig -> shouldn't happen
-
-	movw	%ax, (64)			# record the APM BIOS version
-	movw	%cx, (76)			# and flags
-	jmp	done_apm_bios
-
-apm_disconnect:					# Tidy up
-	movw	$0x05304, %ax			# Disconnect
-	xorw	%bx, %bx
-	int	$0x15				# ignore return code
-
-	jmp	done_apm_bios
-
-no_32_apm_bios:
-	andw	$0xfffd, (76)			# remove 32 bit support bit
-done_apm_bios:
-#endif
-
-#include "edd.S"
-
-# Now we want to move to protected mode ...
-	cmpw	$0, %cs:realmode_swtch
-	jz	rmodeswtch_normal
-
-	lcall	*%cs:realmode_swtch
-
-	jmp	rmodeswtch_end
-
-rmodeswtch_normal:
-        pushw	%cs
-	call	default_switch
-
-rmodeswtch_end:
-# Now we move the system to its rightful place ... but we check if we have a
-# big-kernel. In that case we *must* not move it ...
-	testb	$LOADED_HIGH, %cs:loadflags
-	jz	do_move0			# .. then we have a normal low
-						# loaded zImage
-						# .. or else we have a high
-						# loaded bzImage
-	jmp	end_move			# ... and we skip moving
-
-do_move0:
-	movw	$0x100, %ax			# start of destination segment
-	movw	%cs, %bp			# aka SETUPSEG
-	subw	$DELTA_INITSEG, %bp		# aka INITSEG
-	movw	%cs:start_sys_seg, %bx		# start of source segment
-	cld
-do_move:
-	movw	%ax, %es			# destination segment
-	incb	%ah				# instead of add ax,#0x100
-	movw	%bx, %ds			# source segment
-	addw	$0x100, %bx
-	subw	%di, %di
-	subw	%si, %si
-	movw 	$0x800, %cx
-	rep
-	movsw
-	cmpw	%bp, %bx			# assume start_sys_seg > 0x200,
-						# so we will perhaps read one
-						# page more than needed, but
-						# never overwrite INITSEG
-						# because destination is a
-						# minimum one page below source
-	jb	do_move
-
-end_move:
-# then we load the segment descriptors
-	movw	%cs, %ax			# aka SETUPSEG
-	movw	%ax, %ds
-		
-# Check whether we need to be downward compatible with version <=201
-	cmpl	$0, cmd_line_ptr
-	jne	end_move_self		# loader uses version >=202 features
-	cmpb	$0x20, type_of_loader
-	je	end_move_self		# bootsect loader, we know of it
-
-# Boot loader doesnt support boot protocol version 2.02.
-# If we have our code not at 0x90000, we need to move it there now.
-# We also then need to move the params behind it (commandline)
-# Because we would overwrite the code on the current IP, we move
-# it in two steps, jumping high after the first one.
-	movw	%cs, %ax
-	cmpw	$SETUPSEG, %ax
-	je	end_move_self
-
-	cli					# make sure we really have
-						# interrupts disabled !
-						# because after this the stack
-						# should not be used
-	subw	$DELTA_INITSEG, %ax		# aka INITSEG
-	movw	%ss, %dx
-	cmpw	%ax, %dx
-	jb	move_self_1
-
-	addw	$INITSEG, %dx
-	subw	%ax, %dx			# this will go into %ss after
-						# the move
-move_self_1:
-	movw	%ax, %ds
-	movw	$INITSEG, %ax			# real INITSEG
-	movw	%ax, %es
-	movw	%cs:setup_move_size, %cx
-	std					# we have to move up, so we use
-						# direction down because the
-						# areas may overlap
-	movw	%cx, %di
-	decw	%di
-	movw	%di, %si
-	subw	$move_self_here+0x200, %cx
-	rep
-	movsb
-	ljmp	$SETUPSEG, $move_self_here
-
-move_self_here:
-	movw	$move_self_here+0x200, %cx
-	rep
-	movsb
-	movw	$SETUPSEG, %ax
-	movw	%ax, %ds
-	movw	%dx, %ss
-end_move_self:					# now we are at the right place
-
-#
-# Enable A20.  This is at the very best an annoying procedure.
-# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
-# AMD Elan bug fix by Robert Schwebel.
-#
-
-#if defined(CONFIG_X86_ELAN)
-	movb $0x02, %al			# alternate A20 gate
-	outb %al, $0x92			# this works on SC410/SC520
-a20_elan_wait:
-	call a20_test
-	jz a20_elan_wait
-	jmp a20_done
-#endif
-
-
-A20_TEST_LOOPS		=  32		# Iterations per wait
-A20_ENABLE_LOOPS	= 255		# Total loops to try		
-
-
-#ifndef CONFIG_X86_VOYAGER
-a20_try_loop:
-
-	# First, see if we are on a system with no A20 gate.
-a20_none:
-	call	a20_test
-	jnz	a20_done
-
-	# Next, try the BIOS (INT 0x15, AX=0x2401)
-a20_bios:
-	movw	$0x2401, %ax
-	pushfl					# Be paranoid about flags
-	int	$0x15
-	popfl
-
-	call	a20_test
-	jnz	a20_done
-
-	# Try enabling A20 through the keyboard controller
-#endif /* CONFIG_X86_VOYAGER */
-a20_kbc:
-	call	empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
-	call	a20_test			# Just in case the BIOS worked
-	jnz	a20_done			# but had a delayed reaction.
-#endif
-
-	movb	$0xD1, %al			# command write
-	outb	%al, $0x64
-	call	empty_8042
-
-	movb	$0xDF, %al			# A20 on
-	outb	%al, $0x60
-	call	empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
-	# Wait until a20 really *is* enabled; it can take a fair amount of
-	# time on certain systems; Toshiba Tecras are known to have this
-	# problem.
-a20_kbc_wait:
-	xorw	%cx, %cx
-a20_kbc_wait_loop:
-	call	a20_test
-	jnz	a20_done
-	loop	a20_kbc_wait_loop
-
-	# Final attempt: use "configuration port A"
-a20_fast:
-	inb	$0x92, %al			# Configuration Port A
-	orb	$0x02, %al			# "fast A20" version
-	andb	$0xFE, %al			# don't accidentally reset
-	outb	%al, $0x92
-
-	# Wait for configuration port A to take effect
-a20_fast_wait:
-	xorw	%cx, %cx
-a20_fast_wait_loop:
-	call	a20_test
-	jnz	a20_done
-	loop	a20_fast_wait_loop
-
-	# A20 is still not responding.  Try frobbing it again.
-	# 
-	decb	(a20_tries)
-	jnz	a20_try_loop
-	
-	movw	$a20_err_msg, %si
-	call	prtstr
-
-a20_die:
-	hlt
-	jmp	a20_die
-
-a20_tries:
-	.byte	A20_ENABLE_LOOPS
-
-a20_err_msg:
-	.ascii	"linux: fatal error: A20 gate not responding!"
-	.byte	13, 10, 0
-
-	# If we get here, all is good
-a20_done:
-
-#endif /* CONFIG_X86_VOYAGER */
-# set up gdt and idt and 32bit start address
-	lidt	idt_48				# load idt with 0,0
-	xorl	%eax, %eax			# Compute gdt_base
-	movw	%ds, %ax			# (Convert %ds:gdt to a linear ptr)
-	shll	$4, %eax
-	addl	%eax, code32
-	addl	$gdt, %eax
-	movl	%eax, (gdt_48+2)
-	lgdt	gdt_48				# load gdt with whatever is
-						# appropriate
-
-# make sure any possible coprocessor is properly reset..
-	xorw	%ax, %ax
-	outb	%al, $0xf0
-	call	delay
-
-	outb	%al, $0xf1
-	call	delay
-
-# well, that went ok, I hope. Now we mask all interrupts - the rest
-# is done in init_IRQ().
-	movb	$0xFF, %al			# mask all interrupts for now
-	outb	%al, $0xA1
-	call	delay
-	
-	movb	$0xFB, %al			# mask all irq's but irq2 which
-	outb	%al, $0x21			# is cascaded
-
-# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
-# need no steenking BIOS anyway (except for the initial loading :-).
-# The BIOS-routine wants lots of unnecessary data, and it's less
-# "interesting" anyway. This is how REAL programmers do it.
-#
-# Well, now's the time to actually move into protected mode. To make
-# things as simple as possible, we do no register set-up or anything,
-# we let the gnu-compiled 32-bit programs do that. We just jump to
-# absolute address 0x1000 (or the loader supplied one),
-# in 32-bit protected mode.
-#
-# Note that the short jump isn't strictly needed, although there are
-# reasons why it might be a good idea. It won't hurt in any case.
-	movw	$1, %ax				# protected mode (PE) bit
-	lmsw	%ax				# This is it!
-	jmp	flush_instr
-
-flush_instr:
-	xorw	%bx, %bx			# Flag to indicate a boot
-	xorl	%esi, %esi			# Pointer to real-mode code
-	movw	%cs, %si
-	subw	$DELTA_INITSEG, %si
-	shll	$4, %esi			# Convert to 32-bit pointer
-
-# jump to startup_32 in arch/i386/boot/compressed/head.S
-#	
-# NOTE: For high loaded big kernels we need a
-#	jmpi    0x100000,__BOOT_CS
-#
-#	but we yet haven't reloaded the CS register, so the default size 
-#	of the target offset still is 16 bit.
-#	However, using an operand prefix (0x66), the CPU will properly
-#	take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
-#	Manual, Mixing 16-bit and 32-bit code, page 16-6)
-
-	.byte 0x66, 0xea			# prefix + jmpi-opcode
-code32:	.long	startup_32			# will be set to %cs+startup_32
-	.word	__BOOT_CS
-.code32
-startup_32:
-	movl $(__BOOT_DS), %eax
-	movl %eax, %ds
-	movl %eax, %es
-	movl %eax, %fs
-	movl %eax, %gs
-	movl %eax, %ss
-
-	xorl %eax, %eax
-1:	incl %eax				# check that A20 really IS enabled
-	movl %eax, 0x00000000			# loop forever if it isn't
-	cmpl %eax, 0x00100000
-	je 1b
-
-	# Jump to the 32bit entry point
-	jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi)
-.code16
-
-# Here's a bunch of information about your current kernel..
-kernel_version:	.ascii	UTS_RELEASE
-		.ascii	" ("
-		.ascii	LINUX_COMPILE_BY
-		.ascii	"@"
-		.ascii	LINUX_COMPILE_HOST
-		.ascii	") "
-		.ascii	UTS_VERSION
-		.byte	0
-
-# This is the default real mode switch routine.
-# to be called just before protected mode transition
-default_switch:
-	cli					# no interrupts allowed !
-	movb	$0x80, %al			# disable NMI for bootup
-						# sequence
-	outb	%al, $0x70
-	lret
-
-
-#ifndef CONFIG_X86_VOYAGER
-# This routine tests whether or not A20 is enabled.  If so, it
-# exits with zf = 0.
-#
-# The memory address used, 0x200, is the int $0x80 vector, which
-# should be safe.
-
-A20_TEST_ADDR = 4*0x80
-
-a20_test:
-	pushw	%cx
-	pushw	%ax
-	xorw	%cx, %cx
-	movw	%cx, %fs			# Low memory
-	decw	%cx
-	movw	%cx, %gs			# High memory area
-	movw	$A20_TEST_LOOPS, %cx
-	movw	%fs:(A20_TEST_ADDR), %ax
-	pushw	%ax
-a20_test_wait:
-	incw	%ax
-	movw	%ax, %fs:(A20_TEST_ADDR)
-	call	delay				# Serialize and make delay constant
-	cmpw	%gs:(A20_TEST_ADDR+0x10), %ax
-	loope	a20_test_wait
-
-	popw	%fs:(A20_TEST_ADDR)
-	popw	%ax
-	popw	%cx
-	ret	
-
-#endif /* CONFIG_X86_VOYAGER */
-
-# This routine checks that the keyboard command queue is empty
-# (after emptying the output buffers)
-#
-# Some machines have delusions that the keyboard buffer is always full
-# with no keyboard attached...
-#
-# If there is no keyboard controller, we will usually get 0xff
-# to all the reads.  With each IO taking a microsecond and
-# a timeout of 100,000 iterations, this can take about half a
-# second ("delay" == outb to port 0x80). That should be ok,
-# and should also be plenty of time for a real keyboard controller
-# to empty.
-#
-
-empty_8042:
-	pushl	%ecx
-	movl	$100000, %ecx
-
-empty_8042_loop:
-	decl	%ecx
-	jz	empty_8042_end_loop
-
-	call	delay
-
-	inb	$0x64, %al			# 8042 status port
-	testb	$1, %al				# output buffer?
-	jz	no_output
-
-	call	delay
-	inb	$0x60, %al			# read it
-	jmp	empty_8042_loop
-
-no_output:
-	testb	$2, %al				# is input buffer full?
-	jnz	empty_8042_loop			# yes - loop
-empty_8042_end_loop:
-	popl	%ecx
-	ret
-
-# Read the cmos clock. Return the seconds in al
-gettime:
-	pushw	%cx
-	movb	$0x02, %ah
-	int	$0x1a
-	movb	%dh, %al			# %dh contains the seconds
-	andb	$0x0f, %al
-	movb	%dh, %ah
-	movb	$0x04, %cl
-	shrb	%cl, %ah
-	aad
-	popw	%cx
-	ret
-
-# Delay is needed after doing I/O
-delay:
-	outb	%al,$0x80
-	ret
-
-# Descriptor tables
-#
-# NOTE: The intel manual says gdt should be sixteen bytes aligned for
-# efficiency reasons.  However, there are machines which are known not
-# to boot with misaligned GDTs, so alter this at your peril!  If you alter
-# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
-# empty GDT entries (one for NULL and one reserved).
-#
-# NOTE:	On some CPUs, the GDT must be 8 byte aligned.  This is
-# true for the Voyager Quad CPU card which will not boot without
-# This directive.  16 byte aligment is recommended by intel.
-#
-	.align 16
-gdt:
-	.fill GDT_ENTRY_BOOT_CS,8,0
-
-	.word	0xFFFF				# 4Gb - (0x100000*0x1000 = 4Gb)
-	.word	0				# base address = 0
-	.word	0x9A00				# code read/exec
-	.word	0x00CF				# granularity = 4096, 386
-						#  (+5th nibble of limit)
-
-	.word	0xFFFF				# 4Gb - (0x100000*0x1000 = 4Gb)
-	.word	0				# base address = 0
-	.word	0x9200				# data read/write
-	.word	0x00CF				# granularity = 4096, 386
-						#  (+5th nibble of limit)
-gdt_end:
-	.align	4
-	
-	.word	0				# alignment byte
-idt_48:
-	.word	0				# idt limit = 0
-	.word	0, 0				# idt base = 0L
-
-	.word	0				# alignment byte
-gdt_48:
-	.word	gdt_end - gdt - 1		# gdt limit
-	.word	0, 0				# gdt base (filled in later)
-
-# Include video setup & detection code
-
-#include "video.S"
-
-# Setup signature -- must be last
-setup_sig1:	.word	SIG1
-setup_sig2:	.word	SIG2
-
-# After this point, there is some free space which is used by the video mode
-# handling code to store the temporary mode table (not used by the kernel).
-
-modelist:
-
-.text
-endtext:
-.data
-enddata:
-.bss
-endbss:
diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S
deleted file mode 100644
index 8143c9516cb4..000000000000
--- a/arch/i386/boot/video.S
+++ /dev/null
@@ -1,2043 +0,0 @@
-/*	video.S
- *
- *	Display adapter & video mode setup, version 2.13 (14-May-99)
- *
- *	Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz>
- *	Based on the original setup.S code (C) Linus Torvalds and Mats Anderson
- *
- *	Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999
- *
- *	For further information, look at Documentation/svga.txt.
- *
- */
-
-/* Enable autodetection of SVGA adapters and modes. */
-#undef CONFIG_VIDEO_SVGA
-
-/* Enable autodetection of VESA modes */
-#define CONFIG_VIDEO_VESA
-
-/* Enable compacting of mode table */
-#define CONFIG_VIDEO_COMPACT
-
-/* Retain screen contents when switching modes */
-#define CONFIG_VIDEO_RETAIN
-
-/* Enable local mode list */
-#undef CONFIG_VIDEO_LOCAL
-
-/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
-#undef CONFIG_VIDEO_400_HACK
-
-/* Hack that lets you force specific BIOS mode ID and specific dimensions */
-#undef CONFIG_VIDEO_GFX_HACK
-#define VIDEO_GFX_BIOS_AX 0x4f02	/* 800x600 on ThinkPad */
-#define VIDEO_GFX_BIOS_BX 0x0102
-#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425	/* 100x37 */
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- *	NORMAL_VGA (-1)
- *	EXTENDED_VGA (-2)
- *	ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-/* Special video modes */
-#define VIDEO_FIRST_SPECIAL 0x0f00
-#define VIDEO_80x25 0x0f00
-#define VIDEO_8POINT 0x0f01
-#define VIDEO_80x43 0x0f02
-#define VIDEO_80x28 0x0f03
-#define VIDEO_CURRENT_MODE 0x0f04
-#define VIDEO_80x30 0x0f05
-#define VIDEO_80x34 0x0f06
-#define VIDEO_80x60 0x0f07
-#define VIDEO_GFX_HACK 0x0f08
-#define VIDEO_LAST_SPECIAL 0x0f09
-
-/* Video modes given by resolution */
-#define VIDEO_FIRST_RESOLUTION 0x1000
-
-/* The "recalculate timings" flag */
-#define VIDEO_RECALC 0x8000
-
-/* Positions of various video parameters passed to the kernel */
-/* (see also include/linux/tty.h) */
-#define PARAM_CURSOR_POS	0x00
-#define PARAM_VIDEO_PAGE	0x04
-#define PARAM_VIDEO_MODE	0x06
-#define PARAM_VIDEO_COLS	0x07
-#define PARAM_VIDEO_EGA_BX	0x0a
-#define PARAM_VIDEO_LINES	0x0e
-#define PARAM_HAVE_VGA		0x0f
-#define PARAM_FONT_POINTS	0x10
-
-#define PARAM_LFB_WIDTH		0x12
-#define PARAM_LFB_HEIGHT	0x14
-#define PARAM_LFB_DEPTH		0x16
-#define PARAM_LFB_BASE		0x18
-#define PARAM_LFB_SIZE		0x1c
-#define PARAM_LFB_LINELENGTH	0x24
-#define PARAM_LFB_COLORS	0x26
-#define PARAM_VESAPM_SEG	0x2e
-#define PARAM_VESAPM_OFF	0x30
-#define PARAM_LFB_PAGES		0x32
-#define PARAM_VESA_ATTRIB	0x34
-#define PARAM_CAPABILITIES	0x36
-
-/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
-#ifdef CONFIG_VIDEO_RETAIN
-#define DO_STORE call store_screen
-#else
-#define DO_STORE
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# This is the main entry point called by setup.S
-# %ds *must* be pointing to the bootsector
-video:	pushw	%ds		# We use different segments
-	pushw	%ds		# FS contains original DS
-	popw	%fs
-	pushw	%cs		# DS is equal to CS
-	popw	%ds
-	pushw	%cs		# ES is equal to CS
-	popw	%es
-	xorw	%ax, %ax
-	movw	%ax, %gs	# GS is zero
-	cld
-	call	basic_detect	# Basic adapter type testing (EGA/VGA/MDA/CGA)
-#ifdef CONFIG_VIDEO_SELECT
-	movw	%fs:(0x01fa), %ax		# User selected video mode
-	cmpw	$ASK_VGA, %ax			# Bring up the menu
-	jz	vid2
-
-	call	mode_set			# Set the mode
-	jc	vid1
-
-	leaw	badmdt, %si			# Invalid mode ID
-	call	prtstr
-vid2:	call	mode_menu
-vid1:
-#ifdef CONFIG_VIDEO_RETAIN
-	call	restore_screen			# Restore screen contents
-#endif /* CONFIG_VIDEO_RETAIN */
-	call	store_edid
-#endif /* CONFIG_VIDEO_SELECT */
-	call	mode_params			# Store mode parameters
-	popw	%ds				# Restore original DS
-	ret
-
-# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel.
-basic_detect:
-	movb	$0, %fs:(PARAM_HAVE_VGA)
-	movb	$0x12, %ah	# Check EGA/VGA
-	movb	$0x10, %bl
-	int	$0x10
-	movw	%bx, %fs:(PARAM_VIDEO_EGA_BX)	# Identifies EGA to the kernel
-	cmpb	$0x10, %bl			# No, it's a CGA/MDA/HGA card.
-	je	basret
-
-	incb	adapter
-	movw	$0x1a00, %ax			# Check EGA or VGA?
-	int	$0x10
-	cmpb	$0x1a, %al			# 1a means VGA...
-	jne	basret				# anything else is EGA.
-	
-	incb	%fs:(PARAM_HAVE_VGA)		# We've detected a VGA
-	incb	adapter
-basret:	ret
-
-# Store the video mode parameters for later usage by the kernel.
-# This is done by asking the BIOS except for the rows/columns
-# parameters in the default 80x25 mode -- these are set directly,
-# because some very obscure BIOSes supply insane values.
-mode_params:
-#ifdef CONFIG_VIDEO_SELECT
-	cmpb	$0, graphic_mode
-	jnz	mopar_gr
-#endif
-	movb	$0x03, %ah			# Read cursor position
-	xorb	%bh, %bh
-	int	$0x10
-	movw	%dx, %fs:(PARAM_CURSOR_POS)
-	movb	$0x0f, %ah			# Read page/mode/width
-	int	$0x10
-	movw	%bx, %fs:(PARAM_VIDEO_PAGE)
-	movw	%ax, %fs:(PARAM_VIDEO_MODE)	# Video mode and screen width
-	cmpb	$0x7, %al			# MDA/HGA => segment differs
-	jnz	mopar0
-
-	movw	$0xb000, video_segment
-mopar0: movw	%gs:(0x485), %ax		# Font size
-	movw	%ax, %fs:(PARAM_FONT_POINTS)	# (valid only on EGA/VGA)
-	movw	force_size, %ax			# Forced size?
-	orw	%ax, %ax
-	jz	mopar1
-
-	movb	%ah, %fs:(PARAM_VIDEO_COLS)
-	movb	%al, %fs:(PARAM_VIDEO_LINES)
-	ret
-
-mopar1:	movb	$25, %al
-	cmpb	$0, adapter			# If we are on CGA/MDA/HGA, the
-	jz	mopar2				# screen must have 25 lines.
-
-	movb	%gs:(0x484), %al		# On EGA/VGA, use the EGA+ BIOS
-	incb	%al				# location of max lines.
-mopar2: movb	%al, %fs:(PARAM_VIDEO_LINES)
-	ret
-
-#ifdef CONFIG_VIDEO_SELECT
-# Fetching of VESA frame buffer parameters
-mopar_gr:
-	leaw	modelist+1024, %di
-	movb	$0x23, %fs:(PARAM_HAVE_VGA)
-	movw	16(%di), %ax
-	movw	%ax, %fs:(PARAM_LFB_LINELENGTH)
-	movw	18(%di), %ax
-	movw	%ax, %fs:(PARAM_LFB_WIDTH)
-	movw	20(%di), %ax
-	movw	%ax, %fs:(PARAM_LFB_HEIGHT)
-	movb	25(%di), %al
-	movb	$0, %ah
-	movw	%ax, %fs:(PARAM_LFB_DEPTH)
-	movb	29(%di), %al	
-	movb	$0, %ah
-	movw	%ax, %fs:(PARAM_LFB_PAGES)
-	movl	40(%di), %eax
-	movl	%eax, %fs:(PARAM_LFB_BASE)
-	movl	31(%di), %eax
-	movl	%eax, %fs:(PARAM_LFB_COLORS)
-	movl	35(%di), %eax
-	movl	%eax, %fs:(PARAM_LFB_COLORS+4)
-	movw	0(%di), %ax
-	movw	%ax, %fs:(PARAM_VESA_ATTRIB)
-
-# get video mem size
-	leaw	modelist+1024, %di
-	movw	$0x4f00, %ax
-	int	$0x10
-	xorl	%eax, %eax
-	movw	18(%di), %ax
-	movl	%eax, %fs:(PARAM_LFB_SIZE)
-
-# store mode capabilities
-	movl 10(%di), %eax
-	movl %eax, %fs:(PARAM_CAPABILITIES)
-
-# switching the DAC to 8-bit is for <= 8 bpp only
-	movw	%fs:(PARAM_LFB_DEPTH), %ax
-	cmpw	$8, %ax
-	jg	dac_done
-
-# get DAC switching capability
-	xorl	%eax, %eax
-	movb	10(%di), %al
-	testb	$1, %al
-	jz	dac_set
-
-# attempt to switch DAC to 8-bit
-	movw	$0x4f08, %ax
-	movw	$0x0800, %bx
-	int	$0x10
-	cmpw	$0x004f, %ax
-	jne     dac_set
-	movb    %bh, dac_size		# store actual DAC size
-
-dac_set:
-# set color size to DAC size
-	movb	dac_size, %al
-	movb	%al, %fs:(PARAM_LFB_COLORS+0)
-	movb	%al, %fs:(PARAM_LFB_COLORS+2)
-	movb	%al, %fs:(PARAM_LFB_COLORS+4)
-	movb	%al, %fs:(PARAM_LFB_COLORS+6)
-
-# set color offsets to 0
-	movb	$0, %fs:(PARAM_LFB_COLORS+1)
-	movb	$0, %fs:(PARAM_LFB_COLORS+3)
-	movb	$0, %fs:(PARAM_LFB_COLORS+5)
-	movb	$0, %fs:(PARAM_LFB_COLORS+7)
-
-dac_done:
-# get protected mode interface informations
-	movw	$0x4f0a, %ax
-	xorw	%bx, %bx
-	xorw	%di, %di
-	int	$0x10
-	cmp	$0x004f, %ax
-	jnz	no_pm
-
-	movw	%es, %fs:(PARAM_VESAPM_SEG)
-	movw	%di, %fs:(PARAM_VESAPM_OFF)
-no_pm:	ret
-
-# The video mode menu
-mode_menu:
-	leaw	keymsg, %si			# "Return/Space/Timeout" message
-	call	prtstr
-	call	flush
-nokey:	call	getkt
-
-	cmpb	$0x0d, %al			# ENTER ?
-	je	listm				# yes - manual mode selection
-
-	cmpb	$0x20, %al			# SPACE ?
-	je	defmd1				# no - repeat
-
-	call 	beep
-	jmp	nokey
-
-defmd1:	ret					# No mode chosen? Default 80x25
-
-listm:	call	mode_table			# List mode table
-listm0:	leaw	name_bann, %si			# Print adapter name
-	call	prtstr
-	movw	card_name, %si
-	orw	%si, %si
-	jnz	an2
-
-	movb	adapter, %al
-	leaw	old_name, %si
-	orb	%al, %al
-	jz	an1
-
-	leaw	ega_name, %si
-	decb	%al
-	jz	an1
-
-	leaw	vga_name, %si
-	jmp	an1
-
-an2:	call	prtstr
-	leaw	svga_name, %si
-an1:	call	prtstr
-	leaw	listhdr, %si			# Table header
-	call	prtstr
-	movb	$0x30, %dl			# DL holds mode number
-	leaw	modelist, %si
-lm1:	cmpw	$ASK_VGA, (%si)			# End?
-	jz	lm2
-
-	movb	%dl, %al			# Menu selection number
-	call	prtchr
-	call	prtsp2
-	lodsw
-	call	prthw				# Mode ID
-	call	prtsp2
-	movb	0x1(%si), %al
-	call	prtdec				# Rows
-	movb	$0x78, %al			# the letter 'x'
-	call	prtchr
-	lodsw
-	call	prtdec				# Columns
-	movb	$0x0d, %al			# New line
-	call	prtchr
-	movb	$0x0a, %al
-	call	prtchr
-	incb	%dl				# Next character
-	cmpb	$0x3a, %dl
-	jnz	lm1
-
-	movb	$0x61, %dl
-	jmp	lm1
-
-lm2:	leaw	prompt, %si			# Mode prompt
-	call	prtstr
-	leaw	edit_buf, %di			# Editor buffer
-lm3:	call	getkey
-	cmpb	$0x0d, %al			# Enter?
-	jz	lment
-
-	cmpb	$0x08, %al			# Backspace?
-	jz	lmbs
-
-	cmpb	$0x20, %al			# Printable?
-	jc	lm3
-
-	cmpw	$edit_buf+4, %di		# Enough space?
-	jz	lm3
-
-	stosb
-	call	prtchr
-	jmp	lm3
-
-lmbs:	cmpw	$edit_buf, %di			# Backspace
-	jz	lm3
-
-	decw	%di
-	movb	$0x08, %al
-	call	prtchr
-	call	prtspc
-	movb	$0x08, %al
-	call	prtchr
-	jmp	lm3
-	
-lment:	movb	$0, (%di)
-	leaw	crlft, %si
-	call	prtstr
-	leaw	edit_buf, %si
-	cmpb	$0, (%si)			# Empty string = default mode
-	jz	lmdef
-
-	cmpb	$0, 1(%si)			# One character = menu selection
-	jz	mnusel
-
-	cmpw	$0x6373, (%si)			# "scan" => mode scanning
-	jnz	lmhx
-
-	cmpw	$0x6e61, 2(%si)
-	jz	lmscan
-
-lmhx:	xorw	%bx, %bx			# Else => mode ID in hex
-lmhex:	lodsb
-	orb	%al, %al
-	jz	lmuse1
-
-	subb	$0x30, %al
-	jc	lmbad
-
-	cmpb	$10, %al
-	jc	lmhx1
-
-	subb	$7, %al
-	andb	$0xdf, %al
-	cmpb	$10, %al
-	jc	lmbad
-
-	cmpb	$16, %al
-	jnc	lmbad
-
-lmhx1:	shlw	$4, %bx
-	orb	%al, %bl
-	jmp	lmhex
-
-lmuse1:	movw	%bx, %ax
-	jmp	lmuse
-
-mnusel:	lodsb					# Menu selection
-	xorb	%ah, %ah
-	subb	$0x30, %al
-	jc	lmbad
-
-	cmpb	$10, %al
-	jc	lmuse
-	
-	cmpb	$0x61-0x30, %al
-	jc	lmbad
-	
-	subb	$0x61-0x30-10, %al
-	cmpb	$36, %al
-	jnc	lmbad
-
-lmuse:	call	mode_set
-	jc	lmdef
-
-lmbad:	leaw	unknt, %si
-	call	prtstr
-	jmp	lm2
-lmscan:	cmpb	$0, adapter			# Scanning only on EGA/VGA
-	jz	lmbad
-
-	movw	$0, mt_end			# Scanning of modes is
-	movb	$1, scanning			# done as new autodetection.
-	call	mode_table
-	jmp	listm0
-lmdef:	ret
-
-# Additional parts of mode_set... (relative jumps, you know)
-setv7:						# Video7 extended modes
-	DO_STORE
-	subb	$VIDEO_FIRST_V7>>8, %bh
-	movw	$0x6f05, %ax
-	int	$0x10
-	stc
-	ret
-
-_setrec:	jmp	setrec			# Ugly...
-_set_80x25:	jmp	set_80x25
-
-# Aliases for backward compatibility.
-setalias:
-	movw	$VIDEO_80x25, %ax
-	incw	%bx
-	jz	mode_set
-
-	movb	$VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al
-	incw	%bx
-	jnz	setbad				# Fall-through!
-
-# Setting of user mode (AX=mode ID) => CF=success
-mode_set:
-	movw	%ax, %fs:(0x01fa)		# Store mode for use in acpi_wakeup.S
-	movw	%ax, %bx
-	cmpb	$0xff, %ah
-	jz	setalias
-
-	testb	$VIDEO_RECALC>>8, %ah
-	jnz	_setrec
-
-	cmpb	$VIDEO_FIRST_RESOLUTION>>8, %ah
-	jnc	setres
-	
-	cmpb	$VIDEO_FIRST_SPECIAL>>8, %ah
-	jz	setspc
-	
-	cmpb	$VIDEO_FIRST_V7>>8, %ah
-	jz	setv7
-	
-	cmpb	$VIDEO_FIRST_VESA>>8, %ah
-	jnc	check_vesa
-	
-	orb	%ah, %ah
-	jz	setmenu
-	
-	decb	%ah
-	jz	setbios
-
-setbad:	clc
-	movb	$0, do_restore			# The screen needn't be restored
-	ret
-
-setvesa:
-	DO_STORE
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	movw	$0x4f02, %ax			# VESA BIOS mode set call
-	int	$0x10
-	cmpw	$0x004f, %ax			# AL=4f if implemented
-	jnz	setbad				# AH=0 if OK
-
-	stc
-	ret
-
-setbios:
-	DO_STORE
-	int	$0x10				# Standard BIOS mode set call
-	pushw	%bx
-	movb	$0x0f, %ah			# Check if really set
-	int	$0x10
-	popw	%bx
-	cmpb	%bl, %al
-	jnz	setbad
-	
-	stc
-	ret
-
-setspc:	xorb	%bh, %bh			# Set special mode
-	cmpb	$VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl
-	jnc	setbad
-	
-	addw	%bx, %bx
-	jmp	*spec_inits(%bx)
-
-setmenu:
-	orb	%al, %al			# 80x25 is an exception
-	jz	_set_80x25
-	
-	pushw	%bx				# Set mode chosen from menu
-	call	mode_table			# Build the mode table
-	popw	%ax
-	shlw	$2, %ax
-	addw	%ax, %si
-	cmpw	%di, %si
-	jnc	setbad
-	
-	movw	(%si), %ax			# Fetch mode ID
-_m_s:	jmp	mode_set
-
-setres:	pushw	%bx				# Set mode chosen by resolution
-	call	mode_table
-	popw	%bx
-	xchgb	%bl, %bh
-setr1:	lodsw
-	cmpw	$ASK_VGA, %ax			# End of the list?
-	jz	setbad
-	
-	lodsw
-	cmpw	%bx, %ax
-	jnz	setr1
-	
-	movw	-4(%si), %ax			# Fetch mode ID
-	jmp	_m_s
-
-check_vesa:
-#ifdef CONFIG_FIRMWARE_EDID
-	leaw	modelist+1024, %di
-	movw	$0x4f00, %ax
-	int	$0x10
-	cmpw	$0x004f, %ax
-	jnz	setbad
-
-	movw	4(%di), %ax
-	movw	%ax, vbe_version
-#endif
-	leaw	modelist+1024, %di
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	movw	%bx, %cx			# Get mode information structure
-	movw	$0x4f01, %ax
-	int	$0x10
-	addb	$VIDEO_FIRST_VESA>>8, %bh
-	cmpw	$0x004f, %ax
-	jnz	setbad
-
-	movb	(%di), %al			# Check capabilities.
-	andb	$0x19, %al
-	cmpb	$0x09, %al
-	jz	setvesa				# This is a text mode
-
-	movb	(%di), %al			# Check capabilities.
-	andb	$0x99, %al
-	cmpb	$0x99, %al
-	jnz	_setbad				# Doh! No linear frame buffer.
-
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	orw	$0x4000, %bx			# Use linear frame buffer
-	movw	$0x4f02, %ax			# VESA BIOS mode set call
-	int	$0x10
-	cmpw	$0x004f, %ax			# AL=4f if implemented
-	jnz	_setbad				# AH=0 if OK
-
-	movb	$1, graphic_mode		# flag graphic mode
-	movb	$0, do_restore			# no screen restore
-	stc
-	ret
-
-_setbad:	jmp	setbad          	# Ugly...
-
-# Recalculate vertical display end registers -- this fixes various
-# inconsistencies of extended modes on many adapters. Called when
-# the VIDEO_RECALC flag is set in the mode ID.
-
-setrec:	subb	$VIDEO_RECALC>>8, %ah		# Set the base mode
-	call	mode_set
-	jnc	rct3
-
-	movw	%gs:(0x485), %ax		# Font size in pixels
-	movb	%gs:(0x484), %bl		# Number of rows
-	incb	%bl
-	mulb	%bl				# Number of visible
-	decw	%ax				# scan lines - 1
-	movw	$0x3d4, %dx
-	movw	%ax, %bx
-	movb	$0x12, %al			# Lower 8 bits
-	movb	%bl, %ah
-	outw	%ax, %dx
-	movb	$0x07, %al		# Bits 8 and 9 in the overflow register
-	call	inidx
-	xchgb	%al, %ah
-	andb	$0xbd, %ah
-	shrb	%bh
-	jnc	rct1
-	orb	$0x02, %ah
-rct1:	shrb	%bh
-	jnc	rct2
-	orb	$0x40, %ah
-rct2:	movb	$0x07, %al
-	outw	%ax, %dx
-	stc
-rct3:	ret
-
-# Table of routines for setting of the special modes.
-spec_inits:
-	.word	set_80x25
-	.word	set_8pixel
-	.word	set_80x43
-	.word	set_80x28
-	.word	set_current
-	.word	set_80x30
-	.word	set_80x34
-	.word	set_80x60
-	.word	set_gfx
-
-# Set the 80x25 mode. If already set, do nothing.
-set_80x25:
-	movw	$0x5019, force_size		# Override possibly broken BIOS
-use_80x25:
-#ifdef CONFIG_VIDEO_400_HACK
-	movw	$0x1202, %ax			# Force 400 scan lines
-	movb	$0x30, %bl
-	int	$0x10
-#else
-	movb	$0x0f, %ah			# Get current mode ID
-	int	$0x10
-	cmpw	$0x5007, %ax	# Mode 7 (80x25 mono) is the only one available
-	jz	st80		# on CGA/MDA/HGA and is also available on EGAM
-
-	cmpw	$0x5003, %ax	# Unknown mode, force 80x25 color
-	jnz	force3
-
-st80:	cmpb	$0, adapter	# CGA/MDA/HGA => mode 3/7 is always 80x25
-	jz	set80
-
-	movb	%gs:(0x0484), %al	# This is EGA+ -- beware of 80x50 etc.
-	orb	%al, %al		# Some buggy BIOS'es set 0 rows
-	jz	set80
-	
-	cmpb	$24, %al		# It's hopefully correct
-	jz	set80
-#endif /* CONFIG_VIDEO_400_HACK */
-force3:	DO_STORE
-	movw	$0x0003, %ax			# Forced set
-	int	$0x10
-set80:	stc
-	ret
-
-# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls.
-set_8pixel:
-	DO_STORE
-	call	use_80x25			# The base is 80x25
-set_8pt:
-	movw	$0x1112, %ax			# Use 8x8 font
-	xorb	%bl, %bl
-	int	$0x10
-	movw	$0x1200, %ax			# Use alternate print screen
-	movb	$0x20, %bl
-	int	$0x10
-	movw	$0x1201, %ax			# Turn off cursor emulation
-	movb	$0x34, %bl
-	int	$0x10
-	movb	$0x01, %ah			# Define cursor scan lines 6-7
-	movw	$0x0607, %cx
-	int	$0x10
-set_current:
-	stc
-	ret
-
-# Set the 80x28 mode. This mode works on all VGA's, because it's a standard
-# 80x25 mode with 14-point fonts instead of 16-point.
-set_80x28:
-	DO_STORE
-	call	use_80x25			# The base is 80x25
-set14:	movw	$0x1111, %ax			# Use 9x14 font
-	xorb	%bl, %bl
-	int	$0x10
-	movb	$0x01, %ah			# Define cursor scan lines 11-12
-	movw	$0x0b0c, %cx
-	int	$0x10
-	stc
-	ret
-
-# Set the 80x43 mode. This mode is works on all VGA's.
-# It's a 350-scanline mode with 8-pixel font.
-set_80x43:
-	DO_STORE
-	movw	$0x1201, %ax			# Set 350 scans
-	movb	$0x30, %bl
-	int	$0x10
-	movw	$0x0003, %ax			# Reset video mode
-	int	$0x10
-	jmp	set_8pt				# Use 8-pixel font
-
-# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font.
-set_80x30:
-	call	use_80x25			# Start with real 80x25
-	DO_STORE
-	movw	$0x3cc, %dx			# Get CRTC port
-	inb	%dx, %al
-	movb	$0xd4, %dl
-	rorb	%al				# Mono or color?
-	jc	set48a
-
-	movb	$0xb4, %dl
-set48a:	movw	$0x0c11, %ax		# Vertical sync end (also unlocks CR0-7)
- 	call	outidx
-	movw	$0x0b06, %ax			# Vertical total
- 	call	outidx
-	movw	$0x3e07, %ax			# (Vertical) overflow
- 	call	outidx
-	movw	$0xea10, %ax			# Vertical sync start
- 	call	outidx
-	movw	$0xdf12, %ax			# Vertical display end
-	call	outidx
-	movw	$0xe715, %ax			# Vertical blank start
- 	call	outidx
-	movw	$0x0416, %ax			# Vertical blank end
- 	call	outidx
-	pushw	%dx
-	movb	$0xcc, %dl			# Misc output register (read)
- 	inb	%dx, %al
- 	movb	$0xc2, %dl			# (write)
- 	andb	$0x0d, %al	# Preserve clock select bits and color bit
- 	orb	$0xe2, %al			# Set correct sync polarity
- 	outb	%al, %dx
-	popw	%dx
-	movw	$0x501e, force_size
-	stc					# That's all.
-	ret
-
-# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font.
-set_80x34:
-	call	set_80x30			# Set 480 scans
-	call	set14				# And 14-pt font
-	movw	$0xdb12, %ax			# VGA vertical display end
-	movw	$0x5022, force_size
-setvde:	call	outidx
-	stc
-	ret
-
-# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font.
-set_80x60:
-	call	set_80x30			# Set 480 scans
-	call	set_8pt				# And 8-pt font
-	movw	$0xdf12, %ax			# VGA vertical display end
-	movw	$0x503c, force_size
-	jmp	setvde
-
-# Special hack for ThinkPad graphics
-set_gfx:
-#ifdef CONFIG_VIDEO_GFX_HACK
-	movw	$VIDEO_GFX_BIOS_AX, %ax
-	movw	$VIDEO_GFX_BIOS_BX, %bx
-	int	$0x10
-	movw	$VIDEO_GFX_DUMMY_RESOLUTION, force_size
-	stc
-#endif
-	ret
-
-#ifdef CONFIG_VIDEO_RETAIN
-
-# Store screen contents to temporary buffer.
-store_screen:
-	cmpb	$0, do_restore			# Already stored?
-	jnz	stsr
-
-	testb	$CAN_USE_HEAP, loadflags	# Have we space for storing?
-	jz	stsr
-	
-	pushw	%ax
-	pushw	%bx
-	pushw	force_size			# Don't force specific size
-	movw	$0, force_size
-	call	mode_params			# Obtain params of current mode
-	popw	force_size
-	movb	%fs:(PARAM_VIDEO_LINES), %ah
-	movb	%fs:(PARAM_VIDEO_COLS), %al
-	movw	%ax, %bx			# BX=dimensions
-	mulb	%ah
-	movw	%ax, %cx			# CX=number of characters
-	addw	%ax, %ax			# Calculate image size
-	addw	$modelist+1024+4, %ax
-	cmpw	heap_end_ptr, %ax
-	jnc	sts1				# Unfortunately, out of memory
-
-	movw	%fs:(PARAM_CURSOR_POS), %ax	# Store mode params
-	leaw	modelist+1024, %di
-	stosw
-	movw	%bx, %ax
-	stosw
-	pushw	%ds				# Store the screen
-	movw	video_segment, %ds
-	xorw	%si, %si
-	rep
-	movsw
-	popw	%ds
-	incb	do_restore			# Screen will be restored later
-sts1:	popw	%bx
-	popw	%ax
-stsr:	ret
-
-# Restore screen contents from temporary buffer.
-restore_screen:
-	cmpb	$0, do_restore			# Has the screen been stored?
-	jz	res1
-
-	call	mode_params			# Get parameters of current mode
-	movb	%fs:(PARAM_VIDEO_LINES), %cl
-	movb	%fs:(PARAM_VIDEO_COLS), %ch
-	leaw	modelist+1024, %si		# Screen buffer
-	lodsw					# Set cursor position
-	movw	%ax, %dx
-	cmpb	%cl, %dh
-	jc	res2
-	
-	movb	%cl, %dh
-	decb	%dh
-res2:	cmpb	%ch, %dl
-	jc	res3
-	
-	movb	%ch, %dl
-	decb	%dl
-res3:	movb	$0x02, %ah
-	movb	$0x00, %bh
-	int	$0x10
-	lodsw					# Display size
-	movb	%ah, %dl			# DL=number of lines
-	movb	$0, %ah				# BX=phys. length of orig. line
-	movw	%ax, %bx
-	cmpb	%cl, %dl			# Too many?
-	jc	res4
-
-	pushw	%ax
-	movb	%dl, %al
-	subb	%cl, %al
-	mulb	%bl
-	addw	%ax, %si
-	addw	%ax, %si
-	popw	%ax
-	movb	%cl, %dl
-res4:	cmpb	%ch, %al			# Too wide?
-	jc	res5
-	
-	movb	%ch, %al			# AX=width of src. line
-res5:	movb	$0, %cl
-	xchgb	%ch, %cl
-	movw	%cx, %bp			# BP=width of dest. line
-	pushw	%es
-	movw	video_segment, %es
-	xorw	%di, %di			# Move the data
-	addw	%bx, %bx			# Convert BX and BP to _bytes_
-	addw	%bp, %bp
-res6:	pushw	%si
-	pushw	%di
-	movw	%ax, %cx
-	rep
-	movsw
-	popw	%di
-	popw	%si
-	addw	%bp, %di
-	addw	%bx, %si
-	decb	%dl
-	jnz	res6
-	
-	popw	%es				# Done
-res1:	ret
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port)
-outidx:	outb	%al, %dx
-	pushw	%ax
-	movb	%ah, %al
-	incw	%dx
-	outb	%al, %dx
-	decw	%dx
-	popw	%ax
-	ret
-
-# Build the table of video modes (stored after the setup.S code at the
-# `modelist' label. Each video mode record looks like:
-#	.word	MODE-ID		(our special mode ID (see above))
-#	.byte	rows		(number of rows)
-#	.byte	columns		(number of columns)
-# Returns address of the end of the table in DI, the end is marked
-# with a ASK_VGA ID.
-mode_table:
-	movw	mt_end, %di			# Already filled?
-	orw	%di, %di
-	jnz	mtab1x
-	
-	leaw	modelist, %di			# Store standard modes:
-	movl	$VIDEO_80x25 + 0x50190000, %eax	# The 80x25 mode (ALL)
-	stosl
-	movb	adapter, %al			# CGA/MDA/HGA -- no more modes
-	orb	%al, %al
-	jz	mtabe
-	
-	decb	%al
-	jnz	mtabv
-	
-	movl	$VIDEO_8POINT + 0x502b0000, %eax	# The 80x43 EGA mode
-	stosl
-	jmp	mtabe
-
-mtab1x:	jmp	mtab1
-
-mtabv:	leaw	vga_modes, %si			# All modes for std VGA
-	movw	$vga_modes_end-vga_modes, %cx
-	rep	# I'm unable to use movsw as I don't know how to store a half
-	movsb	# of the expression above to cx without using explicit shr.
-
-	cmpb	$0, scanning			# Mode scan requested?
-	jz	mscan1
-	
-	call	mode_scan
-mscan1:
-
-#ifdef CONFIG_VIDEO_LOCAL
-	call	local_modes
-#endif /* CONFIG_VIDEO_LOCAL */
-
-#ifdef CONFIG_VIDEO_VESA
-	call	vesa_modes			# Detect VESA VGA modes
-#endif /* CONFIG_VIDEO_VESA */
-
-#ifdef CONFIG_VIDEO_SVGA
-	cmpb	$0, scanning			# Bypass when scanning
-	jnz	mscan2
-	
-	call	svga_modes			# Detect SVGA cards & modes
-mscan2:
-#endif /* CONFIG_VIDEO_SVGA */
-
-mtabe:
-
-#ifdef CONFIG_VIDEO_COMPACT
-	leaw	modelist, %si
-	movw	%di, %dx
-	movw	%si, %di
-cmt1:	cmpw	%dx, %si			# Scan all modes
-	jz	cmt2
-
-	leaw	modelist, %bx			# Find in previous entries
-	movw	2(%si), %cx
-cmt3:	cmpw	%bx, %si
-	jz	cmt4
-
-	cmpw	2(%bx), %cx			# Found => don't copy this entry
-	jz	cmt5
-
-	addw	$4, %bx
-	jmp	cmt3
-
-cmt4:	movsl					# Copy entry
-	jmp	cmt1
-
-cmt5:	addw	$4, %si				# Skip entry
-	jmp	cmt1
-
-cmt2:
-#endif	/* CONFIG_VIDEO_COMPACT */
-
-	movw	$ASK_VGA, (%di)			# End marker
-	movw	%di, mt_end
-mtab1:	leaw	modelist, %si			# SI=mode list, DI=list end
-ret0:	ret
-
-# Modes usable on all standard VGAs
-vga_modes:
-	.word	VIDEO_8POINT
-	.word	0x5032				# 80x50
-	.word	VIDEO_80x43
-	.word	0x502b				# 80x43
-	.word	VIDEO_80x28
-	.word	0x501c				# 80x28
-	.word	VIDEO_80x30
-	.word	0x501e				# 80x30
-	.word	VIDEO_80x34
-	.word	0x5022				# 80x34
-	.word	VIDEO_80x60
-	.word	0x503c				# 80x60
-#ifdef CONFIG_VIDEO_GFX_HACK
-	.word	VIDEO_GFX_HACK
-	.word	VIDEO_GFX_DUMMY_RESOLUTION
-#endif
-
-vga_modes_end:
-# Detect VESA modes.
-
-#ifdef CONFIG_VIDEO_VESA
-vesa_modes:
-	cmpb	$2, adapter			# VGA only
-	jnz	ret0
-
-	movw	%di, %bp			# BP=original mode table end
-	addw	$0x200, %di			# Buffer space
-	movw	$0x4f00, %ax			# VESA Get card info call
-	int	$0x10
-	movw	%bp, %di
-	cmpw	$0x004f, %ax			# Successful?
-	jnz	ret0
-	
-	cmpw	$0x4556, 0x200(%di)
-	jnz	ret0
-	
-	cmpw	$0x4153, 0x202(%di)
-	jnz	ret0
-	
-	movw	$vesa_name, card_name		# Set name to "VESA VGA"
-	pushw	%gs
-	lgsw	0x20e(%di), %si			# GS:SI=mode list
-	movw	$128, %cx			# Iteration limit
-vesa1:
-# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst.
-# XXX:	lodsw	%gs:(%si), %ax			# Get next mode in the list
-	gs; lodsw
-	cmpw	$0xffff, %ax			# End of the table?
-	jz	vesar
-	
-	cmpw	$0x0080, %ax			# Check validity of mode ID
-	jc	vesa2
-	
-	orb	%ah, %ah		# Valid IDs: 0x0000-0x007f/0x0100-0x07ff
-	jz	vesan			# Certain BIOSes report 0x80-0xff!
-
-	cmpw	$0x0800, %ax
-	jnc	vesae
-
-vesa2:	pushw	%cx
-	movw	%ax, %cx			# Get mode information structure
-	movw	$0x4f01, %ax
-	int	$0x10
-	movw	%cx, %bx			# BX=mode number
-	addb	$VIDEO_FIRST_VESA>>8, %bh
-	popw	%cx
-	cmpw	$0x004f, %ax
-	jnz	vesan			# Don't report errors (buggy BIOSES)
-
-	movb	(%di), %al			# Check capabilities. We require
-	andb	$0x19, %al			# a color text mode.
-	cmpb	$0x09, %al
-	jnz	vesan
-	
-	cmpw	$0xb800, 8(%di)		# Standard video memory address required
-	jnz	vesan
-
-	testb	$2, (%di)			# Mode characteristics supplied?
-	movw	%bx, (%di)			# Store mode number
-	jz	vesa3
-	
-	xorw	%dx, %dx
-	movw	0x12(%di), %bx			# Width
-	orb	%bh, %bh
-	jnz	vesan
-	
-	movb	%bl, 0x3(%di)
-	movw	0x14(%di), %ax			# Height
-	orb	%ah, %ah
-	jnz	vesan
-	
-	movb	%al, 2(%di)
-	mulb	%bl
-	cmpw	$8193, %ax		# Small enough for Linux console driver?
-	jnc	vesan
-
-	jmp	vesaok
-
-vesa3:	subw	$0x8108, %bx	# This mode has no detailed info specified,
-	jc	vesan		# so it must be a standard VESA mode.
-
-	cmpw	$5, %bx
-	jnc	vesan
-
-	movw	vesa_text_mode_table(%bx), %ax
-	movw	%ax, 2(%di)
-vesaok:	addw	$4, %di				# The mode is valid. Store it.
-vesan:	loop	vesa1			# Next mode. Limit exceeded => error
-vesae:	leaw	vesaer, %si
-	call	prtstr
-	movw	%bp, %di			# Discard already found modes.
-vesar:	popw	%gs
-	ret
-
-# Dimensions of standard VESA text modes
-vesa_text_mode_table:
-	.byte	60, 80				# 0108
-	.byte	25, 132				# 0109
-	.byte	43, 132				# 010A
-	.byte	50, 132				# 010B
-	.byte	60, 132				# 010C
-#endif	/* CONFIG_VIDEO_VESA */
-
-# Scan for video modes. A bit dirty, but should work.
-mode_scan:
-	movw	$0x0100, %cx			# Start with mode 0
-scm1:	movb	$0, %ah				# Test the mode
-	movb	%cl, %al
-	int	$0x10
-	movb	$0x0f, %ah
-	int	$0x10
-	cmpb	%cl, %al
-	jnz	scm2				# Mode not set
-
-	movw	$0x3c0, %dx			# Test if it's a text mode
-	movb	$0x10, %al			# Mode bits
-	call	inidx
-	andb	$0x03, %al
-	jnz	scm2
-	
-	movb	$0xce, %dl			# Another set of mode bits
-	movb	$0x06, %al
-	call	inidx
-	shrb	%al
-	jc	scm2
-	
-	movb	$0xd4, %dl			# Cursor location
-	movb	$0x0f, %al
-	call	inidx
-	orb	%al, %al
-	jnz	scm2
-	
-	movw	%cx, %ax			# Ok, store the mode
-	stosw
-	movb	%gs:(0x484), %al		# Number of rows
-	incb	%al
-	stosb
-	movw	%gs:(0x44a), %ax		# Number of columns
-	stosb
-scm2:	incb	%cl
-	jns	scm1
-	
-	movw	$0x0003, %ax			# Return back to mode 3
-	int	$0x10
-	ret
-
-tstidx:	outw	%ax, %dx			# OUT DX,AX and inidx
-inidx:	outb	%al, %dx			# Read from indexed VGA register
-	incw	%dx			# AL=index, DX=index reg port -> AL=data
-	inb	%dx, %al
-	decw	%dx
-	ret
-
-# Try to detect type of SVGA card and supply (usually approximate) video
-# mode table for it.
-
-#ifdef CONFIG_VIDEO_SVGA
-svga_modes:
-	leaw	svga_table, %si			# Test all known SVGA adapters
-dosvga:	lodsw
-	movw	%ax, %bp			# Default mode table
-	orw	%ax, %ax
-	jz	didsv1
-
-	lodsw					# Pointer to test routine
-	pushw	%si
-	pushw	%di
-	pushw	%es
-	movw	$0xc000, %bx
-	movw	%bx, %es
-	call	*%ax				# Call test routine
-	popw	%es
-	popw	%di
-	popw	%si
-	orw	%bp, %bp
-	jz	dosvga
-	
-	movw	%bp, %si			# Found, copy the modes
-	movb	svga_prefix, %ah
-cpsvga:	lodsb
-	orb	%al, %al
-	jz	didsv
-	
-	stosw
-	movsw
-	jmp	cpsvga
-
-didsv:	movw	%si, card_name			# Store pointer to card name
-didsv1:	ret
-
-# Table of all known SVGA cards. For each card, we store a pointer to
-# a table of video modes supported by the card and a pointer to a routine
-# used for testing of presence of the card. The video mode table is always
-# followed by the name of the card or the chipset.
-svga_table:
-	.word	ati_md, ati_test
-	.word	oak_md, oak_test
-	.word	paradise_md, paradise_test
-	.word	realtek_md, realtek_test
-	.word	s3_md, s3_test
-	.word	chips_md, chips_test
-	.word	video7_md, video7_test
-	.word	cirrus5_md, cirrus5_test
-	.word	cirrus6_md, cirrus6_test
-	.word	cirrus1_md, cirrus1_test
-	.word	ahead_md, ahead_test
-	.word	everex_md, everex_test
-	.word	genoa_md, genoa_test
-	.word	trident_md, trident_test
-	.word	tseng_md, tseng_test
-	.word	0
-
-# Test routines and mode tables:
-
-# S3 - The test algorithm was taken from the SuperProbe package
-# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org
-s3_test:
-	movw	$0x0f35, %cx	# we store some constants in cl/ch
-	movw	$0x03d4, %dx
-	movb	$0x38, %al
-	call	inidx
-	movb	%al, %bh	# store current CRT-register 0x38
-	movw	$0x0038, %ax
-	call	outidx		# disable writing to special regs
-	movb	%cl, %al	# check whether we can write special reg 0x35
-	call	inidx
-	movb	%al, %bl	# save the current value of CRT reg 0x35
-	andb	$0xf0, %al	# clear bits 0-3
-	movb	%al, %ah
-	movb	%cl, %al	# and write it to CRT reg 0x35
-	call	outidx
-	call	inidx		# now read it back
-	andb	%ch, %al	# clear the upper 4 bits
-	jz	s3_2		# the first test failed. But we have a
-
-	movb	%bl, %ah	# second chance
-	movb	%cl, %al
-	call	outidx
-	jmp	s3_1		# do the other tests
-
-s3_2:	movw	%cx, %ax	# load ah with 0xf and al with 0x35
-	orb	%bl, %ah	# set the upper 4 bits of ah with the orig value
-	call	outidx		# write ...
-	call	inidx		# ... and reread 
-	andb	%cl, %al	# turn off the upper 4 bits
-	pushw	%ax
-	movb	%bl, %ah	# restore old value in register 0x35
-	movb	%cl, %al
-	call	outidx
-	popw	%ax
-	cmpb	%ch, %al	# setting lower 4 bits was successful => bad
-	je	no_s3		# writing is allowed => this is not an S3
-
-s3_1:	movw	$0x4838, %ax	# allow writing to special regs by putting
-	call	outidx		# magic number into CRT-register 0x38
-	movb	%cl, %al	# check whether we can write special reg 0x35
-	call	inidx
-	movb	%al, %bl
-	andb	$0xf0, %al
-	movb	%al, %ah
-	movb	%cl, %al
-	call	outidx
-	call	inidx
-	andb	%ch, %al
-	jnz	no_s3		# no, we can't write => no S3
-
-	movw	%cx, %ax
-	orb	%bl, %ah
-	call	outidx
-	call	inidx
-	andb	%ch, %al
-	pushw	%ax
-	movb	%bl, %ah	# restore old value in register 0x35
-	movb	%cl, %al
-	call	outidx
-	popw	%ax
-	cmpb	%ch, %al
-	jne	no_s31		# writing not possible => no S3
-	movb	$0x30, %al
-	call	inidx		# now get the S3 id ...
-	leaw	idS3, %di
-	movw	$0x10, %cx
-	repne
-	scasb
-	je	no_s31
-
-	movb	%bh, %ah
-	movb	$0x38, %al
-	jmp	s3rest
-
-no_s3:	movb	$0x35, %al	# restore CRT register 0x35
-	movb	%bl, %ah
-	call	outidx
-no_s31:	xorw	%bp, %bp	# Detection failed
-s3rest:	movb	%bh, %ah
-	movb	$0x38, %al	# restore old value of CRT register 0x38
-	jmp	outidx
-
-idS3:	.byte	0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95
-	.byte	0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0
-
-s3_md:	.byte	0x54, 0x2b, 0x84
-	.byte	0x55, 0x19, 0x84
-	.byte	0
-	.ascii	"S3"
-	.byte	0
-
-# ATI cards.
-ati_test:
-	leaw 	idati, %si
-	movw	$0x31, %di
-	movw	$0x09, %cx
-	repe
-	cmpsb
-	je	atiok
-
-	xorw	%bp, %bp
-atiok:	ret
-
-idati:	.ascii	"761295520"
-
-ati_md:	.byte	0x23, 0x19, 0x84
-	.byte	0x33, 0x2c, 0x84
-	.byte	0x22, 0x1e, 0x64
-	.byte	0x21, 0x19, 0x64
-	.byte	0x58, 0x21, 0x50
-	.byte	0x5b, 0x1e, 0x50
-	.byte	0
-	.ascii	"ATI"
-	.byte	0
-
-# AHEAD
-ahead_test:
-	movw	$0x200f, %ax
-	movw	$0x3ce, %dx
-	outw	%ax, %dx
-	incw	%dx
-	inb	%dx, %al
-	cmpb	$0x20, %al
-	je	isahed
-
-	cmpb	$0x21, %al
-	je	isahed
-	
-	xorw	%bp, %bp
-isahed:	ret
-
-ahead_md:
-	.byte	0x22, 0x2c, 0x84
-	.byte	0x23, 0x19, 0x84
-	.byte	0x24, 0x1c, 0x84
-	.byte	0x2f, 0x32, 0xa0
-	.byte	0x32, 0x22, 0x50
-	.byte	0x34, 0x42, 0x50
-	.byte	0
-	.ascii	"Ahead"
-	.byte	0
-
-# Chips & Tech.
-chips_test:
-	movw	$0x3c3, %dx
-	inb	%dx, %al
-	orb	$0x10, %al
-	outb	%al, %dx
-	movw	$0x104, %dx
-	inb	%dx, %al
-	movb	%al, %bl
-	movw	$0x3c3, %dx
-	inb	%dx, %al
-	andb	$0xef, %al
-	outb	%al, %dx
-	cmpb	$0xa5, %bl
-	je	cantok
-	
-	xorw	%bp, %bp
-cantok:	ret
-
-chips_md:
-	.byte	0x60, 0x19, 0x84
-	.byte	0x61, 0x32, 0x84
-	.byte	0
-	.ascii	"Chips & Technologies"
-	.byte	0
-
-# Cirrus Logic 5X0
-cirrus1_test:
-	movw	$0x3d4, %dx
-	movb	$0x0c, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bl
-	xorb	%al, %al
-	outb	%al, %dx
-	decw	%dx
-	movb	$0x1f, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bh
-	xorb	%ah, %ah
-	shlb	$4, %al
-	movw	%ax, %cx
-	movb	%bh, %al
-	shrb	$4, %al
-	addw	%ax, %cx
-	shlw	$8, %cx
-	addw	$6, %cx
-	movw	%cx, %ax
-	movw	$0x3c4, %dx
-	outw	%ax, %dx
-	incw	%dx
-	inb	%dx, %al
-	andb	%al, %al
-	jnz	nocirr
-	
-	movb	%bh, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	cmpb	$0x01, %al
-	je	iscirr
-
-nocirr:	xorw	%bp, %bp
-iscirr: movw	$0x3d4, %dx
-	movb	%bl, %al
-	xorb	%ah, %ah
-	shlw	$8, %ax
-	addw	$0x0c, %ax
-	outw	%ax, %dx
-	ret
-
-cirrus1_md:
-	.byte	0x1f, 0x19, 0x84
-	.byte	0x20, 0x2c, 0x84
-	.byte	0x22, 0x1e, 0x84
-	.byte	0x31, 0x25, 0x64
-	.byte	0
-	.ascii	"Cirrus Logic 5X0"
-	.byte	0
-
-# Cirrus Logic 54XX
-cirrus5_test:
-	movw	$0x3c4, %dx
-	movb	$6, %al
-	call	inidx
-	movb	%al, %bl			# BL=backup
-	movw	$6, %ax
-	call	tstidx
-	cmpb	$0x0f, %al
-	jne	c5fail
-	
-	movw	$0x1206, %ax
-	call	tstidx
-	cmpb	$0x12, %al
-	jne	c5fail
-	
-	movb	$0x1e, %al
-	call	inidx
-	movb	%al, %bh
-	movb	%bh, %ah
-	andb	$0xc0, %ah
-	movb	$0x1e, %al
-	call	tstidx
-	andb	$0x3f, %al
-	jne	c5xx
-	
-	movb	$0x1e, %al
-	movb	%bh, %ah
-	orb	$0x3f, %ah
-	call	tstidx
-	xorb	$0x3f, %al
-	andb	$0x3f, %al
-c5xx:	pushf
-	movb	$0x1e, %al
-	movb	%bh, %ah
-	outw	%ax, %dx
-	popf
-	je	c5done
-
-c5fail:	xorw	%bp, %bp
-c5done:	movb	$6, %al
-	movb	%bl, %ah
-	outw	%ax, %dx
-	ret
-
-cirrus5_md:
-	.byte	0x14, 0x19, 0x84
-	.byte	0x54, 0x2b, 0x84
-	.byte	0
-	.ascii	"Cirrus Logic 54XX"
-	.byte	0
-
-# Cirrus Logic 64XX -- no known extra modes, but must be identified, because
-# it's misidentified by the Ahead test.
-cirrus6_test:
-	movw	$0x3ce, %dx
-	movb	$0x0a, %al
-	call	inidx
-	movb	%al, %bl	# BL=backup
-	movw	$0xce0a, %ax
-	call	tstidx
-	orb	%al, %al
-	jne	c2fail
-	
-	movw	$0xec0a, %ax
-	call	tstidx
-	cmpb	$0x01, %al
-	jne	c2fail
-	
-	movb	$0xaa, %al
-	call	inidx		# 4X, 5X, 7X and 8X are valid 64XX chip ID's. 
-	shrb	$4, %al
-	subb	$4, %al
-	jz	c6done
-	
-	decb	%al
-	jz	c6done
-	
-	subb	$2, %al
-	jz	c6done
-	
-	decb	%al
-	jz	c6done
-	
-c2fail:	xorw	%bp, %bp
-c6done:	movb	$0x0a, %al
-	movb	%bl, %ah
-	outw	%ax, %dx
-	ret
-
-cirrus6_md:
-	.byte	0
-	.ascii	"Cirrus Logic 64XX"
-	.byte	0
-
-# Everex / Trident
-everex_test:
-	movw	$0x7000, %ax
-	xorw	%bx, %bx
-	int	$0x10
-	cmpb	$0x70, %al
-	jne	noevrx
-	
-	shrw	$4, %dx
-	cmpw	$0x678, %dx
-	je	evtrid
-	
-	cmpw	$0x236, %dx
-	jne	evrxok
-
-evtrid:	leaw	trident_md, %bp
-evrxok:	ret
-
-noevrx:	xorw	%bp, %bp
-	ret
-
-everex_md:
-	.byte	0x03, 0x22, 0x50
-	.byte	0x04, 0x3c, 0x50
-	.byte	0x07, 0x2b, 0x64
-	.byte	0x08, 0x4b, 0x64
-	.byte	0x0a, 0x19, 0x84
-	.byte	0x0b, 0x2c, 0x84
-	.byte	0x16, 0x1e, 0x50
-	.byte	0x18, 0x1b, 0x64
-	.byte	0x21, 0x40, 0xa0
-	.byte	0x40, 0x1e, 0x84
-	.byte	0
-	.ascii	"Everex/Trident"
-	.byte	0
-
-# Genoa.
-genoa_test:
-	leaw	idgenoa, %si			# Check Genoa 'clues'
-	xorw	%ax, %ax
-	movb	%es:(0x37), %al
-	movw	%ax, %di
-	movw	$0x04, %cx
-	decw	%si
-	decw	%di
-l1:	incw	%si
-	incw	%di
-	movb	(%si), %al
-	testb	%al, %al
-	jz	l2
-
-	cmpb	%es:(%di), %al
-l2:	loope 	l1
-	orw	%cx, %cx
-	je	isgen
-	
-	xorw	%bp, %bp
-isgen:	ret
-
-idgenoa: .byte	0x77, 0x00, 0x99, 0x66
-
-genoa_md:
-	.byte	0x58, 0x20, 0x50
-	.byte	0x5a, 0x2a, 0x64
-	.byte	0x60, 0x19, 0x84
-	.byte	0x61, 0x1d, 0x84
-	.byte	0x62, 0x20, 0x84
-	.byte	0x63, 0x2c, 0x84
-	.byte	0x64, 0x3c, 0x84
-	.byte	0x6b, 0x4f, 0x64
-	.byte	0x72, 0x3c, 0x50
-	.byte	0x74, 0x42, 0x50
-	.byte	0x78, 0x4b, 0x64
-	.byte	0
-	.ascii	"Genoa"
-	.byte	0
-
-# OAK
-oak_test:
-	leaw	idoakvga, %si
-	movw	$0x08, %di
-	movw	$0x08, %cx
-	repe
-	cmpsb
-	je	isoak
-	
-	xorw	%bp, %bp
-isoak:	ret
-
-idoakvga: .ascii  "OAK VGA "
-
-oak_md: .byte	0x4e, 0x3c, 0x50
-	.byte	0x4f, 0x3c, 0x84
-	.byte	0x50, 0x19, 0x84
-	.byte	0x51, 0x2b, 0x84
-	.byte	0
-	.ascii	"OAK"
-	.byte	0
-
-# WD Paradise.
-paradise_test:
-	leaw	idparadise, %si
-	movw	$0x7d, %di
-	movw	$0x04, %cx
-	repe
-	cmpsb
-	je	ispara
-	
-	xorw	%bp, %bp
-ispara:	ret
-
-idparadise:	.ascii	"VGA="
-
-paradise_md:
-	.byte	0x41, 0x22, 0x50
-	.byte	0x47, 0x1c, 0x84
-	.byte	0x55, 0x19, 0x84
-	.byte	0x54, 0x2c, 0x84
-	.byte	0
-	.ascii	"Paradise"
-	.byte	0
-
-# Trident.
-trident_test:
-	movw	$0x3c4, %dx
-	movb	$0x0e, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	xchgb	%al, %ah
-	xorb	%al, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	xchgb	%ah, %al
-	movb	%al, %bl	# Strange thing ... in the book this wasn't
-	andb	$0x02, %bl	# necessary but it worked on my card which
-	jz	setb2		# is a trident. Without it the screen goes
-				# blurred ...
-	andb	$0xfd, %al
-	jmp	clrb2		
-
-setb2:	orb	$0x02, %al	
-clrb2:	outb	%al, %dx
-	andb	$0x0f, %ah
-	cmpb	$0x02, %ah
-	je	istrid
-
-	xorw	%bp, %bp
-istrid:	ret
-
-trident_md:
-	.byte	0x50, 0x1e, 0x50
-	.byte	0x51, 0x2b, 0x50
-	.byte	0x52, 0x3c, 0x50
-	.byte	0x57, 0x19, 0x84
-	.byte	0x58, 0x1e, 0x84
-	.byte	0x59, 0x2b, 0x84
-	.byte	0x5a, 0x3c, 0x84
-	.byte	0
-	.ascii	"Trident"
-	.byte	0
-
-# Tseng.
-tseng_test:
-	movw	$0x3cd, %dx
-	inb	%dx, %al	# Could things be this simple ! :-)
-	movb	%al, %bl
-	movb	$0x55, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	movb	%al, %ah
-	movb	%bl, %al
-	outb	%al, %dx
-	cmpb	$0x55, %ah
- 	je	istsen
-
-isnot:	xorw	%bp, %bp
-istsen:	ret
-
-tseng_md:
-	.byte	0x26, 0x3c, 0x50
-	.byte	0x2a, 0x28, 0x64
-	.byte	0x23, 0x19, 0x84
-	.byte	0x24, 0x1c, 0x84
-	.byte	0x22, 0x2c, 0x84
-	.byte	0x21, 0x3c, 0x84
-	.byte	0
-	.ascii	"Tseng"
-	.byte	0
-
-# Video7.
-video7_test:
-	movw	$0x3cc, %dx
-	inb	%dx, %al
-	movw	$0x3b4, %dx
-	andb	$0x01, %al
-	jz	even7
-
-	movw	$0x3d4, %dx
-even7:	movb	$0x0c, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bl
-	movb	$0x55, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	decw	%dx
-	movb	$0x1f, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bh
-	decw	%dx
-	movb	$0x0c, %al
-	outb	%al, %dx
-	incw	%dx
-	movb	%bl, %al
-	outb	%al, %dx
-	movb	$0x55, %al
-	xorb	$0xea, %al
-	cmpb	%bh, %al
-	jne	isnot
-	
-	movb	$VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching
-	ret
-
-video7_md:
-	.byte	0x40, 0x2b, 0x50
-	.byte	0x43, 0x3c, 0x50
-	.byte	0x44, 0x3c, 0x64
-	.byte	0x41, 0x19, 0x84
-	.byte	0x42, 0x2c, 0x84
-	.byte	0x45, 0x1c, 0x84
-	.byte	0
-	.ascii	"Video 7"
-	.byte	0
-
-# Realtek VGA
-realtek_test:
-	leaw	idrtvga, %si
-	movw	$0x45, %di
-	movw	$0x0b, %cx
-	repe
-	cmpsb
-	je	isrt
-	
-	xorw	%bp, %bp
-isrt:	ret
-
-idrtvga:	.ascii	"REALTEK VGA"
-
-realtek_md:
-	.byte	0x1a, 0x3c, 0x50
-	.byte	0x1b, 0x19, 0x84
-	.byte	0x1c, 0x1e, 0x84
-	.byte	0x1d, 0x2b, 0x84
-	.byte	0x1e, 0x3c, 0x84
-	.byte	0
-	.ascii	"REALTEK"
-	.byte	0
-
-#endif	/* CONFIG_VIDEO_SVGA */
-
-# User-defined local mode table (VGA only)
-#ifdef CONFIG_VIDEO_LOCAL
-local_modes:
-	leaw	local_mode_table, %si
-locm1:	lodsw
-	orw	%ax, %ax
-	jz	locm2
-	
-	stosw
-	movsw
-	jmp	locm1
-
-locm2:	ret
-
-# This is the table of local video modes which can be supplied manually
-# by the user. Each entry consists of mode ID (word) and dimensions
-# (byte for column count and another byte for row count). These modes
-# are placed before all SVGA and VESA modes and override them if table
-# compacting is enabled. The table must end with a zero word followed
-# by NUL-terminated video adapter name.
-local_mode_table:
-	.word	0x0100				# Example: 40x25
-	.byte	25,40
-	.word	0
-	.ascii	"Local"
-	.byte	0
-#endif	/* CONFIG_VIDEO_LOCAL */
-
-# Read a key and return the ASCII code in al, scan code in ah
-getkey:	xorb	%ah, %ah
-	int	$0x16
-	ret
-
-# Read a key with a timeout of 30 seconds.
-# The hardware clock is used to get the time.
-getkt:	call	gettime
-	addb	$30, %al			# Wait 30 seconds
-	cmpb	$60, %al
-	jl	lminute
-
-	subb	$60, %al
-lminute:
-	movb	%al, %cl
-again:	movb	$0x01, %ah
-	int	$0x16
-	jnz	getkey				# key pressed, so get it
-
-	call	gettime
-	cmpb	%cl, %al
-	jne	again
-
-	movb	$0x20, %al			# timeout, return `space'
-	ret
-
-# Flush the keyboard buffer
-flush:	movb	$0x01, %ah
-	int	$0x16
-	jz	empty
-	
-	xorb	%ah, %ah
-	int	$0x16
-	jmp	flush
-
-empty:	ret
-
-# Print hexadecimal number.
-prthw:	pushw	%ax
-	movb	%ah, %al
-	call	prthb
-	popw	%ax
-prthb:	pushw	%ax
-	shrb	$4, %al
-	call	prthn
-	popw	%ax
-	andb	$0x0f, %al
-prthn:	cmpb	$0x0a, %al
-	jc	prth1
-
-	addb	$0x07, %al
-prth1:	addb	$0x30, %al
-	jmp	prtchr
-
-# Print decimal number in al
-prtdec:	pushw	%ax
-	pushw	%cx
-	xorb	%ah, %ah
-	movb	$0x0a, %cl
-	idivb	%cl
-	cmpb	$0x09, %al
-	jbe	lt100
-
-	call	prtdec
-	jmp	skip10
-
-lt100:	addb	$0x30, %al
-	call	prtchr
-skip10:	movb	%ah, %al
-	addb	$0x30, %al
-	call	prtchr	
-	popw	%cx
-	popw	%ax
-	ret
-
-store_edid:
-#ifdef CONFIG_FIRMWARE_EDID
-	pushw	%es				# just save all registers
-	pushw	%ax
-	pushw	%bx
-	pushw   %cx
-	pushw	%dx
-	pushw   %di
-
-	pushw	%fs
-	popw    %es
-
-	movl	$0x13131313, %eax		# memset block with 0x13
-	movw    $32, %cx
-	movw	$0x140, %di
-	cld
-	rep
-	stosl
-
-	cmpw	$0x0200, vbe_version		# only do EDID on >= VBE2.0
-	jl	no_edid
-
-	pushw   %es				# save ES
-	xorw    %di, %di                        # Report Capability
-	pushw   %di
-	popw    %es                             # ES:DI must be 0:0
-	movw	$0x4f15, %ax
-	xorw	%bx, %bx
-	xorw	%cx, %cx
-	int	$0x10
-	popw    %es                             # restore ES
-
-	cmpb    $0x00, %ah                      # call successful
-	jne     no_edid
-
-	cmpb    $0x4f, %al                      # function supported
-	jne     no_edid
-
-	movw	$0x4f15, %ax                    # do VBE/DDC
-	movw	$0x01, %bx
-	movw	$0x00, %cx
-	movw    $0x00, %dx
-	movw	$0x140, %di
-	int	$0x10
-
-no_edid:
-	popw	%di				# restore all registers
-	popw	%dx
-	popw	%cx
-	popw	%bx
-	popw	%ax
-	popw	%es
-#endif
-	ret
-
-# VIDEO_SELECT-only variables
-mt_end:		.word	0	# End of video mode table if built
-edit_buf:	.space	6	# Line editor buffer
-card_name:	.word	0	# Pointer to adapter name
-scanning:	.byte	0	# Performing mode scan
-do_restore:	.byte	0	# Screen contents altered during mode change
-svga_prefix:	.byte	VIDEO_FIRST_BIOS>>8	# Default prefix for BIOS modes
-graphic_mode:	.byte	0	# Graphic mode with a linear frame buffer
-dac_size:	.byte	6	# DAC bit depth
-vbe_version:	.word	0	# VBE bios version
-
-# Status messages
-keymsg:		.ascii	"Press <RETURN> to see video modes available, "
-		.ascii	"<SPACE> to continue or wait 30 secs"
-		.byte	0x0d, 0x0a, 0
-
-listhdr:	.byte	0x0d, 0x0a
-		.ascii	"Mode:    COLSxROWS:"
-
-crlft:		.byte	0x0d, 0x0a, 0
-
-prompt:		.byte	0x0d, 0x0a
-		.asciz	"Enter mode number or `scan': "
-
-unknt:		.asciz	"Unknown mode ID. Try again."
-
-badmdt:		.ascii	"You passed an undefined mode number."
-		.byte	0x0d, 0x0a, 0
-
-vesaer:		.ascii	"Error: Scanning of VESA modes failed. Please "
-		.ascii	"report to <mj@ucw.cz>."
-		.byte	0x0d, 0x0a, 0
-
-old_name:	.asciz	"CGA/MDA/HGA"
-
-ega_name:	.asciz	"EGA"
-
-svga_name:	.ascii	" "
-
-vga_name:	.asciz	"VGA"
-
-vesa_name:	.asciz	"VESA"
-
-name_bann:	.asciz	"Video adapter: "
-#endif /* CONFIG_VIDEO_SELECT */
-
-# Other variables:
-adapter:	.byte	0	# Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA
-video_segment:	.word	0xb800	# Video memory segment
-force_size:	.word	0	# Use this size instead of the one in BIOS vars
diff --git a/arch/i386/kernel/verify_cpu.S b/arch/i386/kernel/verify_cpu.S
deleted file mode 100644
index fff4aa61d7c3..000000000000
--- a/arch/i386/kernel/verify_cpu.S
+++ /dev/null
@@ -1,94 +0,0 @@
-/* Check if CPU has some minimum CPUID bits
-   This runs in 16bit mode so that the caller can still use the BIOS
-   to output errors on the screen */
-#include <asm/cpufeature.h>
-#include <asm/msr.h>
-
-verify_cpu:
-	pushfl				# Save caller passed flags
-	pushl	$0			# Kill any dangerous flags
-	popfl
-
-#if CONFIG_X86_MINIMUM_CPU_FAMILY >= 4
-	pushfl
-	pop	%eax
-	orl	$(1<<18),%eax		# try setting AC
-	push	%eax
-	popfl
-	pushfl
-	popl    %eax
-	testl	$(1<<18),%eax
-	jz	bad
-#endif
-#if REQUIRED_MASK0 != 0
-	pushfl				# standard way to check for cpuid
-	popl	%eax
-	movl	%eax,%ebx
-	xorl	$0x200000,%eax
-	pushl	%eax
-	popfl
-	pushfl
-	popl	%eax
-	cmpl	%eax,%ebx
-	pushfl				# standard way to check for cpuid
-	popl	%eax
-	movl	%eax,%ebx
-	xorl	$0x200000,%eax
-	pushl	%eax
-	popfl
-	pushfl
-	popl	%eax
-	cmpl	%eax,%ebx
-	jz	bad			# REQUIRED_MASK0 != 0 requires CPUID
-
-	movl	$0x0,%eax		# See if cpuid 1 is implemented
-	cpuid
-	cmpl	$0x1,%eax
-	jb	bad			# no cpuid 1
-
-#if REQUIRED_MASK0 & NEED_CMPXCHG64
-	/* Some VIA C3s need magic MSRs to enable CX64. Do this here */
-	cmpl	$0x746e6543,%ebx	# Cent
-	jne	1f
-	cmpl 	$0x48727561,%edx	# aurH
-	jne	1f
-	cmpl	$0x736c7561,%ecx	# auls
-	jne	1f
-	movl	$1,%eax			# check model
-	cpuid
-	movl	%eax,%ebx
-	shr	$8,%ebx
-	andl	$0xf,%ebx
-	cmp	$6,%ebx			# check family == 6
-	jne	1f
-	shr	$4,%eax
-	andl	$0xf,%eax
-	cmpl	$6,%eax			# check model >= 6
-	jb	1f
-	# assume models >= 6 all support this MSR
-	movl	$MSR_VIA_FCR,%ecx
-	rdmsr
-	orl	$((1<<1)|(1<<7)),%eax	# enable CMPXCHG64 and PGE
-	wrmsr
-1:
-#endif
-	movl    $0x1,%eax		# Does the cpu have what it takes
-	cpuid
-
-#if CONFIG_X86_MINIMUM_CPU_FAMILY > 4
-#error	add proper model checking here
-#endif
-
-	andl	$REQUIRED_MASK0,%edx
-	xorl	$REQUIRED_MASK0,%edx
-	jnz	bad
-#endif /* REQUIRED_MASK0 */
-
-	popfl
-	xor	%eax,%eax
-	ret
-
-bad:
-	popfl
-	movl	$1,%eax
-	ret
author	H. Peter Anvin <hpa@zytor.com>	2007-07-11 12:18:58 -0700
committer	Linus Torvalds <torvalds@woody.linux-foundation.org>	2007-07-12 10:55:56 -0700
commit	c39736823232bc3ca113c8228fa852c09fba300e (patch)
tree	94fe2f8b27879cee904b09d1effb91ccc3ce6e0a /arch/i386
parent	91a6c462b02d8dc02dbe95e5a407d78078a38d01 (diff)
download	talos-op-linux-c39736823232bc3ca113c8228fa852c09fba300e.tar.gz talos-op-linux-c39736823232bc3ca113c8228fa852c09fba300e.zip