Merge branch 'from-linus' into upstream

10 files changed, 21 insertions, 15 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5d3acff8c596..d22f38b957db 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -101,7 +101,7 @@ config DEBUG_S3C2410_UART
 	help
 	  Choice for UART for kernel low-level using S3C2410 UARTS,
 	  should be between zero and two. The port must have been
-	  initalised by the boot-loader before use.
+	  initialised by the boot-loader before use.
 
 	  The uncompressor code port configuration is now handled
 	  by CONFIG_S3C2410_LOWLEVEL_UART_PORT.
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 9be01b0c3f48..e24566b88a78 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -111,21 +111,21 @@ static void __init ts72xx_map_io(void)
 	}
 }
 
-static unsigned char ts72xx_rtc_readb(unsigned long addr)
+static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
 	return __raw_readb(TS72XX_RTC_DATA_VIRT_BASE);
 }
 
-static void ts72xx_rtc_writeb(unsigned char value, unsigned long addr)
+static void ts72xx_rtc_writebyte(unsigned char value, unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
 	__raw_writeb(value, TS72XX_RTC_DATA_VIRT_BASE);
 }
 
 static struct m48t86_ops ts72xx_rtc_ops = {
-	.readb			= ts72xx_rtc_readb,
-	.writeb			= ts72xx_rtc_writeb,
+	.readbyte		= ts72xx_rtc_readbyte,
+	.writebyte		= ts72xx_rtc_writebyte,
 };
 
 static struct platform_device ts72xx_rtc_device = {
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index eeb8a6d4a399..a5de5f1da9f2 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -127,7 +127,7 @@ static void
 imx_gpio_ack_irq(unsigned int irq)
 {
 	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
-	ISR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
+	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
 }
 
 static void
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a0724f2b24ce..9f55f5ae1044 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -232,8 +232,6 @@ static void __init intcp_init_irq(void)
 	for (i = IRQ_PIC_START; i <= IRQ_PIC_END; i++) {
 		if (i == 11)
 			i = 22;
-		if (i == IRQ_CP_CPPLDINT)
-			i++;
 		if (i == 29)
 			break;
 		set_irq_chip(i, &pic_chip);
@@ -259,8 +257,7 @@ static void __init intcp_init_irq(void)
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
 
-	set_irq_handler(IRQ_CP_CPPLDINT, sic_handle_irq);
-	pic_unmask_irq(IRQ_CP_CPPLDINT);
+	set_irq_chained_handler(IRQ_CP_CPPLDINT, sic_handle_irq);
 }
 
 /*
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2a39f9e481ad..3b23f43cb160 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -141,7 +141,7 @@ config IXP4XX_INDIRECT_PCI
           2) If > 64MB of memory space is required, the IXP4xx can be 
 	     configured to use indirect registers to access PCI This allows 
 	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-	     The disadvantadge of this is that every PCI access requires 
+	     The disadvantage of this is that every PCI access requires 
 	     three local register accesses plus a spinlock, but in some 
 	     cases the performance hit is acceptable. In addition, you cannot 
 	     mmap() PCI devices in this case due to the indirect nature
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 02e188d98e7d..b307f11951df 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -493,6 +493,7 @@ static void __init mainstone_map_io(void)
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
 	.init_irq	= mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 19b372df544a..44bcb8097c7a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -371,6 +371,7 @@ static int spitz_ohci_init(struct device *dev)
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.power_budget	= 150,
 };
 
 
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index ce7d81000695..970f98dadffc 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -170,7 +170,7 @@ config S3C2410_PM_DEBUG
 	depends on ARCH_S3C2410 && PM
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
 config S3C2410_PM_CHECK
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 9e02bc3712a0..af6d2775cf82 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -59,6 +59,14 @@ neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg
 		if (irr & (IRR_ETHERNET | IRR_USAR)) {
 			desc->chip->mask(irq);
 
+			/*
+			 * Ack the interrupt now to prevent re-entering
+			 * this neponset handler.  Again, this is safe
+			 * since we'll check the IRR register prior to
+			 * leaving.
+			 */
+			desc->chip->ack(irq);
+
 			if (irr & IRR_ETHERNET) {
 				d = irq_desc + IRQ_NEPONSET_SMC9196;
 				desc_handle_irq(IRQ_NEPONSET_SMC9196, d, regs);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 799697d32dec..cebd48a3dae4 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -112,10 +112,9 @@ void __init versatile_init_irq(void)
 {
 	unsigned int i;
 
-	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~(1 << 31));
+	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
 
-	set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
-	enable_irq(IRQ_VICSOURCE31);
+	set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
 
 	/* Do second interrupt controller */
 	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);