Merge branch 'linux-2.6'

9 files changed, 256 insertions, 24 deletions

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 8e8fe48ea47f..0b43431d4b75 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -10,6 +10,7 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C2410_DMA
+	select S3C2410_GPIO
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index f8e011691b31..267f3348301e 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,8 +12,9 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
+obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
-obj-$(CONFIG_S3C2412_PM)	+= pm.o
+obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 458993601897..2697a65ba727 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -217,7 +217,7 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
 
 	if (parent == &clk_mdivclk)
 		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_upll)
+	else if (parent == &clk_mpll)
 		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
 	else
 		return -EINVAL;
@@ -234,6 +234,45 @@ static struct clk clk_msysclk = {
 	.set_parent	= s3c2412_setparent_msysclk,
 };
 
+static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+	unsigned long clkdiv;
+	unsigned long dvs;
+
+	/* Note, we current equate fclk andf msysclk for S3C2412 */
+
+	if (parent == &clk_msysclk || parent == &clk_f)
+		dvs = 0;
+	else if (parent == &clk_h)
+		dvs = S3C2412_CLKDIVN_DVSEN;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	/* update this under irq lockdown, clkdivn is not protected
+	 * by the clock system. */
+
+	local_irq_save(flags);
+
+	clkdiv  = __raw_readl(S3C2410_CLKDIVN);
+	clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
+	clkdiv |= dvs;
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clk clk_armclk = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_msysclk,
+	.set_parent	= s3c2412_setparent_armclk,
+};
+
 /* these next clocks have an divider immediately after them,
  * so we can register them with their divider and leave out the
  * intermediate clock stage
@@ -630,11 +669,13 @@ static struct clk *clks[] __initdata = {
 	&clk_erefclk,
 	&clk_urefclk,
 	&clk_mrefclk,
+	&clk_armclk,
 };
 
 int __init s3c2412_baseclk_add(void)
 {
 	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
+	unsigned int dvs;
 	struct clk *clkp;
 	int ret;
 	int ptr;
@@ -643,6 +684,8 @@ int __init s3c2412_baseclk_add(void)
 	clk_usb_bus.parent = &clk_usbsrc;
 	clk_usb_bus.rate = 0x0;
 
+	clk_f.parent = &clk_msysclk;
+
 	s3c2412_clk_initparents();
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -655,6 +698,15 @@ int __init s3c2412_baseclk_add(void)
 		}
 	}
 
+	/* set the dvs state according to what we got at boot time */
+
+	dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
+
+	if (dvs)
+		clk_armclk.parent = &clk_h;
+
+	printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
+
 	/* ensure usb bus clock is within correct rate of 48MHz */
 
 	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 53c1d5bbce19..1dd864993566 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -30,6 +30,7 @@
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-sdi.h>
+#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
@@ -39,106 +40,141 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 	[DMACH_XD0] = {
 		.name		= "xdreq0",
 		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ0),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_XDREQ0),
 	},
 	[DMACH_XD1] = {
 		.name		= "xdreq1",
 		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ1),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_XDREQ1),
 	},
 	[DMACH_SDI] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_SDI),
+		.hw_addr.to	= S3C2410_PA_SDI + S3C2410_SDIDATA,
+		.hw_addr.from	= S3C2410_PA_SDI + S3C2410_SDIDATA,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI0RX),
 		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
 		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI1RX),
 		.hw_addr.to	= S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
 		.hw_addr.from	= S3C2410_PA_SPI + S3C2412_SPI1  + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_0),
 		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
 		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_0),
 		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
 		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_0),
 		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
 		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_UART0_SRC2] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_1),
 		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
 		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1_SRC2] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_1),
 		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
 		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2_SRC2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_1),
 		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
 		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
 		.channels	= MAP(S3C2412_DMAREQSEL_TIMER),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_TIMER),
 	},
 	[DMACH_I2S_IN] = {
 		.name		= "i2s-sdi",
 		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2SRX),
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2412_IISRXD,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2STX),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2412_IISTXD,
 	},
 	[DMACH_USB_EP1] = {
 		.name		= "usb-ep1",
 		.channels	= MAP(S3C2412_DMAREQSEL_USBEP1),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP1),
 	},
 	[DMACH_USB_EP2] = {
 		.name		= "usb-ep2",
 		.channels	= MAP(S3C2412_DMAREQSEL_USBEP2),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP2),
 	},
 	[DMACH_USB_EP3] = {
 		.name		= "usb-ep3",
 		.channels	= MAP(S3C2412_DMAREQSEL_USBEP3),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP3),
 	},
 	[DMACH_USB_EP4] = {
 		.name		= "usb-ep4",
 		.channels	= MAP(S3C2412_DMAREQSEL_USBEP4),
+		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP4),
 	},
 };
 
+static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
+				  struct s3c24xx_dma_map *map,
+				  enum s3c2410_dmasrc dir)
+{
+	unsigned long chsel;
+
+	if (dir == S3C2410_DMASRC_HW)
+		chsel = map->channels_rx[0];
+	else
+		chsel = map->channels[0];
+
+	chsel &= ~DMA_CH_VALID;
+	chsel |= S3C2412_DMAREQSEL_HW;
+
+	writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL);
+}
+
 static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
 			       struct s3c24xx_dma_map *map)
 {
-	writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
-	       chan->regs + S3C2412_DMA_DMAREQSEL);
+	s3c2412_dma_direction(chan, map, chan->source);
 }
 
 static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
 	.select		= s3c2412_dma_select,
+	.direction	= s3c2412_dma_direction,
 	.dcon_mask	= 0,
 	.map		= s3c2412_dma_mappings,
 	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 000000000000..8e55c3a2eab8
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,60 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/hardware.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long slpcon;
+
+	offs *= 2;
+
+	if (pin < S3C2410_GPIO_BANKB)
+		return -EINVAL;
+
+	if (pin >= S3C2410_GPIO_BANKF &&
+	    pin <= S3C2410_GPIO_BANKG)
+		return -EINVAL;
+
+	if (pin > (S3C2410_GPIO_BANKH + 32))
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	slpcon = __raw_readl(base + 0x0C);
+
+	slpcon &= ~(3 << offs);
+	slpcon |= state << offs;
+
+	__raw_writel(slpcon, base + 0x0C);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index e9d0c769f5da..cc1917bf952a 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -33,6 +33,7 @@
 
 #include <asm/arch/regs-irq.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-power.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/irq.h>
@@ -153,6 +154,22 @@ static struct irq_chip s3c2412_irq_cfsdi = {
 	.unmask		= s3c2412_irq_cfsdi_unmask,
 };
 
+static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long pwrcfg;
+
+	pwrcfg = __raw_readl(S3C2412_PWRCFG);
+	if (state)
+		pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
+	else
+		pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
+	__raw_writel(pwrcfg, S3C2412_PWRCFG);
+
+	return s3c_irq_chip.set_wake(irqno, state);
+}
+
+static struct irq_chip s3c2412_irq_rtc_chip;
+
 static int s3c2412_irq_add(struct sys_device *sysdev)
 {
 	unsigned int irqno;
@@ -173,6 +190,13 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
 		set_irq_flags(irqno, IRQF_VALID);
 	}
 
+	/* change RTC IRQ's set wake method */
+
+	s3c2412_irq_rtc_chip = s3c_irq_chip;
+	s3c2412_irq_rtc_chip.set_wake = s3c2412_irq_rtc_wake;
+
+	set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 8988dac388a9..d4ffb2d98076 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -33,6 +33,8 @@
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 
+extern void s3c2412_sleep_enter(void);
+
 static void s3c2412_cpu_suspend(void)
 {
 	unsigned long tmp;
@@ -43,20 +45,7 @@ static void s3c2412_cpu_suspend(void)
 	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
 	__raw_writel(tmp, S3C2412_PWRCFG);
 
-	/* issue the standby signal into the pm unit. Note, we
-	 * issue a write-buffer drain just in case */
-
-	tmp = 0;
-
-	asm("b 1f\n\t"
-	    ".align 5\n\t"
-	    "1:\n\t"
-	    "mcr p15, 0, %0, c7, c10, 4\n\t"
-	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
-	/* we should never get past here */
-
-	panic("sleep resumed to originator?");
+	s3c2412_sleep_enter();
 }
 
 static void s3c2412_pm_prepare(void)
@@ -88,7 +77,6 @@ static struct sleep_save s3c2412_sleep[] = {
 	SAVE_ITEM(S3C2412_GPBSLPCON),
 	SAVE_ITEM(S3C2412_GPCSLPCON),
 	SAVE_ITEM(S3C2412_GPDSLPCON),
-	SAVE_ITEM(S3C2412_GPESLPCON),
 	SAVE_ITEM(S3C2412_GPFSLPCON),
 	SAVE_ITEM(S3C2412_GPGSLPCON),
 	SAVE_ITEM(S3C2412_GPHSLPCON),
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 4f92a1562d77..abf1599c9f97 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -168,6 +168,8 @@ void __init s3c2412_init_clocks(int xtal)
 
 	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
 
+	clk_mpll.rate = fclk;
+
 	tmp = __raw_readl(S3C2410_CLKDIVN);
 
 	/* work out clock scalings */
@@ -196,7 +198,7 @@ void __init s3c2412_init_clocks(int xtal)
 */
 
 struct sysdev_class s3c2412_sysclass = {
-	set_kset_name("s3c2412-core"),
+	.name = "s3c2412-core",
 };
 
 static int __init s3c2412_core_init(void)
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
new file mode 100644
index 000000000000..db32cac4199a
--- /dev/null
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2412/sleep.S
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 Power Manager low-level sleep support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-irq.h>
+
+	.text
+
+	.global	s3c2412_sleep_enter
+
+s3c2412_sleep_enter:
+	mov	r0, #0			/* argument for coprocessors */
+	ldr	r1, =S3C2410_INTPND
+	ldr	r2, =S3C2410_SRCPND
+	ldr	r3, =S3C2410_EINTPEND
+
+	teq	r0, r0
+	bl	s3c2412_sleep_enter1
+	teq	pc, r0
+	bl	s3c2412_sleep_enter1
+
+	.align	5
+
+	/* this is called twice, first with the Z flag to ensure that the
+	 * instructions have been loaded into the cache, and the second
+	 * time to try and suspend the system.
+	*/
+s3c2412_sleep_enter1:
+	mcr	p15, 0, r0, c7, c10, 4
+	mcrne	p15, 0, r0, c7, c0, 4
+
+	/* if we return from here, it is because an interrupt was
+	 * active when we tried to shutdown. Try and ack the IRQ and
+	 * retry, as simply returning causes the system to lock.
+	*/
+
+	ldrne	r9, [ r1 ]
+	strne	r9, [ r1 ]
+	ldrne	r9, [ r2 ]
+	strne	r9, [ r2 ]
+	ldrne	r9, [ r3 ]
+	strne	r9, [ r3 ]
+	bne	s3c2412_sleep_enter1
+
+	mov	pc, r14