Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

1 files changed, 50 insertions, 2 deletions

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a2328..32afd9448216 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
  *
  * Author:
  *	Juha Yrjola <juha.yrjola@nokia.com>
  *	Syed Khasim <x0khasim@ti.com>
  *
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -30,6 +32,7 @@
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
 
+#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
 #include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
-
+#endif
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 	},
 };
 #endif
+#ifdef	CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_44XX_PHYS),
+		.length		= L3_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_44XX_PHYS),
+		.length		= L4_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_44XX_PHYS),
+		.length		= L4_WK_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+		.length		= OMAP44XX_GPMC_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
+		.length		= L4_PER_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_EMU_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
+		.length		= L4_EMU_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
 
 void __init omap2_map_common_io(void)
 {
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
 	 * revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap2_sdrc_init(sp);
+#endif
 	gpmc_init();
 }