Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] fix build-breaking 7a192ec commit
  ARM: Add SMSC911X support to Overo platform (V2)
  arm: update omap_ldp defconfig to use smsc911x
  arm: update realview defconfigs to use smsc911x
  arm: update pcm037 defconfig to use smsc911x
  arm: convert omap ldp platform to use smsc911x
  arm: convert realview platform to use smsc911x
  arm: convert pcm037 platform to use smsc911x
  [ARM] 5444/1: ARM: Realview: Fix event-device multiplicators in localtimer.c
  [ARM] 5442/1: pxa/cm-x255: fix reverse RDY gpios in PCMCIA driver
  [ARM] 5441/1: Use pr_err on error paths in at91 pm
  [ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions
  [ARM] 5439/1: Do not clear bit 10 of DFSR during abort handling on ARMv6
  [ARM] 5437/1: Add documentation for "nohlt" kernel parameter
  [ARM] 5436/1: ARM: OMAP: Fix compile for rx51
  [ARM] arch_reset() now takes a second parameter
  [ARM] Kirkwood: small L2 code cleanup
  [ARM] Kirkwood: invalidate L2 cache before enabling it

1 files changed, 65 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b3f6e9d81807..b1f23bea863f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -57,6 +57,9 @@
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
 
+#define OVERO_SMSC911X_CS      5
+#define OVERO_SMSC911X_GPIO    176
+
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
@@ -116,6 +119,67 @@ static void __init overo_ads7846_init(void)
 static inline void __init overo_ads7846_init(void) { return; }
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+
+static struct resource overo_smsc911x_resources[] = {
+	{
+		.name	= "smsc911x-memory",
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config overo_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT ,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device overo_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
+	.resource	= &overo_smsc911x_resources,
+	.dev		= {
+		.platform_data = &overo_smsc911x_config,
+	},
+};
+
+static inline void __init overo_init_smsc911x(void)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
+		return;
+	}
+
+	overo_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	overo_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
+	    (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) {
+		gpio_export(OVERO_SMSC911X_GPIO, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n");
+		return;
+	}
+
+	overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
+	overo_smsc911x_resources[1].end	  = 0;
+
+	platform_device_register(&overo_smsc911x_device);
+}
+
+#else
+static inline void __init overo_init_smsc911x(void) { return; }
+#endif
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -290,6 +354,7 @@ static void __init overo_init(void)
 	overo_flash_init();
 	usb_musb_init();
 	overo_ads7846_init();
+	overo_init_smsc911x();
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&