[ARM] MV78XX0: MPP routines and definitions

This patch is composed of two new files :

- mpp.c which is mainly inspired by the same file as in mach-kirkwood

- mpp.h that is written from the documentation provided by Marvell
http://www.marvell.com/products/processors/embedded/discovery_innovation/HW_MV78100_OpenSource.pdf

Moreover, due to some implementation problem, I have
defined some MPPX_UNUSED that offer developers the possibility
to SET MPP to some unused value (such as for Buffalo WXL).

Note: This patch doesn't support MV78200 yet (only 78100 MPP lines have
been written)

Signed-off-by: Sebastien Requiem <sebastien@kolios.dk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

1 files changed, 96 insertions, 0 deletions

diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
new file mode 100644
index 000000000000..354ac514eb89
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-mv78x00/mpp.c
+ *
+ * MPP functions for Marvell MV78x00 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init mv78xx0_variant(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
+		return MPP_78100_A0_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
+			"(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS	(1 + MPP_MAX/8)
+
+void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	unsigned int variant_mask;
+	int i;
+
+	variant_mask = mv78xx0_variant();
+	if (!variant_mask)
+		return;
+
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
+	printk(KERN_DEBUG "initial MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+
+	while (*mpp_list) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > MPP_MAX) {
+			printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			printk(KERN_WARNING
+					"mv78xx0_mpp_conf: requested MPP%u config "
+					"unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		gpio_mode = 0;
+		if (*mpp_list & MPP_INPUT_MASK)
+			gpio_mode |= GPIO_INPUT_OK;
+		if (*mpp_list & MPP_OUTPUT_MASK)
+			gpio_mode |= GPIO_OUTPUT_OK;
+		if (sel != 0)
+			gpio_mode = 0;
+		orion_gpio_set_valid(num, gpio_mode);
+
+		mpp_list++;
+	}
+
+	printk(KERN_DEBUG "  final MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+}