Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...

3 files changed, 4 insertions, 12 deletions

diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 3d7bd50b9095..9088c16662e8 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -111,8 +111,6 @@ void __init lh7a40x_init_board_irq (void)
 
 MACHINE_START (KEV7A400, "Sharp KEV7a400")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= kev7a400_map_io,
 	.init_irq	= lh7a400_init_irq,
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index cb15e5d32120..7315a569aea1 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -398,8 +398,6 @@ lpd7a40x_map_io(void)
 
 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lpd7a40x_map_io,
 	.init_irq	= lh7a400_init_irq,
@@ -413,8 +411,6 @@ MACHINE_END
 
 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lpd7a40x_map_io,
 	.init_irq	= lh7a404_init_irq,
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index c0dcbbba22ba..cff33625276f 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,12 +14,10 @@
 	@ It is not known if this will be appropriate for every 40x
 	@ board.
 
-		.macro  addruart, rx, tmp
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1                 @ MMU enabled?
-		mov     \rx, #0x00000700        @ offset from base
-		orreq   \rx, \rx, #0x80000000   @ physical base
-		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.macro  addruart, rp, rv
+		mov     \rp, #0x00000700        @ offset from base
+		orr     \rv, \rp, #0xf8000000   @ virtual base
+		orr     \rp, \rp, #0x80000000   @ physical base
 		.endm
 
 		.macro  senduart,rd,rx