Merge tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Merge "ARM: imx: device tree updates for 3.17" from Shawn Guo:

The i.MX device tree updates for 3.17:
 - Add device tree sources and pin function header for i.MX6SX SoC
 - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio
   and GPIO key enabled
 - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos
   imx6dl boards, Rex Pro and Basic, Ka-Ro TX6
 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board
 - Split M28EVK and M53EVK into SoM and EVK parts
 - A few correction around SDMA, SSI and SATA device nodes
 - Add eSATA support for Cubox-i board
 - Updates on edmqmx6 to enable PCIe, I2C and CAN
 - Use DT macro for clock ID for imx27 and imx6qdl
 - Add FlexCAN support for VF610 SoC

* tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (125 commits)
  ARM: dts: vf610: add FlexCAN node
  ARM: dts: add initial Rex Basic board support
  ARM: dts: add initial Rex Pro board support
  ARM: dts: mx5: Split M53EVK into SoM and EVK parts
  ARM: dts: imx6: RIoTboard explicitly define pad settings
  ARM: dts: vf610: fix length of eshdc1 register property
  ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
  ARM: dts: imx53: correct clock-names of SATA node
  ARM: imx6: Align ssi nodes between mx6 variants
  ARM: i.MX27 clk: dts: Use clock defines in DTS files
  ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sx
  ARM: dts: imx6sx-sdb: Add audio support
  ARM: dts: imx6sx: Pass the fsl,fifo-depth property
  ARM: dts: imx6sx: Fix sdma node
  ARM: dts: imx6: edmqmx6: Add can bus
  ARM: dts: imx6: edmqmx6: Add two other i2c buses
  ARM: dts: imx6: edmqmx6: Add PCIe support
  ARM: dts: imx25-pdk: Add USB OTG support
  ARM: dts: i.MX53: add aipstz nodes
  ARM: dts: mxs: Split M28EVK into SoM and EVK parts
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 82 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
new file mode 100644
index 000000000000..c77deb3f0893
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "hardware.h"
+
+static void __init imx51_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX51);
+}
+
+/*
+ * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
+ * the Freescale marketing division. However this did not remove the
+ * hardware from the chip which still needs to be configured for proper
+ * IPU support.
+ */
+#define MX51_MIPI_HSC_BASE 0x83fdc000
+static void __init imx51_ipu_mipi_setup(void)
+{
+	void __iomem *hsc_addr;
+
+	hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K);
+	WARN_ON(!hsc_addr);
+
+	/* setup MIPI module to legacy mode */
+	__raw_writel(0xf00, hsc_addr);
+
+	/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
+	__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
+		hsc_addr + 0x800);
+
+	iounmap(hsc_addr);
+}
+
+static void __init imx51_dt_init(void)
+{
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
+	mxc_arch_reset_init_dt();
+	imx51_ipu_mipi_setup();
+	imx_src_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_full(&devinfo);
+}
+
+static void __init imx51_init_late(void)
+{
+	mx51_neon_fixup();
+	imx51_pm_init();
+}
+
+static const char * const imx51_dt_board_compat[] __initconst = {
+	"fsl,imx51",
+	NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+	.init_early	= imx51_init_early,
+	.init_irq	= tzic_init_irq,
+	.init_machine	= imx51_dt_init,
+	.init_late	= imx51_init_late,
+	.dt_compat	= imx51_dt_board_compat,
+	.restart	= mxc_restart,
+MACHINE_END