ARM: dts: imx: use nodes label in board dts

Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi.  Thus, the board
dts files become easier to read and edit with the least indentation
levels.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 47 insertions, 55 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index a42402562b7b..2dea304a7980 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -21,61 +21,6 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				uart1: serial@02020000 {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_uart1_1>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
-							1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
-							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
-							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
-							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
-							1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
-						>;
-					};
-				};
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_1>;
-				phy-mode = "rgmii";
-				status = "okay";
-			};
-
-			usdhc@02194000 { /* uSDHC2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc2_1>;
-				cd-gpios = <&gpio2 2 0>;
-				wp-gpios = <&gpio2 3 0>;
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
-				cd-gpios = <&gpio2 0 0>;
-				wp-gpios = <&gpio2 1 0>;
-				status = "okay";
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -92,3 +37,50 @@
 		};
 	};
 };
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
+				1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
+				1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+				1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+				1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+				1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	cd-gpios = <&gpio2 2 0>;
+	wp-gpios = <&gpio2 3 0>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	cd-gpios = <&gpio2 0 0>;
+	wp-gpios = <&gpio2 1 0>;
+	status = "okay";
+};