summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/exynos4.dtsi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-02 16:34:00 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-02 16:34:00 -0700
commit755a9ba7bf24a45b6dbf8bb15a5a56c8ed12461a (patch)
treead98ee0f336630144e571c9499453c571c6b02c7 /arch/arm/boot/dts/exynos4.dtsi
parent7477838f2e481256a40e0c44b92f9bccb065bc51 (diff)
parent0f16aa3c24a216d14d7f0587e1cbd2c1b51a38f3 (diff)
downloadtalos-op-linux-755a9ba7bf24a45b6dbf8bb15a5a56c8ed12461a.tar.gz
talos-op-linux-755a9ba7bf24a45b6dbf8bb15a5a56c8ed12461a.zip
Merge tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull ARM SoC devicetree updates from Olof Johansson: "As with previous release, this continues to be among the largest branches we merge, with lots of new contents. New things for this release are among other things: - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request) - Qualcomm APQ8064 and APQ8084 SoCs and eval boards - Nvidia Jetson TK1 development board (Tegra T124-based) Two new SoCs that didn't need enough new platform code to stand out enough for me to notice when writing the SoC tag, but that adds new DT contents are: - TI DRA72 - Marvell Berlin 2Q" * tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits) ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards ARM: dts: qcom: Add APQ8084-MTP board support ARM: dts: qcom: Add APQ8084 SoC support ...
Diffstat (limited to 'arch/arm/boot/dts/exynos4.dtsi')
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi66
1 files changed, 65 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 58ff8e28c74f..b8ece4be41ca 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -20,6 +20,7 @@
*/
#include <dt-bindings/clock/exynos4.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
#include "skeleton.dtsi"
/ {
@@ -45,6 +46,23 @@
fimc3 = &fimc_3;
};
+ clock_audss: clock-controller@03810000 {
+ compatible = "samsung,exynos4210-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ };
+
+ i2s0: i2s@03830000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0x03830000 0x100>;
+ clocks = <&clock_audss EXYNOS_I2S_BUS>;
+ clock-names = "iis";
+ dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
+ dma-names = "tx", "rx", "tx-sec";
+ samsung,idma-addr = <0x03000000>;
+ status = "disabled";
+ };
+
chipid@10000000 {
compatible = "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
@@ -110,6 +128,11 @@
reg = <0x10010000 0x400>;
};
+ pmu_system_controller: system-controller@10020000 {
+ compatible = "samsung,exynos4210-pmu", "syscon";
+ reg = <0x10020000 0x4000>;
+ };
+
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
@@ -117,7 +140,7 @@
samsung,power-domain = <&pd_lcd0>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
- clocks = <&clock 286>, <&clock 143>;
+ clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
clock-names = "bus_clk", "pll_clk";
status = "disabled";
#address-cells = <1>;
@@ -271,6 +294,27 @@
status = "disabled";
};
+ exynos_usbphy: exynos-usbphy@125B0000 {
+ compatible = "samsung,exynos4210-usb2-phy";
+ reg = <0x125B0000 0x100>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+ clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
+ clock-names = "phy", "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ hsotg@12480000 {
+ compatible = "samsung,s3c6400-hsotg";
+ reg = <0x12480000 0x20000>;
+ interrupts = <0 71 0>;
+ clocks = <&clock CLK_USB_DEVICE>;
+ clock-names = "otg";
+ phys = <&exynos_usbphy 0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
@@ -289,6 +333,26 @@
status = "disabled";
};
+ i2s1: i2s@13960000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0x13960000 0x100>;
+ clocks = <&clock CLK_I2S1>;
+ clock-names = "iis";
+ dmas = <&pdma1 12>, <&pdma1 11>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2s2: i2s@13970000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0x13970000 0x100>;
+ clocks = <&clock CLK_I2S2>;
+ clock-names = "iis";
+ dmas = <&pdma0 14>, <&pdma0 13>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
mfc: codec@13400000 {
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
OpenPOWER on IntegriCloud