bgmac: connect to PHY and make use of PHY device

We were already registering MDIO bus, but we were not connecting bgmac
to the PHY. Add proper call and implement adjust link function to switch
MAC into requested state.
At the same time it's possible to drop our internal PHY management.
This is a "standard" PHY, so the "Generic PHY" driver works perfectly
fine with this. Don't duplicate the code.
Finally make use of phy_ethtool_[gs]set functions instead implementing
them from scratch.

This change was successfully tested on BCM5357. I was able to
autonegotiate 1000Mb/s full duplex, as well as force any of the
10/100/1000 half/full modes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 64 insertions, 138 deletions

diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index e2aa09ce6af7..0452937227ff 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -682,70 +682,6 @@ static int bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
 	return 0;
 }
 
-/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
-static void bgmac_phy_force(struct bgmac *bgmac)
-{
-	u16 ctl;
-	u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB |
-		     BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX);
-
-	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
-		return;
-
-	if (bgmac->autoneg)
-		return;
-
-	ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL);
-	ctl &= mask;
-	if (bgmac->full_duplex)
-		ctl |= BGMAC_PHY_CTL_DUPLEX;
-	if (bgmac->speed == BGMAC_SPEED_100)
-		ctl |= BGMAC_PHY_CTL_SPEED_100;
-	else if (bgmac->speed == BGMAC_SPEED_1000)
-		ctl |= BGMAC_PHY_CTL_SPEED_1000;
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl);
-}
-
-/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */
-static void bgmac_phy_advertise(struct bgmac *bgmac)
-{
-	u16 adv;
-
-	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
-		return;
-
-	if (!bgmac->autoneg)
-		return;
-
-	/* Adv selected 10/100 speeds */
-	adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV);
-	adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL |
-		 BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL);
-	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
-		adv |= BGMAC_PHY_ADV_10HALF;
-	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
-		adv |= BGMAC_PHY_ADV_100HALF;
-	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
-		adv |= BGMAC_PHY_ADV_10FULL;
-	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
-		adv |= BGMAC_PHY_ADV_100FULL;
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv);
-
-	/* Adv selected 1000 speeds */
-	adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2);
-	adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL);
-	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
-		adv |= BGMAC_PHY_ADV2_1000HALF;
-	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
-		adv |= BGMAC_PHY_ADV2_1000FULL;
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv);
-
-	/* Restart */
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
-			bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) |
-			BGMAC_PHY_CTL_RESTART);
-}
-
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
 static void bgmac_phy_init(struct bgmac *bgmac)
 {
@@ -876,19 +812,28 @@ static void bgmac_clear_mib(struct bgmac *bgmac)
 }
 
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
-static void bgmac_speed(struct bgmac *bgmac, int speed)
+static void bgmac_mac_speed(struct bgmac *bgmac)
 {
 	u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
 	u32 set = 0;
 
-	if (speed & BGMAC_SPEED_10)
+	switch (bgmac->mac_speed) {
+	case SPEED_10:
 		set |= BGMAC_CMDCFG_ES_10;
-	if (speed & BGMAC_SPEED_100)
+		break;
+	case SPEED_100:
 		set |= BGMAC_CMDCFG_ES_100;
-	if (speed & BGMAC_SPEED_1000)
+		break;
+	case SPEED_1000:
 		set |= BGMAC_CMDCFG_ES_1000;
-	if (!bgmac->full_duplex)
+		break;
+	default:
+		bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed);
+	}
+
+	if (bgmac->mac_duplex == DUPLEX_HALF)
 		set |= BGMAC_CMDCFG_HD;
+
 	bgmac_cmdcfg_maskset(bgmac, mask, set, true);
 }
 
@@ -897,10 +842,9 @@ static void bgmac_miiconfig(struct bgmac *bgmac)
 	u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
 			BGMAC_DS_MM_SHIFT;
 	if (imode == 0 || imode == 1) {
-		if (bgmac->autoneg)
-			bgmac_speed(bgmac, BGMAC_SPEED_100);
-		else
-			bgmac_speed(bgmac, bgmac->speed);
+		bgmac->mac_speed = SPEED_100;
+		bgmac->mac_duplex = DUPLEX_FULL;
+		bgmac_mac_speed(bgmac);
 	}
 }
 
@@ -1108,13 +1052,6 @@ static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
 
 	bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
 
-	if (!bgmac->autoneg) {
-		bgmac_speed(bgmac, bgmac->speed);
-		bgmac_phy_force(bgmac);
-	} else if (bgmac->speed) { /* if there is anything to adv */
-		bgmac_phy_advertise(bgmac);
-	}
-
 	if (full_init) {
 		bgmac_dma_init(bgmac);
 		if (1) /* FIXME: is there any case we don't want IRQs? */
@@ -1294,61 +1231,16 @@ static int bgmac_get_settings(struct net_device *net_dev,
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
 
-	cmd->supported = SUPPORTED_10baseT_Half |
-			 SUPPORTED_10baseT_Full |
-			 SUPPORTED_100baseT_Half |
-			 SUPPORTED_100baseT_Full |
-			 SUPPORTED_1000baseT_Half |
-			 SUPPORTED_1000baseT_Full |
-			 SUPPORTED_Autoneg;
-
-	if (bgmac->autoneg) {
-		WARN_ON(cmd->advertising);
-		if (bgmac->full_duplex) {
-			if (bgmac->speed & BGMAC_SPEED_10)
-				cmd->advertising |= ADVERTISED_10baseT_Full;
-			if (bgmac->speed & BGMAC_SPEED_100)
-				cmd->advertising |= ADVERTISED_100baseT_Full;
-			if (bgmac->speed & BGMAC_SPEED_1000)
-				cmd->advertising |= ADVERTISED_1000baseT_Full;
-		} else {
-			if (bgmac->speed & BGMAC_SPEED_10)
-				cmd->advertising |= ADVERTISED_10baseT_Half;
-			if (bgmac->speed & BGMAC_SPEED_100)
-				cmd->advertising |= ADVERTISED_100baseT_Half;
-			if (bgmac->speed & BGMAC_SPEED_1000)
-				cmd->advertising |= ADVERTISED_1000baseT_Half;
-		}
-	} else {
-		switch (bgmac->speed) {
-		case BGMAC_SPEED_10:
-			ethtool_cmd_speed_set(cmd, SPEED_10);
-			break;
-		case BGMAC_SPEED_100:
-			ethtool_cmd_speed_set(cmd, SPEED_100);
-			break;
-		case BGMAC_SPEED_1000:
-			ethtool_cmd_speed_set(cmd, SPEED_1000);
-			break;
-		}
-	}
-
-	cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-
-	cmd->autoneg = bgmac->autoneg;
-
-	return 0;
+	return phy_ethtool_gset(bgmac->phy_dev, cmd);
 }
 
-#if 0
 static int bgmac_set_settings(struct net_device *net_dev,
 			      struct ethtool_cmd *cmd)
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
 
-	return -1;
+	return phy_ethtool_sset(bgmac->phy_dev, cmd);
 }
-#endif
 
 static void bgmac_get_drvinfo(struct net_device *net_dev,
 			      struct ethtool_drvinfo *info)
@@ -1359,6 +1251,7 @@ static void bgmac_get_drvinfo(struct net_device *net_dev,
 
 static const struct ethtool_ops bgmac_ethtool_ops = {
 	.get_settings		= bgmac_get_settings,
+	.set_settings		= bgmac_set_settings,
 	.get_drvinfo		= bgmac_get_drvinfo,
 };
 
@@ -1377,9 +1270,35 @@ static int bgmac_mii_write(struct mii_bus *bus, int mii_id, int regnum,
 	return bgmac_phy_write(bus->priv, mii_id, regnum, value);
 }
 
+static void bgmac_adjust_link(struct net_device *net_dev)
+{
+	struct bgmac *bgmac = netdev_priv(net_dev);
+	struct phy_device *phy_dev = bgmac->phy_dev;
+	bool update = false;
+
+	if (phy_dev->link) {
+		if (phy_dev->speed != bgmac->mac_speed) {
+			bgmac->mac_speed = phy_dev->speed;
+			update = true;
+		}
+
+		if (phy_dev->duplex != bgmac->mac_duplex) {
+			bgmac->mac_duplex = phy_dev->duplex;
+			update = true;
+		}
+	}
+
+	if (update) {
+		bgmac_mac_speed(bgmac);
+		phy_print_status(phy_dev);
+	}
+}
+
 static int bgmac_mii_register(struct bgmac *bgmac)
 {
 	struct mii_bus *mii_bus;
+	struct phy_device *phy_dev;
+	char bus_id[MII_BUS_ID_SIZE + 3];
 	int i, err = 0;
 
 	mii_bus = mdiobus_alloc();
@@ -1411,8 +1330,22 @@ static int bgmac_mii_register(struct bgmac *bgmac)
 
 	bgmac->mii_bus = mii_bus;
 
+	/* Connect to the PHY */
+	snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
+		 bgmac->phyaddr);
+	phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
+			      PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phy_dev)) {
+		bgmac_err(bgmac, "PHY connecton failed\n");
+		err = PTR_ERR(phy_dev);
+		goto err_unregister_bus;
+	}
+	bgmac->phy_dev = phy_dev;
+
 	return err;
 
+err_unregister_bus:
+	mdiobus_unregister(mii_bus);
 err_free_irq:
 	kfree(mii_bus->irq);
 err_free_bus:
@@ -1467,9 +1400,6 @@ static int bgmac_probe(struct bcma_device *core)
 	bcma_set_drvdata(core, bgmac);
 
 	/* Defaults */
-	bgmac->autoneg = true;
-	bgmac->full_duplex = true;
-	bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000;
 	memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
 
 	/* On BCM4706 we need common core to access PHY */
diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
index 66c8afbdc8c7..550f2a8e85a9 100644
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -342,10 +342,6 @@
 #define BGMAC_CHIPCTL_1_SW_TYPE_RGMII		0x000000C0
 #define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS		0x00010000
 
-#define BGMAC_SPEED_10				0x0001
-#define BGMAC_SPEED_100				0x0002
-#define BGMAC_SPEED_1000			0x0004
-
 #define BGMAC_WEIGHT	64
 
 #define ETHER_MAX_LEN   1518
@@ -402,6 +398,7 @@ struct bgmac {
 	struct net_device *net_dev;
 	struct napi_struct napi;
 	struct mii_bus *mii_bus;
+	struct phy_device *phy_dev;
 
 	/* DMA */
 	struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];
@@ -416,10 +413,9 @@ struct bgmac {
 	u32 int_mask;
 	u32 int_status;
 
-	/* Speed-related */
-	int speed;
-	bool autoneg;
-	bool full_duplex;
+	/* Current MAC state */
+	int mac_speed;
+	int mac_duplex;
 
 	u8 phyaddr;
 	bool has_robosw;