talos-op-linux/kernel/time/tick-common.c, branch v4.17

Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME

2018-04-26T12:53:32+00:00

Revert commits 92af4dcb4e1c ("tracing: Unify the "boot" and "mono" tracing clocks") 127bfa5f4342 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior") 7250a4047aa6 ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior") d6c7270e913d ("timekeeping: Remove boot time specific code") f2d6fdbfd238 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior") d6ed449afdb3 ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock") 72199320d49d ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock") As stated in the pull request for the unification of CLOCK_MONOTONIC and CLOCK_BOOTTIME, it was clear that we might have to revert the change. As reported by several folks systemd and other applications rely on the documented behaviour of CLOCK_MONOTONIC on Linux and break with the above changes. After resume daemons time out and other timeout related issues are observed. Rafael compiled this list: * systemd kills daemons on resume, after >WatchdogSec seconds of suspending (Genki Sky). [Verified that that's because systemd uses CLOCK_MONOTONIC and expects it to not include the suspend time.] * systemd-journald misbehaves after resume: systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal corrupted or uncleanly shut down, renaming and replacing. (Mike Galbraith). * NetworkManager reports "networking disabled" and networking is broken after resume 50% of the time (Pavel). [May be because of systemd.] * MATE desktop dims the display and starts the screensaver right after system resume (Pavel). * Full system hang during resume (me). [May be due to systemd or NM or both.] That happens on debian and open suse systems. It's sad, that these problems were neither catched in -next nor by those folks who expressed interest in this change. Reported-by: Rafael J. Wysocki Reported-by: Genki Sky , Reported-by: Pavel Machek Signed-off-by: Thomas Gleixner Cc: Dmitry Torokhov Cc: John Stultz Cc: Jonathan Corbet Cc: Kevin Easton Cc: Linus Torvalds Cc: Mark Salyzyn Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Petr Mladek Cc: Prarit Bhargava Cc: Sergey Senozhatsky Cc: Steven Rostedt

timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock

2018-03-13T06:34:22+00:00

The MONOTONIC clock is not fast forwarded by the time spent in suspend on resume. This is only done for the BOOTTIME clock. The reason why the MONOTONIC clock is not forwarded is historical: the original Linux implementation was using jiffies as a base for the MONOTONIC clock and jiffies have never been advanced after resume. At some point when timekeeping was unified in the core code, the MONONOTIC clock was advanced after resume which also advanced jiffies causing interesting side effects. As a consequence the the MONOTONIC clock forwarding was disabled again and the BOOTTIME clock was introduced, which allows to read time since boot. Back then it was not possible to completely distangle the MONOTONIC clock and jiffies because there were still interfaces which exposed the MONOTONIC clock behaviour based on the timer wheel and therefore jiffies. As of today none of the MONOTONIC clock facilities depends on jiffies anymore so the forwarding can be done seperately. This is achieved by forwarding the variables which are used for the jiffies update after resume before the tick is restarted, In timekeeping resume, the change is rather simple. Instead of updating the offset between the MONOTONIC clock and the REALTIME/BOOTTIME clocks, advance the time keeper base for the MONOTONIC and the MONOTONIC_RAW clocks by the time spent in suspend. The MONOTONIC clock is now the same as the BOOTTIME clock and the offset between the REALTIME and the MONOTONIC clocks is the same as before suspend. There might be side effects in applications, which rely on the (unfortunately) well documented behaviour of the MONOTONIC clock, but the downsides of the existing behaviour are probably worse. There is one obvious issue. Up to now it was possible to retrieve the time spent in suspend by observing the delta between the MONOTONIC clock and the BOOTTIME clock. This is not longer available, but the previously introduced mechanism to read the active non-suspended monotonic time can mitigate that in a detectable fashion. Signed-off-by: Thomas Gleixner Cc: Andrew Morton Cc: Dmitry Torokhov Cc: John Stultz Cc: Jonathan Corbet Cc: Kevin Easton Cc: Linus Torvalds Cc: Mark Salyzyn Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Petr Mladek Cc: Prarit Bhargava Cc: Sergey Senozhatsky Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20180301165150.062975504@linutronix.de Signed-off-by: Ingo Molnar

ktime: Cleanup ktime_set() usage

2016-12-25T16:21:22+00:00

ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra

clockevents: Remove unused set_mode() callback

2015-09-14T09:00:55+00:00

All users are migrated to the per-state callbacks, get rid of the unused interface and the core support code. Signed-off-by: Viresh Kumar Signed-off-by: Thomas Gleixner Cc: linaro-kernel@lists.linaro.org Cc: John Stultz Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/fd60de14cf6d125489c031207567bb255ad946f6.1441943991.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar

clockevents: Drop redundant cpumask check in tick_check_new_device()

2015-08-01T10:00:13+00:00

The same check is performed by tick_check_percpu(). Signed-off-by: Luiz Capitulino Link: http://lkml.kernel.org/r/20150729151417.069d1bb0@redhat.com Signed-off-by: Thomas Gleixner

tick: Move the export of tick_broadcast_oneshot_control to the proper place

2015-07-14T10:01:04+00:00

tick_broadcast_oneshot_control got moved from tick-broadcast to tick-common, but the export stayed in the old place. Fix it up. Fixes: f32dd1170511 'tick/broadcast: Make idle check independent from mode and config' Reported-by: Ingo Molnar Signed-off-by: Thomas Gleixner

tick/broadcast: Make idle check independent from mode and config

2015-07-07T16:46:47+00:00

Currently the broadcast busy check, which prevents the idle code from going into deep idle, works only in one shot mode. If NOHZ and HIGHRES are off (config or command line) there is no sanity check at all, so under certain conditions cpus are allowed to go into deep idle, where the local timer stops, and are not woken up again because there is no broadcast timer installed or a hrtimer based broadcast device is not evaluated. Move tick_broadcast_oneshot_control() into the common code and provide proper subfunctions for the various config combinations. The common check in tick_broadcast_oneshot_control() is for the C3STOP misfeature flag of the local clock event device. If its not set, idle can proceed. If set, further checks are necessary. Provide checks for the trivial cases: - If broadcast is disabled in the config, then return busy - If oneshot mode (NOHZ/HIGHES) is disabled in the config, return busy if the broadcast device is hrtimer based. - If oneshot mode is enabled in the config call the original tick_broadcast_oneshot_control() function. That function needs extra checks which will be implemented in seperate patches. [ Split out from a larger combo patch ] Reported-and-tested-by: Sudeep Holla Signed-off-by: Thomas Gleixner Cc: Suzuki Poulose Cc: Lorenzo Pieralisi Cc: Catalin Marinas Cc: Rafael J. Wysocki Cc: Peter Zijlstra Cc: Preeti U Murthy Cc: Ingo Molnar Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos

Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2015-06-23T21:18:07+00:00

Pull power management and ACPI updates from Rafael Wysocki: "The rework of backlight interface selection API from Hans de Goede stands out from the number of commits and the number of affected places perspective. The cpufreq core fixes from Viresh Kumar are quite significant too as far as the number of commits goes and because they should reduce CPU online/offline overhead quite a bit in the majority of cases. From the new featues point of view, the ACPICA update (to upstream revision 20150515) adding support for new ACPI 6 material to ACPICA is the one that matters the most as some new significant features will be based on it going forward. Also included is an update of the ACPI device power management core to follow ACPI 6 (which in turn reflects the Windows' device PM implementation), a PM core extension to support wakeup interrupts in a more generic way and support for the ACPI _CCA device configuration object. The rest is mostly fixes and cleanups all over and some documentation updates, including new DT bindings for Operating Performance Points. There is one fix for a regression introduced in the 4.1 cycle, but it adds quite a number of lines of code, it wasn't really ready before Thursday and you were on vacation, so I refrained from pushing it on the last minute for 4.1. Specifics: - ACPICA update to upstream revision 20150515 including basic support for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM, FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore, Lv Zheng). - ACPI device power management core code update to follow ACPI 6 which reflects the ACPI device power management implementation in Windows (Rafael J Wysocki). - rework of the backlight interface selection logic to reduce the number of kernel command line options and improve the handling of DMI quirks that may be involved in that and to make the code generally more straightforward (Hans de Goede). - fixes for the ACPI Embedded Controller (EC) driver related to the handling of EC transactions (Lv Zheng). - fix for a regression related to the ACPI resources management and resulting from a recent change of ACPI initialization code ordering (Rafael J Wysocki). - fix for a system initialization regression related to ACPI introduced during the 3.14 cycle and caused by running the code that switches the platform over to the ACPI mode too early in the initialization sequence (Rafael J Wysocki). - support for the ACPI _CCA device configuration object related to DMA cache coherence (Suravee Suthikulpanit). - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov). - ACPI battery driver cleanups (Luis Henriques, Mathias Krause). - ACPI processor driver cleanups (Hanjun Guo). - cleanups and documentation update related to the ACPI device properties interface based on _DSD (Rafael J Wysocki). - ACPI device power management fixes (Rafael J Wysocki). - assorted cleanups related to ACPI (Dominik Brodowski, Fabian Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki). - fix for a long-standing issue causing General Protection Faults to be generated occasionally on return to user space after resume from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar). - fix to make the suspend core code return -EBUSY consistently in all cases when system suspend is aborted due to wakeup detection (Ruchi Kandoi). - support for automated device wakeup IRQ handling allowing drivers to make their PM support more starightforward (Tony Lindgren). - new tracepoints for suspend-to-idle tracing and rework of the prepare/complete callbacks tracing in the PM core (Todd E Brandt, Rafael J Wysocki). - wakeup sources framework enhancements (Jin Qian). - new macro for noirq system PM callbacks (Grygorii Strashko). - assorted cleanups related to system suspend (Rafael J Wysocki). - cpuidle core cleanups to make the code more efficient (Rafael J Wysocki). - powernv/pseries cpuidle driver update (Shilpasri G Bhat). - cpufreq core fixes related to CPU online/offline that should reduce the overhead of these operations quite a bit, unless the CPU in question is physically going away (Viresh Kumar, Saravana Kannan). - serialization of cpufreq governor callbacks to avoid race conditions in some cases (Viresh Kumar). - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit Bhargava, Joe Konno). - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep Holla, Felipe Balbi, Tang Yuantian). - assorted cleanups in cpufreq drivers and core (Shailendra Verma, Fabian Frederick, Wang Long). - new Device Tree bindings for representing Operating Performance Points (Viresh Kumar). - updates for the common clock operations support code in the PM core (Rajendra Nayak, Geert Uytterhoeven). - PM domains core code update (Geert Uytterhoeven). - Intel Knights Landing support for the RAPL (Running Average Power Limit) power capping driver (Dasaratharaman Chandramouli). - fixes related to the floor frequency setting on Atom SoCs in the RAPL power capping driver (Ajay Thomas). - runtime PM framework documentation update (Ben Dooks). - cpupower tool fix (Herton R Krzesinski)" * tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits) cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state x86: Load __USER_DS into DS/ES after resume PM / OPP: Add binding for 'opp-suspend' PM / OPP: Allow multiple OPP tables to be passed via DT PM / OPP: Add new bindings to address shortcomings of existing bindings ACPI: Constify ACPI device IDs in documentation ACPI / enumeration: Document the rules regarding the PRP0001 device ID ACPI / video: Make acpi_video_unregister_backlight() private acpi-video-detect: Remove old API toshiba-acpi: Port to new backlight interface selection API thinkpad-acpi: Port to new backlight interface selection API sony-laptop: Port to new backlight interface selection API samsung-laptop: Port to new backlight interface selection API msi-wmi: Port to new backlight interface selection API msi-laptop: Port to new backlight interface selection API intel-oaktrail: Port to new backlight interface selection API ideapad-laptop: Port to new backlight interface selection API fujitsu-laptop: Port to new backlight interface selection API eeepc-laptop: Port to new backlight interface selection API dell-wmi: Port to new backlight interface selection API ...

clockevents: Use set/get state helper functions

2015-06-02T12:40:48+00:00

Signed-off-by: Thomas Gleixner Cc: Viresh Kumar Cc: Peter Zijlstra

clockevents: Provide functions to set and get the state

2015-06-02T12:40:47+00:00

We want to rename dev->state, so provide proper get and set functions. Rename clockevents_set_state() to clockevents_switch_state() to avoid confusion. Signed-off-by: Thomas Gleixner Cc: Viresh Kumar Cc: Peter Zijlstra