talos-op-linux/include/linux, branch v4.2.2

jbd2: avoid infinite loop when destroying aborted journal

2015-09-29T17:33:37+00:00

commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream. Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal superblock fails" changed jbd2_cleanup_journal_tail() to return EIO when the journal is aborted. That makes logic in jbd2_log_do_checkpoint() bail out which is fine, except that jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make a progress in cleaning the journal. Without it jbd2_journal_destroy() just loops in an infinite loop. Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of jbd2_log_do_checkpoint() fails with error. Reported-by: Eryu Guan Tested-by: Eryu Guan Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

SUNRPC: Ensure that we wait for connections to complete before retrying

2015-09-29T17:33:31+00:00

commit 0fdea1e8a2853f79d39b8555cc9de16a7e0ab26f upstream. Commit 718ba5b87343, moved the responsibility for unlocking the socket to xs_tcp_setup_socket, meaning that the socket will be unlocked before we know that it has finished trying to connect. The following patch is based on an initial patch by Russell King to ensure that we delay clearing the XPRT_CONNECTING flag until we either know that we failed to initiate a connection attempt, or the connection attempt itself failed. Fixes: 718ba5b87343 ("SUNRPC: Add helpers to prevent socket create from racing") Reported-by: Russell King Reported-by: Russell King Tested-by: Russell King Tested-by: Benjamin Coddington Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman

svcrdma: Change maximum server payload back to RPCSVC_MAXPAYLOAD

2015-09-29T17:33:30+00:00

commit cc9a903d915c21626b6b2fbf8ed0ff16a7f82210 upstream. Both commit 0380a3f375 ("svcrdma: Add a separate "max data segs" macro for svcrdma") and commit 7e5be28827bf ("svcrdma: advertise the correct max payload") are incorrect. This commit reverts both changes, restoring the server's maximum payload size to 1MB. Commit 7e5be28827bf based the server's maximum payload on the _client's_ RPCRDMA_MAX_DATA_SEGS value. That was wrong. Commit 0380a3f375 tried to fix this so that the client maximum payload size could be raised without affecting the server, but managed to confuse matters more on the server side. More importantly, limiting the advertised maximum payload size was meant to be a workaround, not the actual fix. We need to revisit https://bugzilla.linux-nfs.org/show_bug.cgi?id=270 A Linux client on a platform with 64KB pages can overrun and crash an x86_64 NFS/RDMA server when the r/wsize is 1MB. An x86/64 Linux client seems to work fine using 1MB reads and writes when the Linux server's maximum payload size is restored to 1MB. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=270 Fixes: 0380a3f375 ("svcrdma: Add a separate "max data segs" macro") Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman

nfc: st-nci: Remove duplicate file platform_data/st_nci.h

2015-09-29T17:33:14+00:00

commit 76b733d15874128ee2d0365b4cbe7d51decd8d37 upstream. commit "nfc: st-nci: Rename st21nfcb to st-nci" adds include/linux/platform_data/st_nci.h duplicated with include/linux/platform_data/st-nci.h. Only drivers/nfc/st-nci/i2c.c uses platform_data/st_nci.h. Reported-by: Hauke Mehrtens Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman

fs: create and use seq_show_option for escaping

2015-09-21T17:10:59+00:00

commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream. Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: Kees Cook Acked-by: Serge Hallyn Acked-by: Jan Kara Acked-by: Paul Moore Cc: J. R. Okajima Signed-off-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ACPI, PCI: Penalize legacy IRQ used by ACPI SCI

2015-09-21T17:10:58+00:00

commit 5d0ddfebb93069061880fc57ee4ba7246bd1e1ee upstream. Nick Meier reported a regression with HyperV that " After rebooting the VM, the following messages are logged in syslog when trying to load the tulip driver: tulip: Linux Tulip drivers version 1.1.15 (Feb 27, 2007) tulip: 0000:00:0a.0: PCI INT A: failed to register GSI tulip: Cannot enable tulip board #0, aborting tulip: probe of 0000:00:0a.0 failed with error -16 Errors occur in 3.19.0 kernel Works in 3.17 kernel. " According to the ACPI dump file posted by Nick at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 The ACPI MADT table includes an interrupt source overridden entry for ACPI SCI: [236h 0566 1] Subtable Type : 02 [237h 0567 1] Length : 0A [238h 0568 1] Bus : 00 [239h 0569 1] Source : 09 [23Ah 0570 4] Interrupt : 00000009 [23Eh 0574 2] Flags (decoded below) : 000D Polarity : 1 Trigger Mode : 3 And in DSDT table, we have _PRT method to define PCI interrupts, which eventually goes to: Name (PRSA, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSB, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSC, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSD, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) According to the MADT and DSDT tables, IRQ 9 may be used for: 1) ACPI SCI in level, high mode 2) PCI legacy IRQ in level, low mode So there's a conflict in polarity setting for IRQ 9. Prior to commit cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI"), ACPI SCI is handled specially and there's no check for conflicts between ACPI SCI and PCI legagy IRQ. And it seems that the HyperV hypervisor doesn't make use of the polarity configuration in IOAPIC entry, so it just works. Commit cd68f6bd53cf gets rid of the specially handling of ACPI SCI, and then the pin attribute checking code discloses the conflicts between ACPI SCI and PCI legacy IRQ on HyperV virtual machine, and rejects the request to assign IRQ9 to PCI devices. So penalize legacy IRQ used by ACPI SCI and mark it unusable if ACPI SCI attributes conflict with PCI IRQ attributes. Please refer to following links for more information: https://bugzilla.kernel.org/show_bug.cgi?id=101301 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 Fixes: cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI") Reported-and-tested-by: Nick Meier Acked-by: Thomas Gleixner Signed-off-by: Jiang Liu Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PCI: Add dev_flags bit to access VPD through function 0

2015-09-21T17:10:48+00:00

commit 932c435caba8a2ce473a91753bad0173269ef334 upstream. Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through function 0 to provide VPD access on other functions. This is for hardware devices that provide copies of the same VPD capability registers in multiple functions. Because the kernel expects that each function has its own registers, both the locking and the state tracking are affected by VPD accesses to different functions. On such devices for example, if a VPD write is performed on function 0, *any* later attempt to read VPD from any other function of that device will hang. This has to do with how the kernel tracks the expected value of the F bit per function. Concurrent accesses to different functions of the same device can not only hang but also corrupt both read and write VPD data. When hangs occur, typically the error message: vpd r/w failed. This is likely a firmware bug on this device. will be seen. Never set this bit on function 0 or there will be an infinite recursion. Signed-off-by: Mark Rustad Signed-off-by: Bjorn Helgaas Acked-by: Alexander Duyck Signed-off-by: Greg Kroah-Hartman

iio: Add inverse unit conversion macros

2015-09-21T17:10:44+00:00

commit c689a923c867eac40ed3826c1d9328edea8b6bc7 upstream. Add inverse unit conversion macro to convert from standard IIO units to units that might be used by some devices. Those are useful in combination with scale factors that are specified as IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will contain the maximum raw value the sensor will generate and the numerator the value it maps to in a specific unit. Sometimes datasheets specify those in different units than the standard IIO units (e.g. degree/s instead of rad/s) and so we need to do a unit conversion. From a mathematical point of view it does not make a difference whether we apply the unit conversion to the numerator or the inverse unit conversion to the denominator since (x / y) / z = x / (y * z). But as the denominator is typically a larger value and we are rounding both the numerator and denominator to integer values using the later method gives us a better precision (E.g. the relative error is smaller if we round 8000.3 to 8000 rather than rounding 8.3 to 8). This is where in inverse unit conversion macros will be used. Marked for stable as used by some upcoming fixes. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

PCI: Make pci_msi_setup_pci_dev() non-static for use by arch code

2015-08-26T11:40:49+00:00

Commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") changed the location of the code that initialises dev->msi_cap/msix_cap and then disables MSI/MSI-X interrupts at PCI probe time in devices that have this flag set. It moved the code from pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(), called by pci_setup_device(). The pseries PCI probing code does not call pci_setup_device(), so since the aforementioned commit the function pci_msi_setup_pci_dev() is not called and MSI/MSI-X interrupts are left enabled. Additionally because dev->msi_cap/msix_cap are not initialised no driver can ever enable MSI/MSI-X. To fix this, the pseries PCI probe should manually call pci_msi_setup_pci_dev(), so this patch makes it non-static. Fixes: 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Update change log to mention dev->msi_cap/msix_cap] Signed-off-by: Guilherme G. Piccoli Signed-off-by: Michael Ellerman

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-08-22T14:45:36+00:00

Pull irq fixes from Thomas Gleixner: "A series of small fixlets for a regression visible on OMAP devices caused by the conversion of the OMAP interrupt chips to hierarchical interrupt domains. Mostly one liners on the driver side plus a small helper function in the core to avoid open coded mess in the drivers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Restore set_wake functionality irqchip/crossbar: Restore the mask on suspend behaviour ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism irqchip/crossbar: Restore the irq_set_type() mechanism genirq: Introduce irq_chip_set_type_parent() helper genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy