talos-op-linux/include/linux/platform_data/mmc-esdhc-imx.h, branch v5.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441

2019-06-05T15:37:17+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Armijn Hemel Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: imx: Use the slot GPIO descriptor

2018-12-17T07:26:24+00:00

Simplify things by making the i.MX SDHCI driver just use slot GPIO with descriptors instead of passing around the global GPIO numbers that we want to get rid of. As it turns out, just one single board is using the platform data to pass in GPIOs numbers for CD and WP, so we augment this to use a machine descriptor table instead. Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Bartosz Golaszewski Signed-off-by: Linus Walleij Reviewed-by: Dong Aisheng Signed-off-by: Ulf Hansson

mmc: sdhci-esdhc-imx: get rid of support_vsel

2018-07-16T09:21:45+00:00

The field support_vsel is currently only used in the device tree case. Get rid of it. No change in behavior. Signed-off-by: Stefan Agner Signed-off-by: Ulf Hansson

mmc: sdhci-esdhc-imx: support setting tuning start point

2016-07-25T08:34:54+00:00

The delay cells of some SoCs may have less delay per one cell, for such SoCs, user could set the start delay cell point to bypass the first a few meaningless tuning commands. Acked-by: Adrian Hunter Signed-off-by: Dong Aisheng Signed-off-by: Ulf Hansson

mmc: sdhci-esdhc-imx: add tuning-step setting support

2015-08-27T12:50:50+00:00

tuning-step is the delay cell steps in tuning procedure. The default value of tuning-step is 1. Some boards or cards need another value to pass the tuning procedure. For example, imx7d-sdb board need the tuning-step value as 2, otherwise it can't pass the tuning procedure. So this patch add the tuning-step setting in driver, so that user can set the tuning-step value in dts. Signed-off-by: Haibo Chen Acked-by: Dong Aisheng Signed-off-by: Ulf Hansson

mmc: sdhci-esdhc-imx: clear f_max in boarddata

2015-07-24T08:18:38+00:00

After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), it's not used anymore. Signed-off-by: Dong Aisheng Reviewed-by: Johan Derycke Signed-off-by: Ulf Hansson

mmc: sdhci-esdhc-imx: add delay line setting support

2013-10-21T19:58:13+00:00

The DLL(Delay Line) is newly added to assist in sampling read data. The DLL provides the ability to programmatically select a quantized delay (in fractions of the clock period) regardless of on-chip variations such as process, voltage and temperature (PVT). This patch adds a user interface to set slave delay line via device tree. It's usually used in high speed mode like mmc DDR mode when the signal quality is not good caused by board design, e.g. the signal path is too long. User can manually set delay line to find a suitable data sampling window for card to work properly. Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Chris Ball

mmc: sdhci-esdhc-imx: change pinctrl state according to uhs mode

2013-09-26T11:57:28+00:00

Without proper pinctrl state, the card may not be able to work on high speed stablely. e.g. SDR104. This patch add pinctrl state switch code according to different uhs mode include 100mhz sate, 200mhz sate and normal state (50Mhz and below). Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Chris Ball

mmc: esdhc-imx: parse max-frequency from devicetree

2013-06-27T15:29:41+00:00

In order to make it possible to reduce the SD bus frequency, parse the optional "max-frequency" attribute as documented in devicetree/bindings/mmc/mmc.txt Signed-off-by: Lucas Stach Acked-by: Shawn Guo Signed-off-by: Chris Ball

mmc: sdhci-esdhc-imx: support 8bit mode

2013-02-24T19:37:03+00:00

The i.MX esdhc has a nonstandard bit layout for the SDHCI_HOST_CONTROL register. To support 8bit bus width on i.MX populate the platform_bus_width callback. This is tested on an i.MX25, but should according to the datasheets work on the other i.MX using this hardware aswell. The i.MX6, while having a SDHCI_SPEC_300 controller, still uses the same nonstandard register layout. Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo Tested-by: Dirk Behme Signed-off-by: Chris Ball