talos-op-linux/include/linux/pinctrl/pinconf-generic.h, branch v5.3

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-07-13T22:02:27+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...

pinctrl: remove unneeded #ifdef around declarations

2019-06-25T08:49:18+00:00

What is the point in surrounding the whole of declarations with ifdef like this? #ifdef CONFIG_FOO int foo(void); #endif If CONFIG_FOO is not defined, all callers of foo() will fail with implicit declaration errors since the top Makefile adds -Werror-implicit-function-declaration to KBUILD_CFLAGS. This breaks the build earlier when you are doing something wrong. That's it. Anyway, it will fail to link since the definition of foo() is not compiled. In summary, these ifdef are unneeded. Signed-off-by: Masahiro Yamada Signed-off-by: Linus Walleij

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194

2019-05-30T18:29:22+00:00

Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman

pinctrl: generic: add new 'drive-strength-microamp' property support

2019-05-23T07:24:46+00:00

Add drive-strength-microamp property support to allow drive strength in uA Signed-off-by: Guillaume La Roque Signed-off-by: Linus Walleij

gpio: gpiolib: Generalise state persistence beyond sleep

2017-12-02T21:42:34+00:00

General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery Reviewed-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Linus Walleij

pinctrl: Add skew-delay pin config and bindings

2017-11-08T12:49:45+00:00

Some pin controllers (such as the Gemini) can control the expected clock skew and output delay on certain pins with a sub-nanosecond granularity. This is typically done by shunting in a number of double inverters in front of or behind the pin. Make it possible to configure this with a generic binding. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Acked-by: Hans Ulli Kroll Signed-off-by: Linus Walleij

pinctrl: Add sleep related state to indicate sleep related configs

2017-08-31T07:15:21+00:00

In some scenarios, we should set some pins as input/output/pullup/pulldown when the specified system goes into deep sleep mode, then when the system goes into deep sleep mode, these pins will be set automatically by hardware. That means some pins are not controlled by any specific driver in the OS, but need to be controlled when entering sleep mode. Thus we introduce one sleep state config into pinconf-generic for users to configure. Signed-off-by: Baolin Wang Signed-off-by: Linus Walleij

pinctrl: generic: update references to Documentation/pinctrl.txt

2017-08-07T13:26:34+00:00

Update deprecated references to Documentation/pinctrl.txt since it has been moved to Documentation/driver-api/pinctl.rst. Signed-off-by: Ludovic Desroches Fixes: 5a9b73832e9e ("pinctrl.txt: move it to the driver-api book") Signed-off-by: Linus Walleij

pinctrl: generic: Add output-enable property

2017-06-29T12:30:49+00:00

Add output-enable generic pin configuration property. This properties allows enabling/disabling pin's output capabilities without actually driving any value on the line. Acked-by: Rob Herring [Added inline elaborations on buffer enabling/disabling] Signed-off-by: Linus Walleij

Revert "pinctrl: generic: Add bi-directional and output-enable"

2017-05-22T08:39:10+00:00

This reverts commit 8c58f1a7a4b6d1d723bf25fef9d842d5a11200d0. It turns out that applying these generic properties was premature: the properties used in the driver using this are of unclear electrical nature and the subject need to be discussed. Signed-off-by: Linus Walleij