talos-op-linux/fs/cifs/Makefile, branch master

cifs: Add support for root file systems

2019-09-16T16:43:38+00:00

Introduce a new CONFIG_CIFS_ROOT option to handle root file systems over a SMB share. In order to mount the root file system during the init process, make cifs.ko perform non-blocking socket operations while mounting and accessing it. Cc: Steve French Reviewed-by: Aurelien Aptel Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French

cifs: simplify code by removing CONFIG_CIFS_ACL ifdef

2019-07-08T03:37:43+00:00

SMB3 ACL support is needed for many use cases now and should not be ifdeffed out, even for SMB1 (CIFS). Remove the CONFIG_CIFS_ACL ifdef so ACL support is always built into cifs.ko Signed-off-by: Steve French

cifs: Add DFS cache routines

2018-12-28T16:05:58+00:00

* Add new dfs_cache.[ch] files * Add new /proc/fs/cifs/dfscache file - dump current cache when read - clear current cache when writing "0" to it * Add delayed_work to periodically refresh cache entries The new interface will be used for caching DFS referrals, as well as supporting client target failover. The DFS cache is a hashtable that maps UNC paths to cache entries. A cache entry contains: - the UNC path it is mapped on - how much the the UNC path the entry consumes - flags - a Time-To-Live after which the entry expires - a list of possible targets (linked lists of UNC paths) - a "hint target" pointing the last known working target or the first target if none were tried. This hint lets cifs.ko remember and try working targets first. * Looking for an entry in the cache is done with dfs_cache_find() - if no valid entries are found, a DFS query is made, stored in the cache and returned - the full target list can be copied and returned to avoid race conditions and looped on with the help with the dfs_cache_tgt_iterator * Updating the target hint to the next target is done with dfs_cache_update_tgthint() These functions have a dfs_cache_noreq_XXX() version that doesn't fetches referrals if no entries are found. These versions don't require the tcp/ses/tcon/cifs_sb parameters as a result. Expired entries cannot be used and since they have a pretty short TTL [1] in order for them to be useful for failover the DFS cache adds a delayed work called periodically to keep them fresh. Since we might not have available connections to issue the referral request when refreshing we need to store volume_info structs with credentials and other needed info to be able to connect to the right server. 1: Windows defaults: 5mn for domain-based referrals, 30mn for regular links Signed-off-by: Paulo Alcantara Signed-off-by: Aurelien Aptel Signed-off-by: Steve French

smb3: Add ftrace tracepoints for improved SMB3 debugging

2018-05-27T22:56:35+00:00

Although dmesg logs and wireshark network traces can be helpful, being able to dynamically enable/disable tracepoints (in this case via the kernel ftrace mechanism) can also be helpful in more quickly debugging problems, and more selectively tracing the events related to the bug report. This patch adds 12 ftrace tracepoints to cifs.ko for SMB3 events in some obvious locations. Subsequent patches will add more as needed. Example use: trace-cmd record -e cifs trace-cmd show Various trace events can be filtered. See: trace-cmd list | grep cifs for the current list of cifs tracepoints. Sample output (from mount and writing to a file): root@smf:/sys/kernel/debug/tracing/events/cifs# trace-cmd show mount.cifs-6633 [006] .... 7246.936461: smb3_cmd_done: pid=6633 tid=0x0 sid=0x0 cmd=0 mid=0 mount.cifs-6633 [006] .... 7246.936701: smb3_cmd_err: pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=1 status=0xc0000016 rc=-5 mount.cifs-6633 [006] .... 7246.943055: smb3_cmd_done: pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=2 mount.cifs-6633 [006] .... 7246.943298: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=3 mid=3 mount.cifs-6633 [006] .... 7246.943446: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=4 mount.cifs-6633 [006] .... 7246.943659: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=3 mid=5 mount.cifs-6633 [006] .... 7246.943766: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=11 mid=6 mount.cifs-6633 [006] .... 7246.943937: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=7 mount.cifs-6633 [006] .... 7246.944020: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=8 mount.cifs-6633 [006] .... 7246.944091: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=9 mount.cifs-6633 [006] .... 7246.944163: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=10 mount.cifs-6633 [006] .... 7246.944218: smb3_cmd_err: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=11 status=0xc0000225 rc=-2 mount.cifs-6633 [006] .... 7246.944219: smb3_fsctl_err: xid=0 fid=0xffffffffffffffff tid=0xf9447636 sid=0x3d9cf8e5 class=0 type=393620 rc=-2 mount.cifs-6633 [007] .... 7246.944353: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=12 bash-2071 [000] .... 7256.903844: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=13 bash-2071 [000] .... 7256.904172: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=14 bash-2071 [000] .... 7256.904471: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=15 bash-2071 [000] .... 7256.904950: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=16 bash-2071 [000] .... 7256.905305: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=17 bash-2071 [000] .... 7256.905688: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=6 mid=18 bash-2071 [000] .... 7256.905809: smb3_write_done: xid=0 fid=0xd628f511 tid=0xe1b781a sid=0x3d9cf8e5 offset=0x0 len=0x1b Signed-off-by: Steve French Acked-by: Ronnie Sahlberg

CIFS: SMBD: Establish SMB Direct connection

2018-01-25T01:49:05+00:00

Add code to implement the core functions to establish a SMB Direct connection. 1. Establish an RDMA connection to SMB server. 2. Negotiate and setup SMB Direct protocol. 3. Implement idle connection timer and credit management. SMB Direct is enabled by setting CONFIG_CIFS_SMB_DIRECT. Add to Makefile to enable building SMB Direct. Signed-off-by: Long Li Signed-off-by: Steve French Reviewed-by: Pavel Shilovsky

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

[SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred

2017-07-08T23:57:07+00:00

Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they must always be on now. For various security reasons, SMB3 and later are STRONGLY preferred over CIFS and older dialects, and SMB3 (and later) will now be the default dialects so we do not want to allow them to be ifdeffed out. In the longer term, we may be able to make older CIFS support disableable in Kconfig with a new set of #ifdef, but we always want SMB3 and later support enabled. Signed-off-by: Steven French Reviewed-by: Pavel Shilovsky

cifs: Switch to generic xattr handlers

2016-04-23T19:33:03+00:00

Use xattr handlers for resolving attribute names. The amount of setup code required on cifs is nontrivial, so use the same get and set functions for all handlers, with switch statements for the different types of attributes in them. The set_EA handler can handle NULL values, so we don't need a separate removexattr function anymore. Remove the cifs_dbg statements related to xattr name resolution; they don't add much. Don't build xattr.o when CONFIG_CIFS_XATTR is not defined. Signed-off-by: Andreas Gruenbacher Signed-off-by: Al Viro

cifs: add new case-insensitive conversion routines that are based on wchar_t's

2013-09-08T19:38:05+00:00

The existing NLS case conversion routines do not appropriately handle the (now common) case where the local host is using UTF8. This is because nls_utf8 has no support at all for converting a utf8 string between cases and the NLS infrastructure in general cannot handle a multibyte input character. In any case, what we really need for cifs is to emulate how we expect the server to convert the character to upper or lowercase. Thus, even if we had routines that could handle utf8 case conversion, we likely would end up with the wrong result if the name ends up being in the upper planes. This patch adds a new scheme for doing unicode case conversion. The case conversion tables that Microsoft has published for Windows 8 have been converted to a set of lookup tables, and a routine is added to convert a wchar_t from lower to uppercase using those tables. Reported-and-Tested-by: Jan-Marek Glogowski Signed-off-by: Jeff Layton Signed-off-by: Steve French

CIFS: Add open/close file support for SMB2

2012-09-25T02:46:26+00:00

Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French