talos-op-linux/drivers/xen, branch master

Merge tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2020-02-05T17:44:14+00:00

Pull xen updates from Juergen Gross: - fix a bug introduced in 5.5 in the Xen gntdev driver - fix the Xen balloon driver when running on ancient Xen versions - allow Xen stubdoms to control interrupt enable flags of passed-through PCI cards - release resources in Xen backends under memory pressure * tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/blkback: Consistently insert one empty line between functions xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Squeeze page pools if a memory pressure is detected xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/gntdev: Do not use mm notifiers with autotranslating guests xen/balloon: Support xend-based toolstack take two xen-pciback: optionally allow interrupt enable flag writes

Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm

2020-01-30T16:04:01+00:00

Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...

xenbus/backend: Protect xenbus callback with lock

2020-01-29T13:35:49+00:00

A driver's 'reclaim_memory' callback can race with 'probe' or 'remove' because it will be called whenever memory pressure is detected. To avoid such race, this commit embeds a spinlock in each 'xenbus_device' and make 'xenbus' to hold the lock while the corresponded callbacks are running. Reviewed-by: Juergen Gross Signed-off-by: SeongJae Park Signed-off-by: Boris Ostrovsky

xenbus/backend: Add memory pressure handler callback

2020-01-29T13:35:49+00:00

Granting pages consumes backend system memory. In systems configured with insufficient spare memory for those pages, it can cause a memory pressure situation. However, finding the optimal amount of the spare memory is challenging for large systems having dynamic resource utilization patterns. Also, such a static configuration might lack flexibility. To mitigate such problems, this commit adds a memory reclaim callback to 'xenbus_driver'. If a memory pressure is detected, 'xenbus' requests every backend driver to volunarily release its memory. Note that it would be able to improve the callback facility for more sophisticated handlings of general pressures. For example, it would be possible to monitor the memory consumption of each device and issue the release requests to only devices which causing the pressure. Also, the callback could be extended to handle not only memory, but general resources. Nevertheless, this version of the implementation defers such sophisticated goals as a future work. Reviewed-by: Juergen Gross Reviewed-by: Roger Pau Monné Signed-off-by: SeongJae Park Signed-off-by: Boris Ostrovsky

xen/gntdev: Do not use mm notifiers with autotranslating guests

2020-01-28T18:22:48+00:00

Commit d3eeb1d77c5d ("xen/gntdev: use mmu_interval_notifier_insert") missed a test for use_ptemod when calling mmu_interval_read_begin(). Fix that. Fixes: d3eeb1d77c5d ("xen/gntdev: use mmu_interval_notifier_insert") CC: stable@vger.kernel.org # 5.5 Reported-by: Ilpo Järvinen Tested-by: Ilpo Järvinen Signed-off-by: Boris Ostrovsky Reviewed-by: Jason Gunthorpe Acked-by: Juergen Gross

xen/balloon: Support xend-based toolstack take two

2020-01-22T14:58:16+00:00

Commit 3aa6c19d2f38be ("xen/balloon: Support xend-based toolstack") tried to fix a regression with running on rather ancient Xen versions. Unfortunately the fix was based on the assumption that xend would just use another Xenstore node, but in reality only some downstream versions of xend are doing that. The upstream xend does not write that Xenstore node at all, so the problem must be fixed in another way. The easiest way to achieve that is to fall back to the behavior before commit 96edd61dcf4436 ("xen/balloon: don't online new memory initially") in case the static memory maximum can't be read. This is achieved by setting static_max to the current number of memory pages known by the system resulting in target_diff becoming zero. Fixes: 3aa6c19d2f38be ("xen/balloon: Support xend-based toolstack") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Cc: # 4.13 Signed-off-by: Boris Ostrovsky

Backmerge v5.5-rc7 into drm-next

2020-01-20T01:42:57+00:00

msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie

xen-pciback: optionally allow interrupt enable flag writes

2020-01-15T22:50:13+00:00

QEMU running in a stubdom needs to be able to set INTX_DISABLE, and the MSI(-X) enable flags in the PCI config space. This adds an attribute 'allow_interrupt_control' which when set for a PCI device allows writes to this flag(s). The toolstack will need to set this for stubdoms. When enabled, guest (stubdomain) will be allowed to set relevant enable flags, but only one at a time - i.e. it refuses to enable more than one of INTx, MSI, MSI-X at a time. This functionality is needed only for config space access done by device model (stubdomain) serving a HVM with the actual PCI device. It is not necessary and unsafe to enable direct access to those bits for PV domain with the device attached. For PV domains, there are separate protocol messages (XEN_PCI_OP_{enable,disable}_{msi,msix}) for this purpose. Those ops in addition to setting enable bits, also configure MSI(-X) in dom0 kernel - which is undesirable for PCI passthrough to HVM guests. This should not introduce any new security issues since a malicious guest (or stubdom) can already generate MSIs through other ways, see [1] page 8. Additionally, when qemu runs in dom0, it already have direct access to those bits. This is the second iteration of this feature. First was proposed as a direct Xen interface through a new hypercall, but ultimately it was rejected by the maintainer, because of mixing pciback and hypercalls for PCI config space access isn't a good design. Full discussion at [2]. [1]: https://invisiblethingslab.com/resources/2011/Software%20Attacks%20on%20Intel%20VT-d.pdf [2]: https://xen.markmail.org/thread/smpgpws4umdzizze [part of the commit message and sysfs handling] Signed-off-by: Simon Gaiser [the rest] Signed-off-by: Marek Marczykowski-Górecki Reviewed-by: Roger Pau Monné [boris: A few small changes suggested by Roger, some formatting changes] Signed-off-by: Boris Ostrovsky

Merge tag 'v5.5-rc3' into sched/core, to pick up fixes

2019-12-25T09:41:37+00:00

Signed-off-by: Ingo Molnar

Merge tag 'for-linus-5.5b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2019-12-21T14:24:56+00:00

Pull xen fixes from Juergen Gross: "This contains two cleanup patches and a small series for supporting reloading the Xen block backend driver" * tag 'for-linus-5.5b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/grant-table: remove multiple BUG_ON on gnttab_interface xen-blkback: support dynamic unbind/bind xen/interface: re-define FRONT/BACK_RING_ATTACH() xenbus: limit when state is forced to closed xenbus: move xenbus_dev_shutdown() into frontend code... xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk