talos-op-linux/drivers/usb/dwc2, branch master

usb: dwc2: Drop unlock/lock upon queueing a work item

2020-01-15T13:43:12+00:00

The original dwc_otg driver used a DWC_WORKQ_SCHEDULE() wrapper to queue work items. Because that wrapper acquired the driver's global spinlock, an unlock/lock dance was necessary whenever a work item was queued up while the global spinlock was already held. The dwc2 driver dropped DWC_WORKQ_SCHEDULE() in favor of a direct call to queue_work(), but retained the (now gratuitous) unlock/lock dance in dwc2_handle_conn_id_status_change_intr(). Drop it. Signed-off-by: Lukas Wunner Acked-by: Minas Harutyunyan Acked-by: Felipe Balbi Link: https://lore.kernel.org/r/77c07f00a6a9d94323c4a060a3c72817b0703b97.1574244795.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman

usb: dwc2: fix debugfs FIFO count

2020-01-15T09:39:21+00:00

The number of FIFOs may be lower than the number of endpoints. Use the correct total when printing FIFO details in debugfs. Acked-by: Minas Harutyunyan Signed-off-by: John Keeping Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Fix IN FIFO allocation

2020-01-15T09:39:21+00:00

On chips with fewer FIFOs than endpoints (for example RK3288 which has 9 endpoints, but only 6 which are cabable of input), the DPTXFSIZN registers above the FIFO count may return invalid values. With logging added on startup, I see: dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=1 sz=256 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=2 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=3 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=4 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=5 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=6 sz=32 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=7 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=8 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=9 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=10 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=11 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=12 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=13 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=14 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=15 sz=0 but: # cat /sys/kernel/debug/ff580000.usb/fifo Non-periodic FIFOs: RXFIFO: Size 275 NPTXFIFO: Size 16, Start 0x00000113 Periodic TXFIFOs: DPTXFIFO 1: Size 256, Start 0x00000123 DPTXFIFO 2: Size 128, Start 0x00000223 DPTXFIFO 3: Size 128, Start 0x000002a3 DPTXFIFO 4: Size 64, Start 0x00000323 DPTXFIFO 5: Size 64, Start 0x00000363 DPTXFIFO 6: Size 32, Start 0x000003a3 DPTXFIFO 7: Size 0, Start 0x000003e3 DPTXFIFO 8: Size 0, Start 0x000003a3 DPTXFIFO 9: Size 256, Start 0x00000123 so it seems that FIFO 9 is mirroring FIFO 1. Fix the allocation by using the FIFO count instead of the endpoint count when selecting a FIFO for an endpoint. Acked-by: Minas Harutyunyan Signed-off-by: John Keeping Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Fix NULL qh in dwc2_queue_transaction

2020-01-15T09:39:20+00:00

When a usb device disconnects in a certain way, dwc2_queue_transaction still gets called after dwc2_hcd_cleanup_channels. dwc2_hcd_cleanup_channels does "channel->qh = NULL;" but dwc2_queue_transaction still wants to dereference qh. This adds a check for a null qh. Acked-by: Minas Harutyunyan Signed-off-by: Alexandru M Stan [dianders: rebased to mainline] Signed-off-by: Douglas Anderson Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Fix Stalling a Non-Isochronous OUT EP

2020-01-15T09:39:20+00:00

Stalling a Non-Isochronous OUT Endpoint flow changed according programming guide. In dwc2_hsotg_ep_sethalt() function for OUT EP should not be set STALL bit. Instead should set SGOUTNAK in DCTL register. Set STALL bit should be set only after GOUTNAKEFF interrupt asserted. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-11-18T07:24:12+00:00

Felipe writes: USB: changes for v5.5 We have TI's glue layer for the Cadence USB3 controller going upstream. Tegra's XUDC driver is also going upstream with this pull request. Apart from these two big features, we have a bunch of patches switching over to devm_platform_ioremap_resource() in order to simplify code a little; and a non-critical fix for DWC3 usage via kexec. * tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits) usb: dwc3: of-simple: add a shutdown usb: cdns3: Add TI specific wrapper driver dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller usb: mtu3: fix race condition about delayed_status usb: gadget: Add UDC driver for tegra XUSB device mode controller usb: dwc3: debug: Remove newline printout usb: dwc2: use a longer core rest timeout in dwc2_core_reset() usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe() USB: gadget: udc: clean up an indentation issue usb: gadget: Quieten gadget config message phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq usb: gadget: Remove set but not used variable 'opts' in msg_do_config usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config usb: mtu3: add a new function to do status stage usb: gadget: configfs: fix concurrent issue between composite APIs usb: gadget: f_tcm: Provide support to get alternate setting in tcm function usb: gadget: Correct NULL pointer checking in fsl gadget usb: fsl: Remove unused variable USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein USB: dummy-hcd: increase max number of devices to 32 ...

usb: dwc2: create debugfs directory under usb root

2019-11-14T03:16:35+00:00

Now the USB gadget subsystem can use the USB debugfs root directory, so move dwc2's directory from the root of the debugfs filesystem into the root of usb Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1573541519-28488-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: Spelling s/enpoint/endpoint/

2019-11-04T14:53:00+00:00

Fix misspellings of "endpoint". Signed-off-by: Geert Uytterhoeven Acked-by: Li Yang Acked-by: Minas Harutyunyan Link: https://lore.kernel.org/r/20191024152833.30698-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

usb: dwc2: use a longer core rest timeout in dwc2_core_reset()

2019-10-22T07:42:08+00:00

Testing on different generations of Lantiq MIPS SoC based boards, showed that it takes up to 1500 us until the core reset bit is cleared. The driver from the vendor SDK (ifxhcd) uses a 1 second timeout. Use the same timeout to fix wrong hang detections and make the driver work for Lantiq MIPS SoCs. At least till kernel 4.14 the hanging reset only caused a warning but the driver was probed successful. With kernel 4.19 errors out with EBUSY. Cc: linux-stable # 4.19+ Signed-off-by: Mathias Kresin Signed-off-by: Felipe Balbi

Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-09-02T17:20:57+00:00

Felipe writes: USB: Changes for v5.4 merge window With only 45 non-merge commits, we have a small merge window from the Gadget perspective. The biggest change here is the addition of the Cadence USB3 DRD Driver. All other changes are small, non-critical fixes or smaller new features like the improvement to BESL handling in dwc3. Signed-off-by: Felipe Balbi * tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits) usb: gadget: net2280: Add workaround for AB chip Errata 11 usb: gadget: net2280: Move all "ll" registers in one structure usb: dwc3: gadget: Workaround Mirosoft's BESL check usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb: cdns3: Add Cadence USB3 DRD Driver usb: common: Simplify usb_decode_get_set_descriptor function. usb: common: Patch simplify usb_decode_set_clear_feature function. usb: common: Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: gadget: composite: Set recommended BESL values usb: dwc3: gadget: Set BESL config parameter usb: dwc3: Separate field holding multiple properties usb: gadget: Export recommended BESL values usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant usb: udc: lpc32xx: silence fall-through warning usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables usb: udc: lpc32xx: remove set but not used 3 variables usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails usb: dwc3: st: Add of_dev_put() in probe function usb: dwc3: st: Add of_node_put() before return in probe function ...