talos-op-linux/drivers/usb/core/usb-acpi.c, branch master

usb: assign ACPI companions for embedded USB devices

2019-01-25T07:46:26+00:00

USB devices permanently connected to USB ports may be described in ACPI tables and share ACPI devices with ports they are connected to. See [1] for details. This will allow us to describe sideband resources for devices, such as, for example, hard reset line for BT USB controllers. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/other-acpi-namespace-objects#acpi-namespace-hierarchy-and-adr-for-embedded-usb-devices Signed-off-by: Dmitry Torokhov Signed-off-by: Rajat Jain (changed how we get the usb_port) Acked-by: Greg Kroah-Hartman Tested-by: Sukumar Ghorai Signed-off-by: Marcel Holtmann

usb: split code locating ACPI companion into port and device

2019-01-25T07:46:26+00:00

In preparation for handling embedded USB devices let's split usb_acpi_find_companion() into usb_acpi_find_companion_for_device() and usb_acpi_find_companion_for_port(). Signed-off-by: Dmitry Torokhov Signed-off-by: Rajat Jain Acked-by: Greg Kroah-Hartman Tested-by: Sukumar Ghorai Signed-off-by: Marcel Holtmann

usb: clarify ACPI spec version and section number for _UPC & _PLD

2018-03-09T17:37:10+00:00

ACPI spec inserts sections for new features frequently and section numbers are changed. It is easy to refer to ACPI spec if ACPI version is available in comments. There are no functional changes. Signed-off-by: Alex Hung Signed-off-by: Greg Kroah-Hartman

USB: core: Remove redundant license text

2017-11-04T10:55:39+00:00

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Signed-off-by: Greg Kroah-Hartman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: optimize acpi companion search for usb port devices

2017-06-03T09:02:58+00:00

This optimization significantly reduces xhci driver load time. In ACPI tables the acpi companion port devices are children of the hub device. The port devices are identified by their port number returned by the ACPI _ADR method. _ADR 0 is reserved for the root hub device. The current implementation to find a acpi companion port device loops through all acpi port devices under that parent hub, evaluating their _ADR method each time a new port device is added. for a xHC controller with 25 ports under its roothub it will end up invoking ACPI bytecode 625 times before all ports are ready, making it really slow. The _ADR values are already read and cached earler. So instead of running the bytecode again we can check the cached _ADR value first, and then fall back to the old way. As one of the more significant changes, the xhci load time on Intel kabylake reduced by 70%, (28ms) from initcall xhci_pci_init+0x0/0x49 returned 0 after 39537 usecs to initcall xhci_pci_init+0x0/0x49 returned 0 after 11270 usecs Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: find internal hub tier mismatch via acpi

2014-05-27T23:38:52+00:00

ACPI identifies peer ports by setting their 'group_token' and 'group_position' _PLD data to the same value. If a platform has tier mismatch [1] , ACPI can override the default (USB3 defined) peer port association for internal hubs. External hubs follow the default peer association scheme. Location data is cached as an opaque cookie in usb_port_location data. Note that we only consider the group_token and group_position attributes from the _PLD data as ACPI specifies that group_token is a unique identifier. When we find port location data for a port then we assume that the firmware will also describe its peer port. This allows the implementation to only ever set the peer once. This leads to a question about what happens when a pm runtime event occurs while the peer associations are still resolving. Since we only ever set the peer information once, a USB3 port needs to be prevented from suspending while its ->peer pointer is NULL (implemented in a subsequent patch). There is always the possibility that firmware mis-identifies the ports, but there is not much the kernel can do in that case. [1]: xhci 1.1 appendix D figure 131 [2]: acpi 5 section 6.1.8 [alan]: don't do default peering when acpi data present Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

usb: cleanup setting udev->removable from port_dev->connect_type

2014-05-27T23:35:10+00:00

Once usb-acpi has set the port's connect type the usb_device's ->removable attribute can be set in the standard location set_usb_port_removable(). This also changes behavior in the case where the firmware says that the port connect type is unknown. In that case just use the default setting determined from the hub descriptor. Note, we no longer pass udev->portnum to acpi_find_child_device() in the root hub case since: 1/ the usb-core sets this to zero 2/ acpi always expects zero ...just pass zero. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

usb: rename usb_port device objects

2014-05-27T23:35:10+00:00

The current port name "portX" is ambiguous. Before adding more port messages rename ports to "-portX" This is an ABI change, but the suspicion is that it will go unnoticed as the port power control implementation has been broken since its introduction. If however, someone was relying on the old name we can add sysfs links from the old name to the new name. Additionally, it unifies/simplifies port dev_printk messages and modifies instances of: dev_XXX(hub->intfdev, ..."port %d"... dev_XXX(&hdev->dev, ..."port%d"... into: dev_XXX(&port_dev->dev, ... Now that the names are unique usb_port devices it would be nice if they could be included in /sys/bus/usb. However, it turns out that this breaks 'lsusb -t'. For now, create a dummy port driver so that print messages are prefixed "usb 1-1-port3" rather than the subsystem-ambiguous " 1-1-port3". Finally, it corrects an odd usage of sscanf("port%d") in usb-acpi.c. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2014-01-24T23:51:02+00:00

Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...