talos-op-linux/drivers/staging/mt7621-dts, branch master

staging: mt7621-dts: fix register range of memc node in mt7621.dtsi

2020-01-10T12:49:18+00:00

The memc node from mt7621.dtsi has incorrect register resource. Fix it according to the programming guide. Signed-off-by: Weijie Gao Signed-off-by: Chuanhong Guo Link: https://lore.kernel.org/r/20200109080120.362110-1-gch981213@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: mt7621-dts: add support for second network interface

2019-07-03T16:28:29+00:00

The mt7621 has two network interfaces, one that connects to an internal switch, and one that can connect to either that switch or an external phy, or possibly an internal phy. The Gnubee-PC2 has an external phy for use with the second interface. This patch add some support for the second interface to mt7621.dtsi and add a gbpc2.dts which makes use of this. This allows the second interface to be used. I don't fully understand how to configure this interface - the documentation is thin - so there could well be room for improvement here. Signed-off-by: NeilBrown Link: https://lore.kernel.org/r/156194178766.1430.12784163026696670896.stgit@noble.brown Signed-off-by: Greg Kroah-Hartman

staging: mt7621-dts: update sdhci config.

2019-07-03T16:28:29+00:00

The mtk-sd driver has been updated to support the IP in the mt7621, so update our configuration to work with it. Signed-off-by: NeilBrown Link: https://lore.kernel.org/r/156194178761.1430.1625105851941268306.stgit@noble.brown Signed-off-by: Greg Kroah-Hartman

staging: mt7621-dts: add gpio perst to pcie bindings node

2019-06-20T12:45:50+00:00

Driver has been changed to use perts gpio reset instead of perst builtin behaviour. Update device tree accordly. Signed-off-by: Sergio Paracuellos Signed-off-by: Greg Kroah-Hartman

staging: Add missing newline at end of file

2019-06-18T06:59:40+00:00

"git diff" says: \ No newline at end of file after modifying the files. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

staging: add missing SPDX lines to Makefile files

2019-04-03T09:10:15+00:00

There are a few remaining drivers/staging/*/Makefile files that do not have SPDX identifiers in them. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Reviewed-by: Mukesh Ojha Signed-off-by: Greg Kroah-Hartman

staging: add missing SPDX lines to Kconfig files

2019-04-03T09:10:15+00:00

There are a few remaining drivers/staging/*/Kconfig files that do not have SPDX identifiers in them. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman

staging: mt7621-dts: simplify pcie phy bindings

2019-03-29T16:22:54+00:00

If each phy port doesn't have its own resources, then we don't need child nodes. Handle it using #phy-cells to 1 for both phy's. Signed-off-by: Sergio Paracuellos Reviewed-by: NeilBrown Signed-off-by: Greg Kroah-Hartman

staging: mt7621-dts: update ethernet settings.

2019-03-18T06:05:24+00:00

The ethernet in mt7621 is now supported by drivers/net/ethernet/mediatek/ which provides support for the integrated switch through DSA. This requires some devicetree changes, and particularly allows a board dts to identify which switch ports are present. The second CPU interface - gmac1 - doesn't work yet, so the device tree information may not be correct. The phy (which is present on the gnubee-pc2) can negotiate and report connection speed etc, but no traffic flows. The gnubee-pc1 has two network ports which are 'black' and 'blue'. There are connected to switch ports 0 and 4 respectively. Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman

staging: mt7621-dts: add general pcie reset line to pcie bindings

2019-02-19T10:13:08+00:00

Add general pci reset line to pcie bindings to use reset_control properly in driver code. Signed-off-by: Sergio Paracuellos Reviewed-by: NeilBrown Signed-off-by: Greg Kroah-Hartman