talos-op-linux/drivers/scsi/hisi_sas, branch master

scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask

2020-01-21T00:31:14+00:00

In future we will want to use hisi_sas_cq.pci_irq_mask for non-pci interrupt masks, so rename to be more general. Link: https://lore.kernel.org/r/1579522957-4393-7-git-send-email-john.garry@huawei.com Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity

2020-01-21T00:31:14+00:00

Add prints to inform the user of enabled features. Link: https://lore.kernel.org/r/1579522957-4393-6-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: hisi_sas: Modify the file permissions of trigger_dump to write only

2020-01-21T00:31:14+00:00

The trigger_dump file is only used to manually trigger the dump, and did not provide a read callback function for it, so its file permission setting to 600 is wrong,and should be changed to 200. Link: https://lore.kernel.org/r/1579522957-4393-5-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: hisi_sas: Replace magic number when handle channel interrupt

2020-01-21T00:31:14+00:00

We use magic number as offset and mask when handle channel interrupt, so use macro to replace it. Link: https://lore.kernel.org/r/1579522957-4393-4-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock

2020-01-21T00:31:13+00:00

After changing tasklet to workqueue or threaded irq, some critical resources are only used on threads (not in interrupt or bottom half of interrupt), so replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock to protect those critical resources. Link: https://lore.kernel.org/r/1579522957-4393-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: hisi_sas: use threaded irq to process CQ interrupts

2020-01-21T00:31:13+00:00

Currently IRQ_EFFECTIVE_AFF_MASK is enabled for ARM_GIC and ARM_GIC3, so it only allows a single target CPU in the affinity mask to process interrupts and also interrupt thread, and the performance of using threaded irq is almost the same as tasklet. But if the config is not enabled, the interrupt thread will be allowed all the CPUs in the affinity mask. At that situation it improves the performance (about 20%). Note: IRQ_EFFECTIVE_AFF_MASK is configured differently for different architecture chip, and it seems to be better to make it be configured easily. Link: https://lore.kernel.org/r/1579522957-4393-2-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

compat_ioctl: scsi: handle HDIO commands from drivers

2020-01-03T08:42:52+00:00

The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands for SCSI devices, it is used by all libata drivers as well as a few drivers that support SAS attached SATA drives. The only command that is not safe for compat ioctls here is HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall() in order to do both cases correctly, and change all callers to use it as both native and compat callback pointers, including the indirect callers through sas_ioctl and ata_scsi_ioctl. Reviewed-by: Ben Hutchings Signed-off-by: Arnd Bergmann

scsi: hisi_sas: Stop converting a bool into a bool

2019-11-13T03:21:34+00:00

The !! operator on a bool is pointless, so remove an example in hisi_sas_rescan_topology(). Link: https://lore.kernel.org/r/1573551059-107873-5-git-send-email-john.garry@huawei.com Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: hisi_sas: Relocate call to hisi_sas_debugfs_exit()

2019-11-13T03:21:34+00:00

Currently we call function hisi_sas_debugfs_exit() to remove debugfs_dir before freeing interrupt irqs and destroying workqueue in the driver remove path. If a dump is triggered before function hisi_sas_debugfs_exit() but debugfs_work may be called after it, so it may refer to already removed debugfs_dir which will cause NULL pointer dereference. To avoid it, put function hisi_sas_debugfs_exit() after free_irqs and destroy workqueue when removing hisi_sas driver. Link: https://lore.kernel.org/r/1573551059-107873-4-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: hisi_sas: Return directly if init hardware failed

2019-11-13T03:21:34+00:00

Need to return directly if init hardware failed. Fixes: 73a4925d154c ("scsi: hisi_sas: Update all the registers after suspend and resume") Link: https://lore.kernel.org/r/1573551059-107873-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen