talos-op-linux/drivers/pci/pcie/Makefile, branch master

PCI/LINK: Add Kconfig option (default off)

2019-05-02T13:34:32+00:00

e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") added dmesg logging whenever a link changes speed or width to a state that is considered degraded. Unfortunately, it cannot differentiate signal integrity-related link changes from those intentionally initiated by an endpoint driver, including drivers that may live in userspace or VMs when making use of vfio-pci. Some GPU drivers actively manage the link state to save power, which generates a stream of messages like this: vfio-pci 0000:07:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 64.000 Gb/s with 5 GT/s x16 link) Since we can't distinguish the intentional changes from the signal integrity issues, leave the reporting turned off by default. Add a Kconfig option to turn it on if desired. Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.com Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas

PCI/LINK: Report degraded links via link bandwidth notification

2019-03-05T21:04:13+00:00

A warning is generated when a PCIe device is probed with a degraded link, but there was no similar mechanism to warn when the link becomes degraded after probing. The Link Bandwidth Notification provides this mechanism. Use the Link Bandwidth Management Interrupt to detect bandwidth changes, and rescan the bandwidth, looking for the weakest point. This is the same logic used in probe(). Signed-off-by: Alexandru Gagniuc Signed-off-by: Bjorn Helgaas Reviewed-by: Lukas Wunner

PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/

2018-06-11T13:11:39+00:00

Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/ so they're next to other PCIe service drivers. No functional change intended. Signed-off-by: Bjorn Helgaas Reviewed-by: Keith Busch

PCI/AER: Factor out error reporting to drivers/pci/pcie/err.c

2018-05-17T21:48:23+00:00

Move the error reporting callbacks from aerdrv_core.c to err.c, where they can be used by DPC in addition to AER. As part of aerdrv_core.c, these callbacks were built under CONFIG_PCIEAER. Moving them to the new err.c means they will now be built under CONFIG_PCIEPORTBUS, so adjust the definition of pci_uevent_ers() to match. Signed-off-by: Oza Pawandeep [bhelgaas: in reset_link(), initialize "driver" even if CONFIG_PCIEAER is unset, update pci_uevent_ers() #ifdef wrapper] Signed-off-by: Bjorn Helgaas

Merge branch 'pci/portdrv'

2018-04-04T18:27:58+00:00

- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) * pci/portdrv: PCI/DPC: Rename from pcie-dpc.c to dpc.c PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS PCI/AER: Use cached AER Capability offset PCI/portdrv: Rename and reverse sense of pcie_ports_auto PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter PCI/portdrv: Remove unnecessary include of PCI/portdrv: Simplify PCIe feature permission checking PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC PCI/portdrv: Remove pcie_port_bus_type link order dependency PCI/portdrv: Disable port driver in compat mode PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver PCI/PM: Move pcie_clear_root_pme_status() to core PCI/portdrv: Merge pcieport_if.h into portdrv.h PCI/portdrv: Move pcieport_if.h to drivers/pci/pcie/ Conflicts: drivers/pci/pcie/Makefile drivers/pci/pcie/portdrv.h

PCI/DPC: Rename from pcie-dpc.c to dpc.c

2018-03-31T22:48:57+00:00

Rename pcie-dpc.c to dpc.c. The path "drivers/pci/pcie/pcie-dpc.c" has more occurrences of "pci" than necessary. Signed-off-by: Bjorn Helgaas

PCI/portdrv: Simplify PCIe feature permission checking

2018-03-30T22:26:54+00:00

Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the platform firmware or the OS, so the host bridge driver may have to request permission from the platform before using them. On ACPI systems, this is done by negotiate_os_control() in acpi_pci_root_add(). The PCIe port driver later uses pcie_port_platform_notify() and pcie_port_acpi_setup() to figure out whether it can use these features. But all we need is a single bit for each service, so these interfaces are needlessly complicated. Simplify this by adding bits in the struct pci_host_bridge to show when the OS has permission to use each feature: + unsigned int native_aer:1; /* OS may use PCIe AER */ + unsigned int native_hotplug:1; /* OS may use PCIe hotplug */ + unsigned int native_pme:1; /* OS may use PCIe PME */ These are set when we create a host bridge, and the host bridge driver can clear the bits corresponding to any feature the platform doesn't want us to use. Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

PCI/portdrv: Remove pcie_port_bus_type link order dependency

2018-03-30T22:26:53+00:00

The pcie_port_bus_type must be registered before drivers that depend on it can be registered. Those drivers include: pcied_init() # PCIe native hotplug driver aer_service_init() # AER driver dpc_service_init() # DPC driver pcie_pme_service_init() # PME driver Previously we registered pcie_port_bus_type from pcie_portdrv_init(), a device_initcall. The callers of pcie_port_service_register() (above) are also device_initcalls. This is fragile because the device_initcall ordering depends on link order, which is not explicit. Register pcie_port_bus_type from pci_driver_init() along with pci_bus_type. This removes the link order dependency between portdrv and the pciehp, AER, DPC, and PCIe PME drivers. Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki Reviewed-by: Christoph Hellwig

PCI: Tidy Makefiles

2018-03-19T19:20:41+00:00

Indent things so they line up neatly and remove extra blank lines and superfluous comments. No functional change intended. Signed-off-by: Bjorn Helgaas

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman