<feed xmlns='http://www.w3.org/2005/Atom'>
<title>talos-op-linux/drivers/parport, branch master</title>
<subtitle>Talos™ II Linux sources for OpenPOWER</subtitle>
<id>https://git.raptorcs.com/git/talos-op-linux/atom?h=master</id>
<link rel='self' href='https://git.raptorcs.com/git/talos-op-linux/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/'/>
<updated>2019-11-13T11:09:49+00:00</updated>
<entry>
<title>parport: daisy: use new parport device model</title>
<updated>2019-11-13T11:09:49+00:00</updated>
<author>
<name>Sudip Mukherjee</name>
<email>sudipm.mukherjee@gmail.com</email>
</author>
<published>2019-10-16T14:45:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=60f8a59ddcdc7fb7c17180ba10d9c49bc91156c7'/>
<id>urn:sha1:60f8a59ddcdc7fb7c17180ba10d9c49bc91156c7</id>
<content type='text'>
Modify parport daisy driver to use the new parallel port device model.

Last attempt was '1aec4211204d ("parport: daisy: use new parport device
model")' which failed as daisy was also trying to load the low level
driver and that resulted in a deadlock.

Cc: Michal Kubecek &lt;mkubecek@suse.cz&gt;
Signed-off-by: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Tested-by: Steven Rostedt (VMware) &lt;rostedt@goodmis.org&gt;
Link: https://lore.kernel.org/r/20191016144540.18810-4-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>parport: load lowlevel driver if ports not found</title>
<updated>2019-11-13T11:09:48+00:00</updated>
<author>
<name>Sudip Mukherjee</name>
<email>sudipm.mukherjee@gmail.com</email>
</author>
<published>2019-10-16T14:45:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=231ec2f24dad18d021b361045bbd618ba62a274e'/>
<id>urn:sha1:231ec2f24dad18d021b361045bbd618ba62a274e</id>
<content type='text'>
Usually all the distro will load the parport low level driver as part
of their initialization. But we can get into a situation where all the
parallel port drivers are built as module and we unload all the modules
at a later time. Then if we just do "modprobe parport" it will only
load the parport module and will not load the low level driver which
will actually register the ports. So, check the bus if there is any
parport registered, if not, load the low level driver.

We can get into the above situation with all distro but only Suse has
setup the alias for "parport_lowlevel" and so it only works in Suse.
Users of Debian based distro will need to load the lowlevel module
manually.

Signed-off-by: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>parport: do not check portlist when using device-model</title>
<updated>2019-11-13T11:09:48+00:00</updated>
<author>
<name>Sudip Mukherjee</name>
<email>sudipm.mukherjee@gmail.com</email>
</author>
<published>2019-10-16T14:45:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=e962cd9cf9cfb1f5db6bbad6a6470e5ccf56e290'/>
<id>urn:sha1:e962cd9cf9cfb1f5db6bbad6a6470e5ccf56e290</id>
<content type='text'>
We do not need to maintain a list of ports when we are using the
device-model. The base layer is going to maintain the list for us and
we can get the list of ports just using bus_for_each_dev().

Signed-off-by: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Link: https://lore.kernel.org/r/20191016144540.18810-2-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>parport: daisy: avoid hardcoded name</title>
<updated>2019-11-13T11:09:47+00:00</updated>
<author>
<name>Sudip Mukherjee</name>
<email>sudipm.mukherjee@gmail.com</email>
</author>
<published>2019-10-16T14:45:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=c059d579961d62c1a675cb89ef799902e6bce815'/>
<id>urn:sha1:c059d579961d62c1a675cb89ef799902e6bce815</id>
<content type='text'>
The daisy device name is hardcoded, define it in the header file and
use it in the code.

Signed-off-by: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Link: https://lore.kernel.org/r/20191016144540.18810-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc</title>
<updated>2019-09-18T18:14:31+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-09-18T18:14:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=6cfae0c26b21dce323fe8799b66cf4bc996e3565'/>
<id>urn:sha1:6cfae0c26b21dce323fe8799b66cf4bc996e3565</id>
<content type='text'>
Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...
</content>
</entry>
<entry>
<title>parport: parport_serial: Add support for Sunix Multi I/O boards</title>
<updated>2019-09-04T10:43:54+00:00</updated>
<author>
<name>Kai-Heng Feng</name>
<email>kai.heng.feng@canonical.com</email>
</author>
<published>2019-08-09T19:01:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=c6c94eecb19bdc881518c5762474da6ec9f68c81'/>
<id>urn:sha1:c6c94eecb19bdc881518c5762474da6ec9f68c81</id>
<content type='text'>
Sunix Multi I/O boards are different to Timedia's.

This patch adds proper support for Sunix MIO boards with 1 parallel and
up to 4 serial ports.

Cc: Morris Ku &lt;morris_ku@sunix.com&gt;
Cc: Debbie Liu &lt;debbie_liu@sunix.com&gt;
Signed-off-by: Kai-Heng Feng &lt;kai.heng.feng@canonical.com&gt;
Link: https://lore.kernel.org/r/20190809190130.30773-2-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>parport: parport_serial: Use dev_get_drvdata</title>
<updated>2019-08-05T15:56:46+00:00</updated>
<author>
<name>Chuhong Yuan</name>
<email>hslester96@gmail.com</email>
</author>
<published>2019-08-01T19:14:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=9e18a80c2e06c154c9c745091f7caec487423519'/>
<id>urn:sha1:9e18a80c2e06c154c9c745091f7caec487423519</id>
<content type='text'>
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan &lt;hslester96@gmail.com&gt;
Signed-off-by: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Link: https://lore.kernel.org/r/20190801191408.10977-3-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>parport: Add missing newline at end of file</title>
<updated>2019-08-05T15:56:45+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert+renesas@glider.be</email>
</author>
<published>2019-08-01T19:14:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=5b25380d906af3be2489066295ea8c832efc71e8'/>
<id>urn:sha1:5b25380d906af3be2489066295ea8c832efc71e8</id>
<content type='text'>
"git diff" says:

    \ No newline at end of file

after modifying the file.

Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Signed-off-by: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Link: https://lore.kernel.org/r/20190801191408.10977-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'docs-5.3' of git://git.lwn.net/linux</title>
<updated>2019-07-09T19:34:26+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-07-09T19:34:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=e9a83bd2322035ed9d7dcf35753d3f984d76c6a5'/>
<id>urn:sha1:e9a83bd2322035ed9d7dcf35753d3f984d76c6a5</id>
<content type='text'>
Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...
</content>
</entry>
<entry>
<title>treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500</title>
<updated>2019-06-19T15:09:55+00:00</updated>
<author>
<name>Thomas Gleixner</name>
<email>tglx@linutronix.de</email>
</author>
<published>2019-06-04T08:11:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.raptorcs.com/git/talos-op-linux/commit/?id=d2912cb15bdda8ba4a5dd73396ad62641af2f520'/>
<id>urn:sha1:d2912cb15bdda8ba4a5dd73396ad62641af2f520</id>
<content type='text'>
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Enrico Weigelt &lt;info@metux.net&gt;
Reviewed-by: Kate Stewart &lt;kstewart@linuxfoundation.org&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
</feed>
