talos-op-linux/drivers/net/wireless/rtlwifi/rtl8188ee, branch master

rtlwifi: rtl818x: Move drivers into new realtek directory

2015-10-14T10:33:10+00:00

Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl888ee: Fix firmware header endian issues

2015-08-13T12:31:24+00:00

This driver is converted to use the common firmware header struct. Because the old header definition failed to indicate that the multi-byte entries should be little endian, several problems were thus exposed. These are fixed. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: fix tm_trigger usage

2015-06-15T09:30:20+00:00

While working on getting my rtl8821au driver in pretty shape for inclusion, it is dicosvered that the tm_trigger flag is used only for the first device using this driver. This flag handles the thermal power management in the hardware. To change this add a entry in sttruct rtl_dm, so each device can handle is separately. Signed-off-by: Hans Ulli Kroll Signed-off-by: Kalle Valo

rtlwifi: Remove the clear interrupt routine from all drivers

2015-05-26T10:58:47+00:00

Several of these drivers have there TX randomly blocked for 3~5 seconds while measuring tx throughput (iperf). The root couse happens in rtl_pci_flush(). The function uses a while-loop to wait for TX queue length to decrease to 0. The TX queue length counts the number of packets that are queued in the driver. The driver relys on the TX OK interrupt to return skb and reduce TX queue length. The interrupt subroutine disables interupts, reads the interrupt registers, and then clears the registers in the beginning of _rtl_pci_interrupt(). After all interupts process are finished, the driver invokes enable_interrupt() to enable interupts. This behavior is normal for an interrupt subroutine. But enable_interrupt() invokes clear_interrupt() again. This unexpected interrupt clearing may cleari me fresh TX OK interrupts. These missing interrupts cause TX queue length to never reduce to 0i, which causes rtl_pci_flush() to be stuck in unterminated while-loop. This patch removes clear_interrupt() in enable_interrupt() to avoid this behavior. Signed-off-by: Vincent Fann Signed-off-by: Shao Fu Signed-off-by: Larry Finger Cc: Stable [3.18+] Signed-off-by: Kalle Valo

rtlwifi: rtl8188ee: Apply the new regulatory information

2015-05-26T10:56:33+00:00

The driver was setting a channel plan for the world. Now it reads it from EEPROM. Signed-off-by: Shao Fu Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8188ee: Fix pwrseqcmd.h include path.

2015-05-26T10:41:18+00:00

Signed-off-by: Lauri Kenttä Signed-off-by: Kalle Valo

rtlwifi: Change REG_CR+2 to MSR

2015-03-30T08:30:07+00:00

I changed REG_CR+2 and (MSR) to MSR because MSR is defined as (REG_CR + 2). Signed-off-by: Taehee Yoo Acked-by: Larry Finger Signed-off-by: Kalle Valo

rtl8188ee: fix build break due to missing rtl_hal_pwrseqcmdparsing definition

2015-03-20T06:29:45+00:00

I've been getting this error when building mainline kernels using Fedora's config files: drivers/net/wireless/rtlwifi/rtl8188ee/hw.c: In function ‘_rtl88ee_init_mac’: drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:853:2: error: implicit declaration of function ‘rtl_hal_pwrseqcmdparsing’ [-Werror=implicit-function-declaration] if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, ^ cc1: some warnings being treated as errors scripts/Makefile.build:258: recipe for target 'drivers/net/wireless/rtlwifi/rtl8188ee/hw.o' failed I'm not sure if this is the correct fix, but it does seem to allow the build to complete. I suspect that this was broken by commit 34ed780a6afc (rtlwifi: Fix problems with building an allyesconfig). Most of the files that removed the include of pwrseqcmd.h, added one for ../pwrseqcmd.h. The rtl8188ee driver had it removed it but didn't add the include of the file in the parent directory. Signed-off-by: Jeff Layton Acked-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8188ee: missing curly braces in handle_branch1()

2015-03-03T13:40:47+00:00

From the indenting, it seems like the READ_NEXT_PAIR() was supposed to be inside the while loop. Signed-off-by: Dan Carpenter Acked-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: Remove unused RF6052_MAX_REG define

2015-03-03T13:30:03+00:00

Signed-off-by: Priit Laes Signed-off-by: Kalle Valo