talos-op-linux/drivers/net/wireless/realtek/rtlwifi/rtl8192c, branch master

rtlwifi: rtl8192ce: rtl8192c_com: Remove usage of private bit manipulation macros

2019-12-18T18:22:28+00:00

Besides the previously changes macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8192c: Drop condition with no effect

2019-10-31T08:05:39+00:00

As the "else if" and "else" branch body are identical the condition has no effect. So drop the "else if" condition. Signed-off-by: Saurav Girepunje Signed-off-by: Kalle Valo

rtlwifi: rtl8192c: Remove set but not used variables 'reg_ecc','reg_eac'

2019-10-09T08:22:40+00:00

Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c: In function rtl92c_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1373:6: warning: variable reg_ecc set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c: In function rtl92c_phy_iq_calibrate: drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1372:34: warning: variable reg_eac set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot Signed-off-by: zhengbin Signed-off-by: Kalle Valo

rtlwifi: fix potential NULL pointer dereference

2019-04-04T10:25:27+00:00

In case dev_alloc_skb fails, the fix safely returns to avoid potential NULL pointer dereference. Signed-off-by: Ping-Ke Shih Signed-off-by: Kalle Valo

rtlwifi: rtl8192com: Fix blank line problems

2019-02-28T08:30:05+00:00

The following types of blank line problems are reported: WARNING: Missing a blank line after declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8192{c,u}: Remove CamelCase variables

2019-02-19T15:02:56+00:00

This patch affects modules rtl8192ce, rtl8192cu, and rtl8192com. The following checkpatch exceptions are also fixed: CHECK: No space is necessary after a cast #237: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:90: + (u8 *) (&rfstate)); CHECK: No space is necessary after a cast #744: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c:329: + pwr_val[i] = (u8) ((writeval & (0x7f << CHECK: No space is necessary after a cast #784: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c:365: + (u8) writeval); CHECK: spaces preferred around that '/' (ctx:VxV) #963: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:513: + txqpageunit = txqpagenum/outepnum; ^ CHECK: Unnecessary parentheses around 'outepnum > 1' #975: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:521: + if ((outepnum > 1) && (txqremaininpage)) CHECK: Alignment should match open parenthesis #1059: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:617: +static void _rtl92cu_init_chipn_two_out_ep_priority(struct ieee80211_hw *hw, bool wmm_enable, ERROR: "foo * bar" should be "foo *bar" #1940: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:591: +void rtl92cu_fill_fake_txdesc(struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8192com: Replace old-style license information

2019-02-19T14:59:55+00:00

The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

headers: untangle kmemleak.h from mm.h

2018-04-06T04:36:27+00:00

Currently #includes for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add to any users of kmemleak_* that don't already #include it. Also remove from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap Reviewed-by: Ingo Molnar Reported-by: Michael Ellerman [2 build failures] Reported-by: Fengguang Wu [2 build failures] Reviewed-by: Andrew Morton Cc: Wei Yongjun Cc: Luis R. Rodriguez Cc: Greg Kroah-Hartman Cc: Mimi Zohar Cc: John Johansen Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: replace more place to skb_put_[data:zero]

2017-06-20T17:30:14+00:00

spatch file, @@ expression skb, len, data; type t; @@ -memcpy((t *)skb_put(skb, len), data, len); +skb_put_data(skb, data, len); @@ identifier p; expression skb, len, data; type t; @@ -p = (t *)memset(skb_put(skb, len), data, len); +p = skb_put_zero(skb, len); @@ expression skb, len, data; type t; @@ -memcpy((t *)__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ identifier p; expression skb, len, data; type t; @@ -p = (t *)memset(__skb_put(skb, len), data, len); +p = __skb_put_zero(skb, len); Signed-off-by: yuan linyu Signed-off-by: David S. Miller