talos-op-linux/drivers/net/phy/Makefile, branch master

net: Add a layer for non-PHY MII time stamping drivers.

2019-12-26T03:51:33+00:00

While PHY time stamping drivers can simply attach their interface directly to the PHY instance, stand alone drivers require support in order to manage their services. Non-PHY MII time stamping drivers have a control interface over another bus like I2C, SPI, UART, or via a memory mapped peripheral. The controller device will be associated with one or more time stamping channels, each of which sits snoops in on a MII bus. This patch provides a glue layer that will enable time stamping channels to find their controlling device. Signed-off-by: Richard Cochran Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add Broadcom BCM84881 PHY driver

2019-12-11T19:53:42+00:00

Add a rudimentary Clause 45 driver for the BCM84881 PHY, found on Methode DM7052 SFPs. Reviewed-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller

net: phy: dp83869: Add TI dp83869 phy

2019-11-15T01:42:43+00:00

Add support for the TI DP83869 Gigabit ethernet phy device. The DP83869 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy Signed-off-by: David S. Miller

net: phy: adin: add support for Analog Devices PHYs

2019-08-16T18:56:25+00:00

This change adds support for Analog Devices Industrial Ethernet PHYs. Particularly the PHYs this driver adds support for: * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit Ethernet PHY The 2 chips are register compatible with one another. The main difference being that ADIN1200 doesn't operate in gigabit mode. The chips can be operated by the Generic PHY driver as well via the standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the kernel as well. This assumes that configuration of the PHY has been done completely in HW, according to spec. Configuration can also be done via registers, which will be supported by this driver. Datasheets: https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: Alexandru Ardelean Signed-off-by: David S. Miller

net: phy: Add mdio-aspeed

2019-08-03T00:56:28+00:00

The AST2600 design separates the MDIO controllers from the MAC, which is where they were placed in the AST2400 and AST2500. Further, the register interface is reworked again, so now we have three possible different interface implementations, however this driver only supports the interface provided by the AST2600. The AST2400 and AST2500 will continue to be supported by the MDIO support embedded in the FTGMAC100 driver. The hardware supports both C22 and C45 mode, but for the moment only C22 support is implemented. Signed-off-by: Andrew Jeffery Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-18T03:20:36+00:00

Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller

net: phy: rename Asix Electronics PHY driver

2019-06-09T20:24:17+00:00

[Resent to net instead of net-next - may clash with Anders Roxell's patch series addressing duplicate module names] Commit 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") introduced a new PHY driver drivers/net/phy/asix.c that causes a module name conflict with a pre-existiting driver (drivers/net/usb/asix.c). The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded by that driver via its PHY ID. A rename of the driver looks unproblematic. Rename PHY driver to ax88796b.c in order to resolve name conflict. Signed-off-by: Michael Schmitz Tested-by: Michael Schmitz Fixes: 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: tja11xx: Add TJA11xx PHY driver

2019-05-26T20:39:11+00:00

Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special BroadRReach 100BaseT1 PHYs used in automotive. Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: Florian Fainelli Cc: Guenter Roeck Cc: Heiner Kallweit Cc: Jean Delvare Cc: linux-hwmon@vger.kernel.org Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add amlogic g12a mdio mux support

2019-04-07T01:16:58+00:00

Add support for the mdio mux and internal phy glue of the g12a SoC family Reviewed-by: Neil Armstrong # clk parts Signed-off-by: Jerome Brunet Signed-off-by: David S. Miller

drivers: net: phy: mdio-mux: Add support for Generic Mux controls

2019-02-27T20:52:20+00:00

Add support for Generic Mux controls, when Mdio mux node is a consumer of mux produced by some other device. Signed-off-by: Pankaj Bansal Signed-off-by: David S. Miller