talos-op-linux/drivers/net/ethernet/xilinx/Kconfig, branch master

net: axienet: In kconfig remove arch dependency for axi_emac

2019-11-13T19:43:58+00:00

To enable xilinx axi_emac driver support on zynqmp ultrascale platform (ARCH64) there are two choices, mention ARCH64 as a dependency list and other is to check if this ARCH dependency list is really needed. Later approach seems more reasonable, so remove the obsolete ARCH dependency list for the axi_emac driver. Sanity test done for microblaze, zynq and zynqmp ultrascale platform. Signed-off-by: Radhey Shyam Pandey Signed-off-by: David S. Miller

net: axienet: convert to phylink API

2019-06-06T23:24:30+00:00

Convert this driver to use the phylink API rather than the legacy PHY API. This allows for better support for SFP modules connected using a 1000BaseX or SGMII interface. Signed-off-by: Robert Hancock Signed-off-by: David S. Miller

net: axienet: add X86 and ARM as supported platforms

2019-06-06T23:24:29+00:00

This driver should now build on (at least) X86 and ARM platforms, so add them as supported platforms for the driver in Kconfig. Signed-off-by: Robert Hancock Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: ll_temac: Allow use on x86 platforms

2019-05-01T18:33:30+00:00

With little-endian and 64-bit support in place, the ll_temac driver can now be used on x86 and x86_64 platforms. And while at it, enable COMPILE_TEST also. Signed-off-by: Esben Haabendal Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: ll_temac: Fix support for 64-bit platforms

2019-05-01T18:33:30+00:00

The use of buffer descriptor APP4 field (32-bit) for storing skb pointer obviously does not work on 64-bit platforms. As APP3 is also unused, we can use that to store the other half of 64-bit pointer values. Contrary to what is hinted at in commit message of commit 15bfe05c8d63 ("net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit") there are no other pointers stored in cdmac_bd. Signed-off-by: Esben Haabendal Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit

2017-11-29T14:43:24+00:00

On 64-bit (e.g. powerpc64/allmodconfig): drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); ^ cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer. Note that several other fields in struct cdmac_bd are also too small to hold physical addresses on 64-bit platforms. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller

net: ethernet: xilinx: Enable emaclite for MIPS

2016-09-08T23:06:37+00:00

The MIPS based xilfpga platform uses this driver. Enable it for MIPS Signed-off-by: Zubair Lutfullah Kakakhel Signed-off-by: David S. Miller

drivers/net: remove all references to obsolete Ethernet-HOWTO

2015-06-23T13:50:35+00:00

This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

net: emaclite: Enable emaclite for Xilinx Arm Zynq platform

2013-05-31T00:08:43+00:00

Enable emaclite for Xilinx ARM Zynq platform. Signed-off-by: Michal Simek Signed-off-by: David S. Miller