talos-op-linux/drivers/net/dsa/b53, branch master

net: dsa: b53: Always use dev->vlan_enabled in b53_configure_vlan()

2020-02-07T10:25:09+00:00

b53_configure_vlan() is called by the bcm_sf2 driver upon setup and indirectly through resume as well. During the initial setup, we are guaranteed that dev->vlan_enabled is false, so there is no change in behavior, however during suspend, we may have enabled VLANs before, so we do want to restore that setting. Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Enable Broadcom tags for 531x5/539x families

2020-01-09T00:01:13+00:00

The BCM531x5 and BCM539x families require that the IMP port be enabled within the management page and that management mode (SM_SW_FWD_MODE) be turned on. Once this is done, everything works as expected, including multicast with standalone DSA devices or bridge devices. Because such switches are frequencly cascaded with other internal Broadcom switches on which we want to enable Broadcom tags, update b53_can_enable_brcm_tags() to check the kind of DSA master tagging protocol being used, if it is one of the two supported Broadcom tagging protocols, force DSA_TAG_PROTO_NONE. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: Get information about stacked DSA protocol

2020-01-09T00:01:13+00:00

It is possible to stack multiple DSA switches in a way that they are not part of the tree (disjoint) but the DSA master of a switch is a DSA slave of another. When that happens switch drivers may have to know this is the case so as to determine whether their tagging protocol has a remove chance of working. This is useful for specific switch drivers such as b53 where devices have been known to be stacked in the wild without the Broadcom tag protocol supporting that feature. This allows b53 to continue supporting those devices by forcing the disabling of Broadcom tags on the outermost switches if necessary. The get_tag_protocol() function is therefore updated to gain an additional enum dsa_tag_protocol argument which denotes the current tagging protocol used by the DSA master we are attached to, else DSA_TAG_PROTO_NONE for the top of the dsa_switch_tree. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Fix egress flooding settings

2019-12-17T00:08:09+00:00

There were several issues with 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") that resulted in breaking connectivity for standalone ports: - both user and CPU ports must allow unicast and multicast forwarding by default otherwise this just flat out breaks connectivity for standalone DSA ports - IP multicast is treated similarly as multicast, but has separate control registers - the UC, MC and IPMC lookup failure register offsets were wrong, and instead used bit values that are meaningful for the B53_IP_MULTICAST_CTRL register Fixes: 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: b53: Add support for MDB

2019-10-28T20:58:20+00:00

In preparation for supporting IGMP snooping with or without the use of a bridge, add support within b53_common.c to program the ARL entries for multicast operations. The key difference is that a multicast ARL entry is comprised of a bitmask of enabled ports, instead of a port number. Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: remove dsa_switch_alloc helper

2019-10-22T19:37:07+00:00

Now that ports are dynamically listed in the fabric, there is no need to provide a special helper to allocate the dsa_switch structure. This will give more flexibility to drivers to embed this structure as they wish in their private structure. Signed-off-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: dsa: use dsa_to_port helper everywhere

2019-10-22T19:37:06+00:00

Do not let the drivers access the ds->ports static array directly while there is a dsa_to_port helper for this purpose. At the same time, un-const this helper since the SJA1105 driver assigns the priv member of the returned dsa_port structure. Signed-off-by: Vivien Didelot Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski

net: dsa: b53: Do not clear existing mirrored port mask

2019-10-06T13:55:14+00:00

Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by: Hubert Feurstein Fixes: ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: b53: Use the correct style for SPDX License Identifier

2019-09-22T22:24:51+00:00

This patch corrects the SPDX License Identifier style in header file for Broadcom BCM53xx managed switch driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Reviewed-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: dsa: b53: Add support for port_egress_floods callback

2019-09-16T07:06:12+00:00

Add support for configuring the per-port egress flooding control for both Unicast and Multicast traffic. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller