talos-op-linux/drivers/misc/Kconfig, branch v4.12.5

misc: pci_endpoint_test: select CRC32

2017-05-16T21:05:40+00:00

There is the following link error with CONFIG_PCI_ENDPOINT_TEST=y and CONFIG_CRC32=m: drivers/built-in.o: In function 'pci_endpoint_test_ioctl': pci_endpoint_test.c:(.text+0xf1251): undefined reference to 'crc32_le' pci_endpoint_test.c:(.text+0xf1322): undefined reference to 'crc32_le' pci_endpoint_test.c:(.text+0xf13b2): undefined reference to 'crc32_le' pci_endpoint_test.c:(.text+0xf141e): undefined reference to 'crc32_le' Fix this by selecting CRC32 in the PCI_ENDPOINT_TEST kconfig entry. Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") Signed-off-by: Tobias Regnery Signed-off-by: Greg Kroah-Hartman

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-05-09T02:03:25+00:00

Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...

misc: Add host side PCI driver for PCI test function device

2017-04-28T15:23:19+00:00

Add PCI endpoint test driver that can verify base address register, legacy interrupt/MSI interrupt and read/write/copy buffers between host and device. The corresponding pci-epf-test function driver should be used on the EP side. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Bjorn Helgaas

auxdisplay: Move arm-charlcd.c to drivers/auxdisplay folder

2017-04-08T15:48:20+00:00

It looks like arm-charlcd.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Reviewed-by: Linus Walleij Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

auxdisplay: Move panel.c to drivers/auxdisplay folder

2017-04-08T15:48:20+00:00

It looks like panel.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Acked-by: Geert Uytterhoeven Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

auxdisplay: charlcd: Extract character LCD core from misc/panel

2017-03-17T06:10:49+00:00

Extract the character LCD core from the Parallel port LCD/Keypad Panel driver in the misc subsystem, and convert it into a subdriver in the auxdisplay subsystem. This allows the character LCD core to be used by other drivers later. Compilation is controlled by its own Kconfig symbol CHARLCD, which is to be selected by its users, but can be enabled manually for compile-testing. All functions changed their prefix from "lcd_" to "charlcd_", and gained a "struct charlcd *" parameter to operate on a specific instance. While the driver API thus is ready to support multiple instances, the current limitation of a single display (/dev/lcd has a single misc minor assigned) is retained. No functional changes intended. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

drivers/misc: Add Aspeed LPC control driver

2017-03-17T06:10:49+00:00

In order to manage server systems, there is typically another processor known as a BMC (Baseboard Management Controller) which is responsible for powering the server and other various elements, sometimes fans, often the system flash. The Aspeed BMC family which is what is used on OpenPOWER machines and a number of x86 as well is typically connected to the host via an LPC (Low Pin Count) bus (among others). The LPC bus is an ISA bus on steroids. It's generally used by the BMC chip to provide the host with access to the system flash (via MEM/FW cycles) that contains the BIOS or other host firmware along with a number of SuperIO-style IOs (via IO space) such as UARTs, IPMI controllers. On the BMC chip side, this is all configured via a bunch of registers whose content is related to a given policy of what devices are exposed at a per system level, which is system/vendor specific, so we don't want to bolt that into the BMC kernel. This started with a need to provide something nicer than /dev/mem for user space to configure these things. One important aspect of the configuration is how the MEM/FW space is exposed to the host (ie, the x86 or POWER). Some registers in that bridge can define a window remapping all or portion of the LPC MEM/FW space to a portion of the BMC internal bus, with no specific limits imposed in HW. I think it makes sense to ensure that this window is configured by a kernel driver that can apply some serious sanity checks on what it is configured to map. In practice, user space wants to control this by flipping the mapping between essentially two types of portions of the BMC address space: - The flash space. This is a region of the BMC MMIO space that more/less directly maps the system flash (at least for reads, writes are somewhat more complicated). - One (or more) reserved area(s) of the BMC physical memory. The latter is needed for a number of things, such as avoiding letting the host manipulate the innards of the BMC flash controller via some evil backdoor, we want to do flash updates by routing the window to a portion of memory (under control of a mailbox protocol via some separate set of registers) which the host can use to write new data in bulk and then request the BMC to flash it. There are other uses, such as allowing the host to boot from an in-memory flash image rather than the one in flash (very handy for continuous integration and test, the BMC can just download new images). It is important to note that due to the way the Aspeed chip lets the kernel configure the mapping between host LPC addresses and BMC ram addresses the offset within the window must be a multiple of size. Not doing so will fragment the accessible space rather than simply moving 'zero' upwards. This is caused by the nature of HICR8 being a mask and the way host LPC addresses are translated. Signed-off-by: Cyril Bur Reviewed-by: Joel Stanley Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

misc: panel: Move all suboptions into a big if section

2017-02-10T14:32:53+00:00

All 18 suboptions related to the panel driver have individual dependencies on PANEL. Replace them by a single "if PANEL / endif # PANEL" section for easier dependency management. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

misc: panel: Remove reference to misc device support

2017-02-10T14:32:53+00:00

As of commit 7c5763b8453a9487 ("drivers: misc: Remove MISC_DEVICES config option"), misc device support no longer needs to be enabled manually. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

misc: fix typo on Kconfig

2017-02-03T10:49:06+00:00

When panel driver was moved from staging to misc a new line was missing to be added on Kconfig file. Fixes: 305b37bd01c2 ("misc: Move panel driver out of staging") Signed-off-by: Miguel Bernal Marin Signed-off-by: Greg Kroah-Hartman