talos-op-linux/drivers/md/dm-target.c, branch v4.8

Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2016-07-29T00:38:16+00:00

Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...

dm error: add DAX support

2016-07-21T03:49:50+00:00

Allow the error target to replace an existing DAX-enabled target. Signed-off-by: Mike Snitzer

dm: move request-based code out to dm-rq.[hc]

2016-06-10T19:15:44+00:00

Add some seperation between bio-based and request-based DM core code. 'struct mapped_device' and other DM core only structures and functions have been moved to dm-core.h and all relevant DM core .c files have been updated to include dm-core.h rather than dm.h DM targets should _never_ include dm-core.h! [block core merge conflict resolution from Stephen Rothwell] Signed-off-by: Mike Snitzer Signed-off-by: Stephen Rothwell

dm: set DM_TARGET_WILDCARD feature on "error" target

2016-02-22T16:06:21+00:00

The DM_TARGET_WILDCARD feature indicates that the "error" target may replace any target; even immutable targets. This feature will be useful to preserve the ability to replace the "multipath" target even once it is formally converted over to having the DM_TARGET_IMMUTABLE feature. Also, implicit in the DM_TARGET_WILDCARD feature flag being set is that .map, .map_rq, .clone_and_map_rq and .release_clone_rq are all defined in the target_type. Signed-off-by: Mike Snitzer

dm: allocate requests in target when stacking on blk-mq devices

2015-02-09T18:06:47+00:00

For blk-mq request-based DM the responsibility of allocating a cloned request is transfered from DM core to the target type. Doing so enables the cloned request to be allocated from the appropriate blk-mq request_queue's pool (only the DM target, e.g. multipath, can know which block device to send a given cloned request to). Care was taken to preserve compatibility with old-style block request completion that requires request-based DM _not_ acquire the clone request's queue lock in the completion path. As such, there are now 2 different request-based DM target_type interfaces: 1) the original .map_rq() interface will continue to be used for non-blk-mq devices -- the preallocated clone request is passed in from DM core. 2) a new .clone_and_map_rq() and .release_clone_rq() will be used for blk-mq devices -- blk_get_request() and blk_put_request() are used respectively from these hooks. dm_table_set_type() was updated to detect if the request-based target is being stacked on blk-mq devices, if so DM_TYPE_MQ_REQUEST_BASED is set. DM core disallows switching the DM table's type after it is set. This means that there is no mixing of non-blk-mq and blk-mq devices within the same request-based DM table. [This patch was started by Keith and later heavily modified by Mike] Tested-by: Bart Van Assche Signed-off-by: Keith Busch Signed-off-by: Mike Snitzer

dm: allow error target to replace bio-based and request-based targets

2013-09-06T00:46:05+00:00

It may be useful to switch a request-based table to the "error" target. Enhance the DM core to allow a hybrid target_type which is capable of handling either bios (via .map) or requests (via .map_rq). Add a request-based map function (.map_rq) to the "error" target_type; making it DM's first hybrid target. Train dm_table_set_type() to prefer the mapped device's established type (request-based or bio-based). If the mapped device doesn't have an established type default to making the table with the hybrid target(s) bio-based. Tested 'dmsetup wipe_table' to work on both bio-based and request-based devices. Signed-off-by: Mike Snitzer Signed-off-by: Joe Jin Signed-off-by: Jun'ichi Nomura Acked-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon

dm: rename request variables to bios

2013-03-01T22:45:47+00:00

Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: Alasdair G Kergon

dm: remove map_info

2012-12-21T20:23:41+00:00

This patch removes map_info from bio-based device mapper targets. map_info is still used for request-based targets. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon

dm: error return error for discards

2010-08-12T03:14:14+00:00

Have the error target respond to a discard request with a hard -EIO rather than fail the request with -EOPNOTSUPP. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn