talos-op-linux/drivers/gpu/drm/rockchip/Kconfig, branch master

drm/bridge/synopsys: dsi: driver-specific configuration of phy timings

2019-12-16T11:01:58+00:00

The timing values for dw-dsi are often dependent on the used display and according to Philippe Cornu will most likely also depend on the used phy technology in the soc-specific implementation. To solve this and allow specific implementations to define them as needed add a new get_timing callback to phy_ops and call this from the dphy_timing function to retrieve the necessary values for the specific mode. Right now this handles the hs2lp + lp2hs where Rockchip SoCs need handling according to the phy speed, while STM seems to be ok with static values. changes in v5: - rebase on 5.5-rc1 - merge into px30 dsi series to prevent ordering conflicts changes in v4: - rebase to make it directly fit on top of drm-misc-next after all changes in v3: - check existence of phy_ops->get_timing in __dw_mipi_dsi_probe() - emit actual error when get_timing() call fails - add tags from Philippe and Yannick changes in v2: - add driver-specific handling, don't force all bridge users to use the same timings, as suggested by Philippe Suggested-by: Philippe Cornu Signed-off-by: Heiko Stuebner Reviewed-by: Philippe Cornu Tested-by: Yannick Fertre Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-2-heiko@sntech.de

drm/rockchip: Fix Kconfig indentation

2019-11-20T16:40:32+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20191120133348.6640-1-krzk@kernel.org

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drm: rockchip: introduce rk3066 hdmi

2019-03-31T12:24:30+00:00

The RK3066 HDMI TX serves as interface between a LCD Controller and a HDMI bus. A HDMI TX consists of one HDMI transmitter controller and one HDMI transmitter PHY. The interface has three (3) 8-bit data channels which can be configured for a number of bus widths (8/10/12/16/20/24-bit) and different video formats (RGB, YCbCr). Features: HDMI version 1.4a, HDCP revision 1.4 and DVI version 1.0 compliant transmitter. Supports DTV resolutions from 480i to 1080i/p HD. Master I2C interface for a DDC connection. HDMI TX supports multiple power save modes. The HDMI TX input can switch between LCDC0 and LCDC1. (Sound support is not included in this patch) Signed-off-by: Zheng Yang Signed-off-by: Johan Jonker Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20190330095639.14626-2-jbx6244@gmail.com

drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver

2018-10-30T13:06:15+00:00

Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare MIPI DSI host controller bridge and remove the old separate one. changes: v2: add err_pllref, remove unnecessary encoder.enable & disable correct spelling mistakes v3: call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind() fix typo, use of_device_get_match_data(), change some bind() logic into probe() add 'dev_set_drvdata()' v4: return -EINVAL when can not get best_freq add a clarifying comment when get vco add review tag v5: keep our power domain enabled while touching GRF v6: change func name dw_mipi_encoder_disable to dw_mipi_dsi_encoder_disable v7: none v8: Heiko add Archit's Review tag adapt to recent changes in the original rockchip-dsi driver beautify grf-handling split hw-setup (resources, dsi-host) from bind into probe v2-new: Heiko add SPDX header instead of license blurb drop old versioning to not confuse people v3-new: Heiko include ordering moved hwaccess from mode_set to enable callback move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps) v4-new: Heiko rebase against recent rockchip-dsi changes move to call component_add in the new glue host-attach Signed-off-by: Nickey Yang Signed-off-by: Brian Norris Reviewed-by: Brian Norris Reviewed-by: Sean Paul Reviewed-by: Archit Taneja Reviewed-by: Andrzej Hajda Signed-off-by: Heiko Stuebner Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-6-heiko@sntech.de

drm/rockchip: Add support for Rockchip Soc RGB output interface

2018-09-05T10:24:36+00:00

Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel and serial RGB data to panel or conversion chip. So add a feature-bit for vops to mark the ability for these direct outputs and add an internal encoder in that case, that can attach to bridge chipsor panels. Changes in v7: 1. forget to delete rockchip_rgb_driver and delete it. Changes in v6: 1. Update according to Heiko Stuebner' implemention, rgb output is part of vop's feature, should not register as a independent driver. Changes in v5: 1. add SPDX-License-Identifier tag Changes in v4: 1. add support px30; Changes in v3: 1. update for rgb-mode move to panel node. Changes in v2: 1. add error log when probe failed; 2. update name_to_output_mode() according to sean's suggest; 3. Fix uninitialized use of ret. Signed-off-by: Sandy Huang Reviewed-by: Sean Paul Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-3-heiko@sntech.de

drm/rockchip: fix coding style and incorrect description

2018-08-29T11:19:06+00:00

Align with other drivers, tab + 2 space key for description. and edp/hdmi/dsi can be used on both rk3288 and rk3399. Signed-off-by: Sandy Huang Reviewed-by: Enric Balletbo i Serra Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/1535442295-4007-1-git-send-email-hjc@rock-chips.com

drm/rockchip: add CONFIG_OF dependency for lvds

2017-11-06T15:31:17+00:00

Build-testing on randconfig kernels revealed a dependency in the newly added lvds sub-driver: drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_bind': drivers/gpu/drm/rockchip/rockchip_lvds.c:380:24: error: 'struct drm_bridge' has no member named 'of_node' remote = lvds->bridge->of_node; We could work around that in the code, adding a Kconfig dependency seems easier. Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS") Signed-off-by: Arnd Bergmann Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20171106135852.1355487-1-arnd@arndb.de

drm/rockchip: add PINCTRL dependency for LVDS

2017-10-13T01:43:16+00:00

The new driver fails to build when CONFIG_PINCTRL is disabled: drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config': drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info' if (lvds->pins && !IS_ERR(lvds->pins->default_state)) This adds the respective Kconfig dependency. Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS") Signed-off-by: Arnd Bergmann Acked-by: Mark Yao Signed-off-by: Mark Yao Link: https://patchwork.freedesktop.org/patch/msgid/20171005120957.485433-1-arnd@arndb.de

drm/rockchip: Add support for Rockchip Soc LVDS

2017-09-08T06:57:26+00:00

This adds support for Rockchip soc lvds found on rk3288 Based on the patches from Mark yao and Heiko Stuebner. Signed-off-by: Mark Yao Signed-off-by: Heiko Stuebner Signed-off-by: Sandy Huang Reviewed-by: Mark Yao Tested-by: Wadim Egorov Link: https://patchwork.freedesktop.org/patch/msgid/1504351737-136042-1-git-send-email-hjc@rock-chips.com Signed-off-by: Mark Yao