Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-02-03T22:10:18+00:00

Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...

Merge tag 'drm-msm-next-2020-01-14' of https://gitlab.freedesktop.org/drm/msm into drm-next

2020-01-20T04:09:43+00:00

+ sc7180 display + DSI support + a618 (sc7180) support + more UBWC (bandwidth compression) support + various cleanups to handle devices that use vs don't use zap fw, etc + usual random cleanups and fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/

drm/msm: update LANE_CTRL register value from default value

2020-01-07T16:26:30+00:00

LANE_CTRL register in latest version of DSI controller (v2.2) has additional functionality introduced to enable/disable HS signalling with default value set to enabled. To accommodate this change, LANE_CTRL register should be read and bit wise ORed to enable non continuous clock mode. Without this change, if register is written directly, HS signalling will be disabled resulting in black screen. Changes in v1: -Update LANE_CTRL register value Changes in v2: -Changing commit message accordingly. Signed-off-by: Harigovindan P Signed-off-by: Rob Clark

drm/msm: add DSI support for sc7180

2020-01-07T16:25:56+00:00

Add support for v2.4.1 DSI block in the sc7180 SoC. Changes in v1: -Modify commit text to indicate DSI version and SOC detail(Jeffrey Hugo). -Splitting visionox panel driver code out into a different patch(set), since panel drivers are merged into drm-next via a different tree(Rob Clark). Changes in v2: -Update commit text accordingly(Matthias Kaehlcke). Signed-off-by: Harigovindan P [cleanup subject / commit message] Signed-off-by: Rob Clark

clk: mux: Add support for specifying parents via DT/pointers

2020-01-07T07:10:05+00:00

After commit fc0c209c147f ("clk: Allow parents to be specified without string names") we can use DT or direct clk_hw pointers to specify parents. Create a generic function that shouldn't be used very often to encode the multitude of ways of registering a mux clk with different parent information. Then add a bunch of wrapper macros that only pass down what needs to be passed down to the generic function to support this with less arguments. Note: the msm drm driver passes an anonymous array through the macro which seems to confuse my compiler. Adding a parenthesis around the whole thing at the call site seems to fix it but it must be wrong. Maybe it's better to split this patch and pick out the array bits there? Cc: Rob Clark Cc: Sean Paul Cc: Manivannan Sadhasivam Signed-off-by: Stephen Boyd Link: https://lkml.kernel.org/r/20190830150923.259497-11-sboyd@kernel.org

drm/msm/dsi: split clk rate setting and enable

2020-01-04T16:52:04+00:00

Decouple enable and rate setting. Prep work to handle bootloader enabled display. Signed-off-by: Rob Clark Reviewed-by: Jeffrey Hugo

drm/msm/dsi: Delay drm_panel_enable() until dsi_mgr_bridge_enable()

2020-01-03T00:01:30+00:00

At the moment, the MSM DSI driver calls drm_panel_enable() rather early from the DSI bridge pre_enable() function. At this point, the encoder (e.g. MDP5) is not enabled, so we have not started transmitting video data. However, the drm_panel_funcs documentation states that enable() should be called on the panel *after* video data is being transmitted: The .prepare() function is typically called before the display controller starts to transmit video data. [...] After the display controller has started transmitting video data, it's safe to call the .enable() function. This will typically enable the backlight to make the image on screen visible. Calling drm_panel_enable() too early causes problems for some panels: The TFT LCD panel used in the Samsung Galaxy Tab A 9.7 (2015) (APQ8016) uses the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command to control backlight/brightness of the screen. The enable sequence is therefore: drm_panel_enable() drm_panel_funcs.enable(): backlight_enable() backlight_ops.update_status(): mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); The panel seems to silently ignore the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command if it is sent too early. This prevents setting the initial brightness, causing the display to be enabled with minimum brightness instead. Adding various delays in the panel initialization code does not result in any difference. On the other hand, moving drm_panel_enable() to dsi_mgr_bridge_enable() fixes the problem, indicating that the panel requires the video stream to be active before the brightness command is accepted. Therefore: Move drm_panel_enable() to dsi_mgr_bridge_enable() to delay calling it until video data is being transmitted. Move drm_panel_disable() to dsi_mgr_bridge_disable() for similar reasons. (This is not strictly required for the panel affected above...) Tested-by: Jasper Korten Signed-off-by: Stephan Gerhold Tested-by: Jeffrey Hugo Reviewed-by: Jeffrey Hugo Signed-off-by: Rob Clark

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54+00:00

drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

drm/panel: decouple connector from drm_panel

2019-12-09T21:57:26+00:00

To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Reviewed-by: Linus Walleij Acked-by: Jeffrey Hugo Cc: Thierry Reding Cc: Laurent Pinchart Cc: Sam Ravnborg Cc: Andrzej Hajda Cc: Neil Armstrong Cc: Jonas Karlman Cc: Jernej Skrabec Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: David Airlie Cc: Daniel Vetter Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Kukjin Kim Cc: Krzysztof Kozlowski Cc: Stefan Agner Cc: Alison Wang Cc: Philipp Zabel Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: CK Hu Cc: Matthias Brugger Cc: Marek Vasut Cc: Tomi Valkeinen Cc: Kieran Bingham Cc: Sandy Huang Cc: "Heiko Stübner" Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Chen-Yu Tsai Cc: Jonathan Hunter Cc: Torsten Duwe Cc: Vasily Khoruzhick Cc: Icenowy Zheng Cc: Sean Paul Cc: Linus Walleij Cc: Boris Brezillon Cc: Hariprasad Kelam Cc: Alexios Zavras Cc: Brian Masney Cc: Rob Clark Cc: Thomas Gleixner Cc: Allison Randal Cc: Shayenne Moura Cc: Abhinav Kumar Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org

Merge tag 'drm-msm-next-2019-11-05' of https://gitlab.freedesktop.org/drm/msm into drm-next

2019-12-02T00:21:12+00:00

+ OCMEM support to enable the couple generations that had shared OCMEM rather than GMEM exclusively for the GPU (late a3xx and I think basically all of a4xx). Bjorn and Brian decided to land this through the drm tree to avoid having to coordinate merge requests. + a510 support, and various associated display support + the usual misc cleanups and fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/

talos-op-linux/drivers/gpu/drm/msm/dsi, branch master