talos-op-linux/drivers/gpu/drm/ingenic, branch master

gpu/drm: ingenic: Add support for the JZ4770

2019-12-14T18:26:55+00:00

The LCD controller in the JZ4770 supports up to 720p. While there has been many new features added since the old JZ4740, which are not yet handled here, this driver still works fine. v2: No change Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-6-paul@crapouillou.net # *** extracted tags *** Acked-by: Sam Ravnborg

gpu/drm: ingenic: Check for display size in CRTC atomic check

2019-12-14T18:26:39+00:00

Check that the requested display size isn't above the limits supported by the CRTC. - JZ4750 and older support up to 800x600; - JZ4755 supports up to 1024x576; - JZ4760 and JZ4770 support up to 720p; - JZ4780 supports up to 2k. v2: No change Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-5-paul@crapouillou.net # *** extracted tags *** Acked-by: Sam Ravnborg

gpu/drm: ingenic: Set max FB height to 4095

2019-12-14T18:26:25+00:00

While the LCD controller can effectively only support a maximum resolution of 800x600, the framebuffer's height can be much higher, since we can change the Y start offset. v2: No change Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-4-paul@crapouillou.net # *** extracted tags *** Acked-by: Sam Ravnborg

gpu/drm: ingenic: Use the plane's src_[x,y] to configure DMA length

2019-12-14T18:26:10+00:00

Instead of obtaining the width/height of the framebuffer from the CRTC state, obtain it from the current plane state. v2: No change Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-3-paul@crapouillou.net # *** extracted tags *** Acked-by: Sam Ravnborg

gpu/drm: ingenic: Avoid null pointer deference in plane atomic update

2019-12-14T18:25:54+00:00

It is possible that there is no drm_framebuffer associated with a given plane state. v2: Handle drm_plane->state which can be NULL too Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-2-paul@crapouillou.net # *** extracted tags *** Acked-by: Sam Ravnborg

drm/bridge: panel: Infer connector type from panel by default

2019-09-08T17:04:23+00:00

The drm panel bridge creates a connector using a connector type explicitly passed by the display controller or bridge driver that instantiates the panel bridge. Now that drm_panel reports its connector type, we can use it to avoid passing an explicit (and often incorrect) connector type to drm_panel_bridge_add() and devm_drm_panel_bridge_add(). Several drivers report incorrect or unknown connector types to userspace. Reporting a different type may result in a breakage. For that reason, rename (devm_)drm_panel_bridge_add() to (devm_)drm_panel_bridge_add_typed(), and add new (devm_)drm_panel_bridge_add() functions that use the panel connector type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed function, they will be converted one by one after testing. The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection and fixes to indentation. @@ expression bridge; expression dev; expression panel; identifier type; @@ ( -bridge = drm_panel_bridge_add(panel, type); +bridge = drm_panel_bridge_add_typed(panel, type); | -bridge = devm_drm_panel_bridge_add(dev, panel, type); +bridge = devm_drm_panel_bridge_add_typed(dev, panel, type); ) Signed-off-by: Laurent Pinchart Reviewed-by: Boris Brezillon Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com

drm/ingenic: Hardcode panel type to DPI

2019-08-29T09:58:19+00:00

The ingenic driver supports DPI panels only at the moment, so hardcode their type to DPI instead of Unknown. Signed-off-by: Laurent Pinchart Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20190823212353.29369-1-laurent.pinchart@ideasonboard.com # *** extracted tags *** Reviewed-by: Sam Ravnborg

drm: Stop including drm_bridge.h from drm_crtc.h

2019-08-28T20:11:03+00:00

We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by: Boris Brezillon Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com

DRM: ingenic: Add support for panels with 8-bit serial bus

2019-07-01T22:38:57+00:00

Add support for the LCD panels with a serial 8-bit bus, where the color components of each 24-bit pixel are sent sequentially. Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20190627182114.27299-3-paul@crapouillou.net # *** extracted tags *** Reviewed-by: Sam Ravnborg

DRM: ingenic: Add support for Sharp panels

2019-07-01T22:38:15+00:00

Add support for the LCD panels that must be driven with the Sharp-specific signals SPL, CLS, REV, PS. An example of such panel is the LS020B1DD01D supported by the panel-simple DRM panel driver. Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20190627182114.27299-2-paul@crapouillou.net # *** extracted tags *** Reviewed-by: Sam Ravnborg